Hi! I'm new and read good reviews about the ffb system 🙂 How long is the waiting list right now? I

Hi! I'm new and read good reviews about the ffb system

How long is the waiting list right now?
If I choose to assemble a kit myself, how long do I have to wait for the kit to arrive (Germany)? and how complicated is it to assemble?

Fr4Ged•2/26/24, 11:32 AM

!status

FFr4Ged !status

VPforceBot•2/26/24, 11:32 AM

Hey @Fr4Ged,
So the last Shipped RHINO is #0417 on 2024-02-26
Average waiting time from preorder to shipped is 213 days, median is 223 days, max is 433 days
411 Rhinos are shipped in total

SSchneeflocke Hi! I'm new and read good reviews about the ffb system 🙂 How long is the waiti...

Stryker990•2/26/24, 2:33 PM

Afaik the kits are less just assemble them and more u get the motors and the controlboard and the rest u gotta make yourself if u arent a builder just preorder a rhino now and if u dont want it in the end u can always cancel

Fierce_Fire•2/26/24, 2:37 PM

yes, the kits are basically: here are the motors and control board, figure out the power supply, grip interface and gimbal yourself

Fierce_Fire•2/26/24, 2:38 PM

there are some build kits others have made for the diy kits though, often for the 57 motor variant

R7-Cedar•2/26/24, 3:51 PM

Anyone noticed flap setting (Half/Full) offsets rudder spring center to the left for DCS F-18? I'm thinking it's a bug on the DCS, just wonder if anyone else see the same. It could be just me but the FFB value for the rudder from the DCS F-18 feels like it's based only on one side of rudder surface, while it should be the average of both left and right. If it was normal spring rudder pedal it probably wouldn't matter but FFB seems taking hit on this.

Shinjo B•2/26/24, 3:51 PM

Anyone know the turnaround time on the motor/pcb kits?

RR7-Cedar Anyone noticed flap setting (Half/Full) offsets rudder spring center to the left...

Number481•2/26/24, 4:26 PM

telemffb does look only at right rudder since the trim following code is written in a generic way and the right rudder is the only value with data when an aircraft only has one vertical stabilizer. If it averaged both, then for those single rudder aircraft it would only ever be %50 of the actual value.

In order to resolve this on the hornet, it will require special code just for that module to account for the fact that the rudders toe-in with flaps

SShinjo B Anyone know the turnaround time on the motor/pcb kits?

MashedPotato•2/26/24, 4:47 PM

Couple of days usually. The bigger motors were having supply issues though

NNumber481 telemffb does look only at right rudder since the trim following code is written...

R7-Cedar•2/26/24, 4:51 PM

Ah, that totally explains! The special code would be super, I'll just compensate it like flying warbirds for now. Thank you again, I appreciate a lot!

SR-F_Winger_[73]_David•2/26/24, 5:44 PM

hey guys. i remember to have seen a 3D printzed pulley cover somewhere.
Anyone maybe able to point me in the right direction.

SSR-F_Winger_[73]_David hey guys. i remember to have seen a 3D printzed pulley cover somewhere. Anyone m...

mechsicko•2/26/24, 5:51 PM

https://discord.com/channels/965234441511383080/1169287017268531225/1169287214656663622

RR7-Cedar Anyone noticed flap setting (Half/Full) offsets rudder spring center to the left...

TrigaNZ•2/26/24, 6:49 PM

I had this, but I fixed it, sorry I can’t recall how, but it was easy.

Galaxy•2/26/24, 10:07 PM

How are the joysticks connected to the rhino? are they custom built or are it is compatible with ones built by thrustmaster for example

Bob Bushman•2/26/24, 10:09 PM

You mean the grips ?
If so yeah, same connector as the thrustmasters or virpil grips.

AndyHill•2/26/24, 10:34 PM

adapters available for vkb (not the latest gen yet?) and winwing

MGBDave•2/26/24, 11:22 PM

I just bought the COWS DA-42 for MSFS, but not having any luck at all trying to get the ailerons/elevator axis to be controlled by TelemFFB. It jumps between actual stick position and centered many times per second, as if there is a conflicting input - but I have nothing else assigned to those axis. It works fine in every other plane. Very odd. I don't think they are using a custom simconnect variable, but how could I find out?

MMGBDave I just bought the COWS DA-42 for MSFS, but not having any luck at all trying to ...

Number481•2/26/24, 11:34 PM

I dont have the aircraft but I see this on their discord. The probably has the info you need.

Number481•2/26/24, 11:37 PM

look at the document as specified for setting up SPAD/FSUIPC.. will have the same L:var info you need for TelemFFB

NNumber481 I dont have the aircraft but I see this on their discord. The probably has the ...

MGBDave•2/26/24, 11:49 PM

Wow! Thanks for the amazingly fast response. I will check out that info and post an update back here.

