Mine is side mounted with Monstertech mounts. Whether you consider that budget friendly though 🤷♂️
Mine is side mounted with Monstertech mounts. Whether you consider that budget friendly though 
SI tried desk mounting but my desk isn’t that strong and it limited me. I do want a full rig style one. I like the racing sim ones just without the angled racing chair and with actual mounting options
HYeah, desk mount won't cut it, mine's still chair mounted and that works well
SOh I see!
SI’ll consider it but I rarely fly anything with side mounting
SThe main thing I fly is going to be the Phantom
HYou get used to it, even on planes that should be center
SAnd then the Eurofighter when thats out
Ftrack racer, sim labs, race anywhere
SI think I had a GT1 Evo back in my simracing days. Tempted to get another one and work out how to make it for flight sims
FThe price isn't bad minus the seat
FI added monstertech mounts to my p1-x
SOh thats not a bad shout. Just need to figure out a good seat with the cut out
F@adam1220. you in the states or elsewhere. If so, the work is already done with a simfab seat.
Sgermany!
F@adam1220. ahh, could always just modify a car seat. Or, it just popped in my head, I believe the NLR seats are available individually now. https://nextlevelracing.com/products/flight-simulator-seat/
Next Level Racing
SIll give that a look?
V:package: 
RHINO #0416 Has Shipped!
RHINO #0416 Has Shipped!V:package: 
RHINO #0417 Has Shipped!
RHINO #0417 Has Shipped!
SHi! I'm new and read good reviews about the ffb system 
How long is the waiting list right now?
If I choose to assemble a kit myself, how long do I have to wait for the kit to arrive (Germany)? and how complicated is it to assemble?
How long is the waiting list right now?
If I choose to assemble a kit myself, how long do I have to wait for the kit to arrive (Germany)? and how complicated is it to assemble?
F!status
VHey @Fr4Ged,
So the last Shipped RHINO is #0417 on 2024-02-26
Average waiting time from preorder to shipped is 213 days, median is 223 days, max is 433 days
411 Rhinos are shipped in total
So the last Shipped RHINO is #0417 on 2024-02-26
Average waiting time from preorder to shipped is 213 days, median is 223 days, max is 433 days
411 Rhinos are shipped in total
SAfaik the kits are less just assemble them and more u get the motors and the controlboard and the rest u gotta make yourself if u arent a builder just preorder a rhino now and if u dont want it in the end u can always cancel
Fyes, the kits are basically: here are the motors and control board, figure out the power supply, grip interface and gimbal yourself
Fthere are some build kits others have made for the diy kits though, often for the 57 motor variant
RAnyone noticed flap setting (Half/Full) offsets rudder spring center to the left for DCS F-18? I'm thinking it's a bug on the DCS, just wonder if anyone else see the same. It could be just me but the FFB value for the rudder from the DCS F-18 feels like it's based only on one side of rudder surface, while it should be the average of both left and right. If it was normal spring rudder pedal it probably wouldn't matter but FFB seems taking hit on this.
SAnyone know the turnaround time on the motor/pcb kits?
Ntelemffb does look only at right rudder since the trim following code is written in a generic way and the right rudder is the only value with data when an aircraft only has one vertical stabilizer. If it averaged both, then for those single rudder aircraft it would only ever be %50 of the actual value.
In order to resolve this on the hornet, it will require special code just for that module to account for the fact that the rudders toe-in with flaps
In order to resolve this on the hornet, it will require special code just for that module to account for the fact that the rudders toe-in with flaps
MCouple of days usually. The bigger motors were having supply issues though
RAh, that totally explains! The special code would be super, I'll just compensate it like flying warbirds for now. Thank you again, I appreciate a lot!
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
Shey guys. i remember to have seen a 3D printzed pulley cover somewhere.
Anyone maybe able to point me in the right direction.
Anyone maybe able to point me in the right direction.
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=16)
TI had this, but I fixed it, sorry I can’t recall how, but it was easy.
GHow are the joysticks connected to the rhino? are they custom built or are it is compatible with ones built by thrustmaster for example
BYou mean the grips ?
If so yeah, same connector as the thrustmasters or virpil grips.
If so yeah, same connector as the thrustmasters or virpil grips.
Aadapters available for vkb (not the latest gen yet?) and winwing
MI just bought the COWS DA-42 for MSFS, but not having any luck at all trying to get the ailerons/elevator axis to be controlled by TelemFFB. It jumps between actual stick position and centered many times per second, as if there is a conflicting input - but I have nothing else assigned to those axis. It works fine in every other plane. Very odd. I don't think they are using a custom simconnect variable, but how could I find out?
NI dont have the aircraft but I see this on their discord. The probably has the info you need.
Nlook at the document as specified for setting up SPAD/FSUIPC.. will have the same L:var info you need for TelemFFB
MWow! Thanks for the amazingly fast response. I will check out that info and post an update back here.
CHi guys, I’m currently on the waiting list and with the current numbers it’s looking like I may get invoiced around June / July. Sadly my car has just cost me all my savings, after it broke down. Does anyone know if there is a way I can request my order get delayed until later on In the year, ( October / November ish ) to allow me to save up again?
DSuper, super excited to hear the blurb about “FFB” in the latest z Heatblur F-4E video.
RI'll try the special code from Number481. Thanks anyway though!
Phey m8, I'd talk to walmis maybe he can swap your #SN with a later one?
C@PiNKMuD hey there, ok thanks for that I’ll send him a PM
Sthanks mate. This one doesnt fit all too well. I constructed one for the DIY i used wich is designed to simply be put in place with doublesided tape.
Sdidnt try em out yet. but currently printing.
Sfor anyone who also needs some cause of curious cats or babies that crawl around
Sprobably this should rather go to DIY-forum? Apologies if so.
WYou can make a new thread in #
knowledge-base
knowledge-base
SOK, will do. thanks!
