Thanks, thats clear for using telemFFB effects. What about changing configs in the main VPforce conf

Thanks, thats clear for using telemFFB effects. What about changing configs in the main VPforce config app for module specific ?I just ran DCS and used the F14, but it did not change the profile being used by vP force config from the default one I had loaded. I used the process as described above.....

mark turnerOP•2/13/24, 4:01 PM

if you have 5 minutes, it may be quicker and easier if we jumped in the voice channel?

mark turnerOP•2/13/24, 4:01 PM

save all the pesky typing...!

Mmark turner Thanks, thats clear for using telemFFB effects. What about changing configs in t...

Number481•2/13/24, 4:07 PM

tied up for another hour or so but can after that

mark turnerOP•2/13/24, 4:17 PM

great, thanks will ping you in an hour

AAnthony The WinWing adapter, can that be used **on Virpil’s extensions?** I’m consideri...

Anthony•2/13/24, 5:06 PM

@walmis any idea on how that’d work out?

mark turnerOP•2/13/24, 5:09 PM

Just to be 100% clear here as well, I am talking about automatically changing config files to match the aircraft you are flying in VPForce config, NOT the per module settings for the TelemFFB effects.

Mmark turner Just to be 100% clear here as well, I am talking about automatically changing co...

Number481•2/13/24, 5:10 PM

works the same way... free now if you want to jump in voice channel

mark turnerOP•2/13/24, 5:10 PM

cool, gimme 2 minutes willl be there

Mmark turner cool, gimme 2 minutes willl be there

Number481•2/13/24, 5:15 PM

I've tried 3 different mics on 2 different devices.. issue must be in between or on your side

AAnthony @walmis any idea on how that’d work out?

walmis•2/13/24, 5:54 PM

It would work technically, but I'm not sure about the mechanical connection. If the Z extension has a free cable i.e. not a rigid connector then it would be not a problem, otherwise it would be easy to break the WW adapter. In other words if you could mount a TM grip on the Z extension it should be good to go.

mark turnerOP•2/13/24, 6:06 PM

I use a Rhino with virpil Z extension and a hobby built grip with a thrustmaster type mount, it all works fine.

Aileron_Hubbard•2/13/24, 7:50 PM

For those of you with a winwing grip on your rhino and still using simapp pro will you please DM me and tell me how you got it to work please?

FlatSpin•2/13/24, 8:55 PM

to my knowlede simapp pro does not work with the rhino winwing grip adapter. That communication relies on the "orion" base to work.

scheppie_•2/13/24, 11:05 PM

is it normal that if i import default config my rhino is out of center for like 3 degrees to the right? and if i put endstops afther default apply the endstops are more to the right

FFlatSpin to my knowlede simapp pro does not work with the rhino winwing grip adapter. Th...

Aileron_Hubbard•2/13/24, 11:13 PM

Ah I see, thank you.

scheppie_•2/13/24, 11:43 PM

i dont know for sure but with those settings my vpforce is going bbbbrrrrrtttt en motor shuting down, those are profile settings for heli that i got from profile sharing, am i doing somthing wrong? or is my vpforce....

TrigaNZ•2/13/24, 11:44 PM

Try ditching Friction and Inertia for a start.

Sscheppie_i dont know for sure but with those settings my vpforce is going bbbbrrrrrtttt e...

walmis•2/14/24, 5:36 AM

Try damper and spring LPF settings 2Hz and 4Hz respectively

Sscheppie_i dont know for sure but with those settings my vpforce is going bbbbrrrrrtttt e...

PiNKSH!T•2/14/24, 6:33 AM

I think you need to turn down the Friction & intertia LPF Hz. NVM

why didn't I see the two answers above me? lol

scheppie_•2/14/24, 7:52 AM

So Is it like a lotto ticket for stable motors? Because this are settings from profile share... I really love the vpforce, it's a beast

but i try to understand why i can not use 3 out of 5 profile share settings

Sscheppie_So Is it like a lotto ticket for stable motors? Because this are settings from p...

PiNKSH!T•2/14/24, 8:09 AM

I wonder that about the different settings some ppl have compared to others too. It also seems to me that my x axis motor will be the one to shudder & cut out more than the y axis when I experiment with setting changes.

mark turnerOP•2/14/24, 10:10 AM

How do you edit and save values in an existing vpconf file? I have edited some values in some of mine and they appear to get saved to devices memory when you press store and apply, rather than the actual vpconf file. So when I fly the module again, it automatically loads the previous unedited version. Thanks

walmis•2/14/24, 10:11 AM

You need to export the settings into a file again

mark turnerOP•2/14/24, 10:19 AM

SR-F Wofei•2/14/24, 1:22 PM

hi, i got my rhino diy build. the axis are shown, but the grip will not work. I tried Thrustmater Warthog Grip and a Virpil grip. I measured the pins from Connector to connector, all cables are Ok.

walmis•2/14/24, 1:26 PM

Are you 100% sure the pinout is correct?

