@Bird*dog after looking at the website it looks like u have a older version of the pedal mount that

@Bird*dog after looking at the website it looks like u have a older version of the pedal mount that they sell would you be able to give me some photos of your mounts i would like to see how they are constructed

LLeddhedd i had a quick question, if anyone happened to know the answer. for the DIY or in...

smitty•2/13/24, 8:06 PM

On power up it reads the absolute single turn encoder position. It uses the previously stored min/max as the axis limits.

Leddhedd•2/13/24, 8:13 PM

oh okay thats super interesting! is that a physical encoder being turned, or part of the servo control stuff on the back of the motor?

SStryker990 @Bird*dog after looking at the website it looks like u have a older version of t...

Bird*dog•2/13/24, 8:18 PM

Yeah no problem, I’ll DM you

LLeddhedd oh okay thats super interesting! is that a physical encoder being turned, or par...

smitty•2/13/24, 8:32 PM

It’s on the back of the motor

Leddhedd•2/13/24, 8:38 PM

ah okay, so how did that accommodate for multiple motor rotations?

Leddhedd•2/13/24, 8:38 PM

or is this just a right encoder for the job kinda thing

Leddhedd•2/13/24, 8:43 PM

im sure i remember @walmis posting about this not being a problem a while back when i got my kit, im aware there are "single throw" absolute encoders that can rotate multiple times as part of their entire throw, but i think i remember it being a software fix or something

LLeddhedd ah okay, so how did that accommodate for multiple motor rotations?

Fierce_Fire•2/13/24, 9:28 PM

If your system allows multiple rotations you should make sure it's within the correct rotation upon startup(ie if one rotation is 10° movement it should be within 5° either side of the center)

smitty•2/13/24, 10:02 PM

Yea that’s why I size the gear or belt ratio to use just short of 1 full motor rotation

VPforceBot•2/14/24, 9:42 AM

:package:

RHINO #0400 Has Shipped!

Knuck👨✈•2/14/24, 9:45 AM

Just finishing up the order form @walmis, do you know if the VP Force mounting plate fits the Rhino FFB base? Thinking the plate might fit the NLR sim seat I have. Thanks again.

KKnuck👨✈Just finishing up the order form @walmis, do you know if the VP Force mounting p...

walmis•2/14/24, 9:49 AM

The plate is specifically designed for Rhino

Knuck👨✈•2/14/24, 9:57 AM

Thought so, thank you mate, order form filled out!

TripRodriguez•2/14/24, 2:09 PM

Hey guys, I'm about to 3D print my throw limiters (found in the knowledge base section) and was wondering, what is the native maximum throw in degrees for the Rhino?

AndyHill•2/14/24, 2:24 PM

22 I think

VPforceBot•2/14/24, 2:40 PM

:package:

RHINO #0401 Has Shipped!

AAndyHill 22 I think

TripRodriguez•2/14/24, 3:07 PM

Thanks. Ideally I wanted 21 aft, and since the default on the limiters was 20 I wanted to make sure 21 was ok.

Carlos NO2•2/14/24, 3:08 PM

I love popping in here and seeing more and more Rhinos shipping out. It’s like a rolling Christmas for other people.

TripRodriguez•2/14/24, 3:11 PM

Also, @walmis I just want to say thank you for finally giving us a good force feedback stick that blows the MS FFB2 out of the water in every way possible. I've got #0022 and I absolutely love it.

TripRodriguez•2/14/24, 3:13 PM

On a different note, I feel sure that the software throw limiter generates substantially heavier pull than DCS aircraft when I set everything to max. Is there a way to get DCS aircraft to truly use the Rhino to it's true potential? I confess I haven't yet read the WIP manual, I'm buried in projects right now.

VPforceBot•2/15/24, 9:08 AM

:package:

RHINO #0402 Has Shipped!

VPforceBot•2/15/24, 10:04 AM

:package:

RHINO #0403 Has Shipped!

MGBDave•2/16/24, 11:44 AM

Does anyone have a recommended MSFS Flying Iron Spitfire TelemFFB profile they would be willing to share?

TTripRodriguez On a different note, I feel sure that the software throw limiter generates subst...

TeufelHunden•2/16/24, 12:21 PM

So you’re saying the stick is not giving enough force or too much? I’m just curious.

Rogue Dragon•2/16/24, 4:03 PM

What's current lead time for 57BLF03 motors?

RRogue Dragon What's current lead time for 57BLF03 motors?

Fierce_Fire•2/16/24, 4:10 PM

Motor kit is like a few days, think I had confirmation of sending like a day after purchase

FFierce_Fire Motor kit is like a few days, think I had confirmation of sending like a day aft...

Rogue Dragon•2/16/24, 4:12 PM

And as long as I follow a guide like this I should be fine, right? https://github.com/Gadroc/vpforce-ffb-joystick?tab=readme-ov-file

GitHub

GitHub - Gadroc/vpforce-ffb-joystick: FFB Joystick designed around ...

FFB Joystick designed around VPForceControl kits. Contribute to Gadroc/vpforce-ffb-joystick development by creating an account on GitHub.

RRogue Dragon And as long as I follow a guide like this I should be fine, right? https://githu...

Fierce_Fire•2/16/24, 4:51 PM

Fairly likely, I haven't checked/used those but I believe they're pretty complete

Fierce_Fire•2/16/24, 4:51 PM

And there is always this discord for any questions

RRogue Dragon And as long as I follow a guide like this I should be fine, right? https://githu...

FlatSpin•2/16/24, 5:33 PM

If you get stuck, he's here somewheres you can always ping him.

RRogue Dragon And as long as I follow a guide like this I should be fine, right? https://githu...

MGBDave•2/16/24, 6:03 PM

I just completed a DIY build from Protomakers guide and plans, which I found to be excellent, and it looks like the site you posted from Gadroc has a few changes to the gimbal components and the addition of screw inserts, but is very similar, and he recommends following Protomakers guide: https://github.com/protomaker964/Rhino-FFB-Clone-3D_Printed?search=1

GitHub

Rhino-FFB-Clone-3D_Printed/ at main · protomaker964/Rhino-FFB-Clone...

3D print files, parts list and instructions to build a DIY version of the Rhino FFB Stick base using the VPForce motor kit - protomaker964/Rhino-FFB-Clone-3D_Printed

TC-Durham•2/17/24, 2:03 AM

I swapped my base so instead of the red button being toward me, it is now to the side, effectively bringing the joystick base closer to the seat (my bum). I then swapped X and Y in DCS, but now the force trim does the opposite of what I want. It places the trimmer where the stick is, but on release does the reverse of what I want. Is there a fix for this or should I just go back to where I started with the big red button facing backward toward the chair?

TC-Durham•2/17/24, 2:03 AM

I guess I am asking is there a way to swap x and y in the vp rhino software?

smitty•2/17/24, 3:44 AM

swap axes and invert as needed in configurator. leave the game as it was