Cowboy10uk•2/27/24, 1:02 AM

Hi guys, I’m currently on the waiting list and with the current numbers it’s looking like I may get invoiced around June / July. Sadly my car has just cost me all my savings, after it broke down. Does anyone know if there is a way I can request my order get delayed until later on In the year, ( October / November ish ) to allow me to save up again?

Duchess ✈•2/27/24, 1:47 AM

Super, super excited to hear the blurb about “FFB” in the latest z Heatblur F-4E video.

TTrigaNZ I had this, but I fixed it, sorry I can’t recall how, but it was easy.

R7-Cedar•2/27/24, 3:02 AM

I'll try the special code from Number481. Thanks anyway though!

CCowboy10uk Hi guys, I’m currently on the waiting list and with the current numbers it’s loo...

PiNKSH!T•2/27/24, 3:11 AM

hey m8, I'd talk to walmis maybe he can swap your #SN with a later one?

Cowboy10uk•2/27/24, 3:18 AM

@PiNKMuD hey there, ok thanks for that I’ll send him a PM

Mmechsicko https://discord.com/channels/965234441511383080/1169287017268531225/116928721465...

SR-F_Winger_[73]_David•2/27/24, 12:52 PM

thanks mate. This one doesnt fit all too well. I constructed one for the DIY i used wich is designed to simply be put in place with doublesided tape.

SR-F_Winger_[73]_David•2/27/24, 12:53 PM

didnt try em out yet. but currently printing.

Bildschirmfoto_2024-02-27_um_11.53.26.png

X-Cover.stl75.96KB

Y-Cover.stl64.68KB

SR-F_Winger_[73]_David•2/27/24, 12:53 PM

for anyone who also needs some cause of curious cats or babies that crawl around

SR-F_Winger_[73]_David•2/27/24, 12:55 PM

probably this should rather go to DIY-forum? Apologies if so.

SSR-F_Winger_[73]_David probably this should rather go to DIY-forum? Apologies if so.

walmis•2/27/24, 1:15 PM

You can make a new thread in #

knowledge-base

Wwalmis You can make a new thread in #📙knowledge-base

SR-F_Winger_[73]_David•2/27/24, 1:34 PM

OK, will do. thanks!

VPforceBot•2/27/24, 1:53 PM

:package:

RHINO #0418 Has Shipped!

VPforceBot•2/27/24, 1:53 PM

:package:

RHINO #0419 Has Shipped!

Glaive(Rikk)•2/27/24, 1:56 PM

Can around advise how I get rid of this popping up as once it does I can't click on it or remove it in anyway.

GGlaive(Rikk)Can around advise how I get rid of this popping up as once it does I can't click...

walmis•2/27/24, 1:59 PM

If you make chrome or brave default browser it should override this one, Edge has some kind of bug that you cannot close it

Glaive(Rikk)•2/27/24, 2:00 PM

I use forefox as my default browser, don't really want to change that

walmis•2/27/24, 2:00 PM

or disable WebUSB device detection: about://flags/#enable-webusb-device-detection

Glaive(Rikk)•2/27/24, 2:00 PM

I'll try that again as I did disable it but it dodn't change anything

VPforceBot•2/27/24, 2:43 PM

:package:

RHINO #0420 Has Shipped!

MMGBDave I just bought the COWS DA-42 for MSFS, but not having any luck at all trying to ...

smitty•2/28/24, 2:50 AM

these are working for me in the COWS DA42's

MGBDave•2/28/24, 3:04 AM

Yes agreed. Tested tonight. I did try the manual scaling as the lvar was listed as +-100% but the correct scale is +-1 as you show there.

VPforceBot•2/28/24, 9:07 AM

:package:

RHINO #0421 Has Shipped!

VPforceBot•2/28/24, 1:24 PM

:package:

RHINO #0422 Has Shipped!

Virus•2/28/24, 1:55 PM

@walmis the bot /info command is not working at the moment...just to tell you

CaiJ•2/28/24, 1:56 PM

Has anyone figured out how to get FFB to give vibrations and such in helicopters in DCS?

Edit nvm

VVirus @walmis the bot /info command is not working at the moment...just to tell you

walmis•2/28/24, 1:56 PM

Try again

Virus•2/28/24, 1:57 PM

Fixed

VPforceBot•2/28/24, 3:30 PM

:package:

RHINO #0423 Has Shipped!

VVPforceBot :package: 🇧🇪 **RHINO #0422** Has Shipped!

Knuck👨✈•2/28/24, 5:46 PM

That’s me!! It’s arrived already so fully pumped to get started on it!

Bblave549 I might've missed earlier discussion about this, but (a) what grip is that and (...

CaptFlushGarden (John Liberto)•2/28/24, 5:47 PM

sorry for late reply, I bought a fairly expensive warthog extension on ebay, and used the bottom cap to screw it onto the rhino and bought a 45 degree aluminum tube and cut it to size and ran the wire through a hole in the front

Hi! I'm new and read good reviews about the ffb system 🙂 How long is the waiting list right now? I

Similar Threads

Similar Threads

Similar Threads