SR-F Wofei•2/14/24, 1:50 PM

yeah, i found the failure the wrong stick was configured. sorry

PPiNKSH!T I wonder that about the different settings some ppl have compared to others too....

Fierce_Fire•2/14/24, 6:41 PM

I assume grip matters a lot, mine is like 2x as heavy as its plastic variant

buzzbomb•2/14/24, 7:52 PM

i submitted a pre-order from on the 11th of feb. when i run the info command with my email address i get "The application did not respond" Is the app down or is my pre-order not in the system yet?

Wwalmis I know a few RS users that successfully use their grips, so this instance is kin...

Brizzly•2/15/24, 2:19 AM

Can you confirm which grip type I should select?

Caprice•2/15/24, 2:43 AM

Hello, very much enjoying my Rhino. Have noticed some clicking when pushing against it even with fairly gentle pressure. I can record a video to document this if needed. It seems mechanical.

CCaprice Hello, very much enjoying my Rhino. Have noticed some clicking when pushing agai...

Asdforce•2/15/24, 3:24 AM

I had some clicks/clunks when moving against spring forces. Also a slight nudge could be felt on the stick. Eneded up being the bolts on the big pulleys. I tightened each by 1/8 turn and it's better now.

AAsdforce I had some clicks/clunks when moving against spring forces. Also a slight nudge ...

Caprice•2/15/24, 3:37 AM

thank you, are those the ones that hold in the belts on the outside?

Asdforce•2/15/24, 3:40 AM

You're welcome. Yep, five bolts on each pulley. Hopefully it's that simple and not something else.

luap14.•2/15/24, 9:35 AM

Hello has anyone a good recomendation for whear to metall 3d printing the Joystick mount

Bbuzzbomb i submitted a pre-order from on the 11th of feb. when i run the info command wi...

walmis•2/15/24, 11:46 AM

You can try again

Swoop•2/15/24, 12:44 PM

Hey all - building my own DIY Rhino and have got to the point where i need to order steppers and USB interface. Any advice on which ones to go for?

SSwoop Hey all - building my own DIY Rhino and have got to the point where i need to or...

TheAmazinGreat•2/15/24, 1:57 PM

If you are building from the files that are getting shared here, most, if not all, of them are only designed for the 57 series motors. The big motors won’t fit the same housing.

Swoop•2/15/24, 1:58 PM

Perfect! Thanks @TheAmazinGreat. Final thing, The Thrustmaster warthog grip works as standard doesnt it? I dont need an adapter or anything?

MichalK•2/15/24, 2:13 PM

No adapter needed.

Swoop•2/15/24, 2:40 PM

Thanks!

BBrizzly Can you confirm which grip type I should select?

Brizzly•2/15/24, 3:04 PM

Nevermind, it must have been a bad connection in my extension. I took everything apart to make sure I didn't have any bent pins, and it works now after putting everything back together. Weird that the grip was getting power, but buttons weren't registering on the Rhino, but all is well now.

bert•2/16/24, 12:11 AM

Hi, i need some help with the A2A Comanche. I can't get autopilot following to work, did some searching in this channel but found no solutions. The TelemFFB software is running fine otherwise, all the effects are working, axis are not bound in MSFS.

smitty•2/16/24, 12:30 AM

do you have the 1.0 release or the WIP version with GUI?

Wwalmis You can try again

buzzbomb•2/16/24, 12:51 AM

it started working yesterday evening...thanks for following up!

Ssmitty do you have the 1.0 release or the WIP version with GUI?

bert•2/16/24, 2:14 AM

You mean the Telem software right? I got the GUI version, should i try another?

smitty•2/16/24, 2:16 AM

just making sure, someone the other day was having trouble with the a2a and was using the 'stable' 1.0 version. if you have a bunch of purple sliders, you shoudl be good. what are symptoms exactly

bert•2/16/24, 2:19 AM

bunch of purple ones, some green ones, all effects are working fine and are tuneable. only the autopilot following setting is not working, yoke moves around when i do autopilot turns, but the rhino stays centered

smitty•2/16/24, 2:22 AM

are all the sliders inside axis control at default settings?

bert•2/16/24, 2:23 AM

yes, similar settings

Thanks, thats clear for using telemFFB effects. What about changing configs in the main VPforce conf

Similar Threads