Is there any source to learn RTOS, I want to know more about it
Is there any source to learn RTOS, I want to know more about it
NFreeRTOS
RTOS idle task and the FreeRTOS idle task hook
Yi have added this block before thr t_axis_data of the dma what do you think: module EndianSwap(
input [31:0] InputData,
output reg [31:0] OutputData
);
always @ (InputData)
begin
OutputData[31:24] = InputData[7:0];
OutputData[23:16] = InputData[15:8];
OutputData[15:8] = InputData[23:16];
OutputData[7:0] = InputData[31:24];
end
endmodule
input [31:0] InputData,
output reg [31:0] OutputData
);
always @ (InputData)
begin
OutputData[31:24] = InputData[7:0];
OutputData[23:16] = InputData[15:8];
OutputData[15:8] = InputData[23:16];
OutputData[7:0] = InputData[31:24];
end
endmodule
KHi Fellow DevHeads,
Mr. André Kühne wrote the sequel to my Hackaday article (https://hackaday.com/2024/03/18/proper-routing-makes-for-many-happy-return-paths/). Check it out here: https://embeetle.com/#blog/return-currents-sequel
Thank you André!
Mr. André Kühne wrote the sequel to my Hackaday article (https://hackaday.com/2024/03/18/proper-routing-makes-for-many-happy-return-paths/). Check it out here: https://embeetle.com/#blog/return-currents-sequel
Thank you André!
HackadayDan Maloney
Here’s a question for you: when your PCB has a ground plane layer, where do return signals flow? It seems like a trick question, but as [Kristof Mulier] explains, there’s more to return…
K
TAwesome!
K
ASorry for the late reply @Phoenix
The internship was related to TI's TIVA and SimpleLink based low speed driver integration and product testing. I'm interested in IoT as well.
The startup is working on smart and handheld medical equipment development and gives service to redesign of system with new features as per requirement.
Thank you for asking
The internship was related to TI's TIVA and SimpleLink based low speed driver integration and product testing. I'm interested in IoT as well.
The startup is working on smart and handheld medical equipment development and gives service to redesign of system with new features as per requirement.
Thank you for asking
A
AIf i got another ram slot like the one highlighted in blue could i ball it to the red slot?
S@pemcilwarrior12 Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!
S@Dev Bishnoi Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!
S@mark Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!
WGood morning everyone,i am developing a project that translates voice to sign language using a 3D avatar. I am looking how to convert voice to sign language using a 3D avatar , i am using raspberry and mic
Are there any existing avatars that i can use?
Are there any existing avatars that i can use?
YThere is an aws service for this, i don't remember it i'll look for it and get back to you
WHh okay
YYouTubeFrancesco Cucchiara
- ChatGPT is a great tool to get textual answers to almost any question with a natural-like language.
- AWS Polly is a TTS (Text-To-Speech) service which allows to generate speeches from arbitrary text in several languages.
- Oculus LipSync is a plugin for Unity that makes a rigged 3D model react to a speech sound, moving the lips basing on th...
WI will take a look thank you
PHello tech family
AHi my friend how are you
AYes you can, but it going to be a hard one
BCoursera
Learn RTOS or improve your skills online today. Choose from a wide range of RTOS courses offered from top universities and industry leaders. Our RTOS courses are perfect for individuals or for corporate RTOS training to upskill your workforce.
BBhey how are you?
AHi Sabrina
S@vector90 Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!
AI'm fine hbu, thanks for the course I'll give it a look
Byou can use kara technology
BKara Technologies
Content accessibility using a signing avatar. Accessible solutions are at the core of all that we do here at Kara. One of our main goals is finding smarter ways of using technology that will help build a better future for everyone, in all areas of life.
4Hello Experienced Discord Users,
I am currently working on my graduation project which involves creating a human following robot. I would greatly appreciate your expertise and assistance in this project. Specifically, I am looking for guidance on how to download the Raspberry Pi operating system on a Windows computer and the recommended size of an SD card for this task.
Thank you in advance for your help and support.
Best regards,
I am currently working on my graduation project which involves creating a human following robot. I would greatly appreciate your expertise and assistance in this project. Specifically, I am looking for guidance on how to download the Raspberry Pi operating system on a Windows computer and the recommended size of an SD card for this task.
Thank you in advance for your help and support.
Best regards,
S@ticosanjr Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!
UHi @406399 I'd suggest using 32 GB Micro SDCard. You can use Raspberry Pi Imager s/w which makes the entire process of writing OS image on SDcard easier than that of manually downloading RPi OS. https://www.raspberrypi.com/software/. I think for project you may need to interface Camera with RPi along with Computer Vision capabilities using OpenCV libs
MExactly, to download the Raspberry Pi operating system on a Windows computer, you can use the official Raspberry Pi Imager tool. Here is the open source repo :
@https://github.com/raspberrypi/rpi-imager
. As for the SD card size, a minimum of 8GB is recommended, but for better performance and storage capacity, consider using a 16GB or 32GB SD card. I wish u good luck with your project @406399
@https://github.com/raspberrypi/rpi-imager
. As for the SD card size, a minimum of 8GB is recommended, but for better performance and storage capacity, consider using a 16GB or 32GB SD card. I wish u good luck with your project @406399
GitHub
The home of Raspberry Pi Imager, a user-friendly tool for creating bootable media for Raspberry Pi devices. - raspberrypi/rpi-imager
MThanks, very resourceful
S@Evelyndz Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!
Wwelcome @406399 , actually i did try doing human following robot using multiple methodes , for indoor , i tried to use LIDAR.. it is a bit expensive but if ur univ provide u with it would be a great choice , also i tried using computer vision to identify the person .. the problem is the person have to always face the robot ( here am talking about recognizing a spesific person...) , also i tried using gps ... didn't give a really good result ... for any qst please feel free to ask
CGood evening.
I've tinkered with a set of 4 switches/pedals to generate keyboard shortcuts on PC.
Everything works perfectly with a Chinese clone of Arduino Pro Micro.
Are there any other Arduino boards with USB ports that also support the Keyboard.h library?
I tried the Nano... Incompatible.
Thank you.
I've tinkered with a set of 4 switches/pedals to generate keyboard shortcuts on PC.
Everything works perfectly with a Chinese clone of Arduino Pro Micro.
Are there any other Arduino boards with USB ports that also support the Keyboard.h library?
I tried the Nano... Incompatible.
Thank you.
MFor your project, you can consider Arduino Leonardo or Arduino Micro. Both boards have USB ports and support the Keyboard.h library, allowing you to generate keyboard shortcuts on your PC, very similar to the Arduino Pro Micro but offer compatibility with the Keyboard.h library
MObserve the Leanardo and Micro
AI would love to do this! Like a hard one as in i cant just use solder paste and a heat gun?
ACause thats alot of pins
A260 for so-dimm
CThanks 
C@Marvee Amasi and Mega32u4-MU should work, right? 
AThe violet solder mask goes wild
S@imbored Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!
S@Leah Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!
S Friendly reminder about Upcoming Event
ABOUT TO DISCUSS ON
When to Use an OS/RTOS
GET READY!!!
https://discord.com/invite/DPGdgr73?event=1218923815371935874
ABOUT TO DISCUSS ON
When to Use an OS/RTOS
GET READY!!!
https://discord.com/invite/DPGdgr73?event=1218923815371935874
S@shobhit94 Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!
SHi everyone I'm beginner learning about electronics that I can use to make product
AHeat gun if you are a beginner in soldering and Soldering iron if you are a pro
