Yes and it works! You just have to manually setup the effects with his code. I wanted to add somethi

Yes and it works!
You just have to manually setup the effects with his code. I wanted to add something to merge this to the telemffb but im not a dev for Elite Dangerous.

SStains Ran memtest86 and it was indeed a RAM issue. Thanks for looking at that log!

Number481•3/22/24, 3:55 PM

good find! was it failing hardware or a bad memory OC?

Stains•3/22/24, 3:59 PM

No OC applied for this test, so I'm thinking failing hardware. I suppose I need to narrow it down to a known good stick and test every slot to make sure I don't have a motherboard problem.

DDr. No Yes and it works! You just have to manually setup the effects with his code. I w...

Spelljammer1•3/22/24, 4:34 PM

So neat! And thanks for your posts here about it. Do you happen to still have your file where you have set up effects?

Red Magic•3/22/24, 5:12 PM

FFBeast just popped onto my radar. Thoughts?

Red Magic•3/22/24, 5:13 PM

Looking at the spec list, the main things that stuck out to me was a higher peak torque, by quite a bit. But more expensive as well, starting at 900 EU

Fr4Ged•3/22/24, 5:46 PM

Rhino already feels like wrestling. no need for more.

Volk•3/22/24, 5:50 PM

"Forcefeed Beast"? that sounds like a farm thing

Bob Bushman•3/22/24, 6:23 PM

I'm sure someone is going to keep making beefier and beefier units until someone literally breaks and arm.

Red Magic•3/22/24, 7:05 PM

Considering my 3rd most flown module is the bf109, and it was notorious for requiring excess of 60lbs of pull lol

Fr4Ged•3/22/24, 7:17 PM

sounds like a workout

Number481•3/22/24, 7:26 PM

sounds like you'd need a concrete subfloor and 1/2" lag bolts to secure the damn thing to the ground. Maybe when Gorilla Wrestling 2025 comes out and I want my arms ripped of "for realism".. I'll consider needing those forces.

SSpelljammer1 So neat! And thanks for your posts here about it. Do you happen to still have yo...

Dr. NoOP•3/22/24, 7:28 PM

Yea i can share it, i just barely got started to be honest but i set it up enough to be able to add many more effects if desired. I just dont play elite dangerous much is all. Ill try to post it here.

DDr. No Yea i can share it, i just barely got started to be honest but i set it up enoug...

Spelljammer1•3/22/24, 8:51 PM

Perfect

I'll see about continuing your work from there (provided I get it to work properly to begin with)

NNumber481 sounds like you'd need a concrete subfloor and 1/2" lag bolts to secure the damn...

Fierce_Fire•3/22/24, 9:23 PM

Only real use for large force is longer arm, but with blf04 at 6:1 I already have too much force with a 55cm arm...

f15sim•3/22/24, 9:30 PM

Anyone have a source for the 5M HTD belt in random lengths? (and not joined at the ends)

SSpelljammer1 Perfect 🙌 I'll see about continuing your work from there (provided I get it to...

Dr. NoOP•3/22/24, 9:33 PM

If we could get a version in telemffb that would be ideal

Ff15sim Anyone have a source for the 5M HTD belt in random lengths? (and not joined at ...

mechsicko•3/22/24, 9:43 PM

You need the LL version (long length). Will look something like this: HTD 5M 15 LL

f15sim•3/22/24, 9:44 PM

Ok, thanks.

mechsicko•3/22/24, 9:44 PM

I have had good luck with seller Powge, on Ali and Amazon.. good prices and good quality

f15sim•3/22/24, 9:56 PM

long delivery times.

Fr4Ged•3/22/24, 10:24 PM

So I guess to be able to change the settings in TelemFFB I need to use the WiP version, right?

Number481•3/22/24, 10:42 PM

Need? No.

Want? Probably.
The old version is pretty cumbersome

Bob Bushman•3/22/24, 10:46 PM

'Stable' version of telem ffb compared to the wip is like 1982 flightsim vs msfs 2020.

Bob Bushman•3/22/24, 10:47 PM

Admittedly hyperbolic but the differences are huge.

Fr4Ged•3/22/24, 10:56 PM

also follow up question:
the Gazelle in DCS isn't really working with the trim right now or is it?

Number481•3/22/24, 11:07 PM

AFAIK it works. You just have to enable the separate FFB setting in its special settings and make sure the FFB curve sliders on the same page are 0.

NNumber481 AFAIK it works. You just have to enable the separate FFB setting in its special...

Fr4Ged•3/22/24, 11:55 PM

there is a module specific FF option that I had to check mark. thanks for the hint!

NNumber481 sounds like you'd need a concrete subfloor and 1/2" lag bolts to secure the damn...

Red Magic•3/23/24, 12:00 AM

I can't wait for gorilla wrestling to come out so I can train to fly the bf109

thedicecooler•3/23/24, 12:05 AM

anyone on that uses these with a winwing grip?

Tthedicecooler anyone on that uses these with a winwing grip?

Toddimus•3/23/24, 3:04 AM

Let me ask the same question but in a broader sense…. Coming from a Honeycomb Alpha yoke, if you could choose the best all-around grip, what would it be? Primarily for MSFS but I could see delving into the DCS world. Want to learn helis and of course still fly GA.

Ice•3/23/24, 5:08 AM

I'm ~80 Rhino's away from salvation. I didn't select any adapters when I did my pre-order form, can I change that when my order comes up?

amadeus•3/23/24, 8:24 AM

yeah

amadeus•3/23/24, 8:25 AM

you should be able to go through a separate form when your turn is up (if i remember correctly) and you can pick everything you need then

TToddimus Let me ask the same question but in a broader sense…. Coming from a Honeycomb Al...

PiNKSH!T•3/23/24, 9:10 AM

if you want just one grip I would either get; VKB MCGU, Virpil t-50cm2 or Constelation Alpha, Winwing F-16 + EX extension. VKB needs the VPforce passthrough adapter which imo is a good thing as you can still use the powerful vkb config software, Virpil is plug & play with the Rhino & WW needs an adapter but will then work with RHino base. Either one of those three grips will give you the most function, apart from a few aircraft like the Kiowa you'll be able to cover every single keybind on any hotas grip.