Ran memtest86 and it was indeed a RAM issue. Thanks for looking at that log!
Ran memtest86 and it was indeed a RAM issue. Thanks for looking at that log!
DYes and it works!
You just have to manually setup the effects with his code. I wanted to add something to merge this to the telemffb but im not a dev for Elite Dangerous.
You just have to manually setup the effects with his code. I wanted to add something to merge this to the telemffb but im not a dev for Elite Dangerous.
Ngood find! was it failing hardware or a bad memory OC?
SNo OC applied for this test, so I'm thinking failing hardware. I suppose I need to narrow it down to a known good stick and test every slot to make sure I don't have a motherboard problem.
SSo neat! And thanks for your posts here about it. Do you happen to still have your file where you have set up effects?
RFFBeast just popped onto my radar. Thoughts?
RLooking at the spec list, the main things that stuck out to me was a higher peak torque, by quite a bit. But more expensive as well, starting at 900 EU
FRhino already feels like wrestling. no need for more. 
V"Forcefeed Beast"? that sounds like a farm thing
BI'm sure someone is going to keep making beefier and beefier units until someone literally breaks and arm.
RConsidering my 3rd most flown module is the bf109, and it was notorious for requiring excess of 60lbs of pull lol
Fsounds like a workout
Nsounds like you'd need a concrete subfloor and 1/2" lag bolts to secure the damn thing to the ground. Maybe when Gorilla Wrestling 2025 comes out and I want my arms ripped of "for realism".. I'll consider needing those forces.
DYea i can share it, i just barely got started to be honest but i set it up enough to be able to add many more effects if desired. I just dont play elite dangerous much is all. Ill try to post it here.
SPerfect 
I'll see about continuing your work from there (provided I get it to work properly to begin with)
I'll see about continuing your work from there (provided I get it to work properly to begin with)
FOnly real use for large force is longer arm, but with blf04 at 6:1 I already have too much force with a 55cm arm...
FAnyone have a source for the 5M HTD belt in random lengths? (and not joined at the ends)
DIf we could get a version in telemffb that would be ideal
MYou need the LL version (long length). Will look something like this: HTD 5M 15 LL
FOk, thanks.
MI have had good luck with seller Powge, on Ali and Amazon.. good prices and good quality
Flong delivery times. 
FSo I guess to be able to change the settings in TelemFFB I need to use the WiP version, right?
NNeed? No.
Want? Probably.
The old version is pretty cumbersome
Want? Probably.
The old version is pretty cumbersome
B'Stable' version of telem ffb compared to the wip is like 1982 flightsim vs msfs 2020.
BAdmittedly hyperbolic but the differences are huge.
Falso follow up question:
the Gazelle in DCS isn't really working with the trim right now or is it?
the Gazelle in DCS isn't really working with the trim right now or is it?
NAFAIK it works. You just have to enable the separate FFB setting in its special settings and make sure the FFB curve sliders on the same page are 0.
Fthere is a module specific FF option that I had to check mark. thanks for the hint!
RI can't wait for gorilla wrestling to come out so I can train to fly the bf109
Tanyone on that uses these with a winwing grip?
TLet me ask the same question but in a broader sense…. Coming from a Honeycomb Alpha yoke, if you could choose the best all-around grip, what would it be? Primarily for MSFS but I could see delving into the DCS world. Want to learn helis and of course still fly GA.
II'm ~80 Rhino's away from salvation. I didn't select any adapters when I did my pre-order form, can I change that when my order comes up?
Ayeah
Ayou should be able to go through a separate form when your turn is up (if i remember correctly) and you can pick everything you need then
Pif you want just one grip I would either get; VKB MCGU, Virpil t-50cm2 or Constelation Alpha, Winwing F-16 + EX extension. VKB needs the VPforce passthrough adapter which imo is a good thing as you can still use the powerful vkb config software, Virpil is plug & play with the Rhino & WW needs an adapter but will then work with RHino base. Either one of those three grips will give you the most function, apart from a few aircraft like the Kiowa you'll be able to cover every single keybind on any hotas grip.
ITelem wont start by double click
IAnd with cmd prompt I get this error
I
Ilatest version of Telem
SI had that issue with the latest version after it auto updated. Manually downloaded and installed the latest version and it worked.
IIn my case I manually downloaded it, installed the folder under Program Files folder, and when I click on Telem.exe nothing happens
II’m planning on topping my Rhino with a WW 16EX. Any thoughts?
II wanted a Virpil T-50CM2 but they seem to be out of stock.
TThat’s what I have. Love it.
MThe WW 16EX has my vote as well. Excellent.
AI prefer the 16 EX over T-50CM2
IAlright. That settles my decision lol. Thanks gents.
SMore buttons > anything else so yeah f-16ex is besto
TWith the WW adapter I find it tall enough, I don't need any extensions etc.
Chey everyone, just wondering how long it takes to get if i order one of these?