Hoping this helps a bit. My DIY Rhino setup on on a SimFab rig, with the base about as low as possib

Hoping this helps a bit. My DIY Rhino setup on on a SimFab rig, with the base about as low as possible on their metal mount plate. I can use the 16EX with no extension, but it is a bit too low. After some experimenting, I printed a 60mm extension, and that's about perfect with the height of the WW adapter as well. Happy to provide more details of measurements if you want.

MMGBDave Hoping this helps a bit. My DIY Rhino setup on on a SimFab rig, with the base ab...

Ice•3/29/24, 3:23 PM

That does help! Can you measure from the bottom of the rhino all the way to the top of the stick?

Ice•3/29/24, 3:24 PM

Actually wait, I’ve got it. I can just add the height of the rhino in lol

Ice•3/29/24, 3:24 PM

Cool. I’ve got what I need. Thanks to those who helped out!

Ice•3/29/24, 8:14 PM

Got my notification my Rhino is almost done. Can’t wait.

OZ67•3/30/24, 1:08 AM

I had to turn the rhino in opposite to get the thrustmaster stick closer Now it doesn't recognise button press, anything I may have missed? Cheers

OZ67•3/30/24, 1:21 AM

Fixed, I had to turn around the little plug on the stick.

mattback•3/30/24, 3:35 AM

that looks so cool

OZ67•3/30/24, 3:35 AM

in vp configurator which grip type is recommended for a thrustmaster ? currently using generic.

OZ67•3/30/24, 7:17 AM

Do you have to use both the configurator and TelemFFB together or 1 or the other?

Asdforce•3/30/24, 8:41 AM

Yup, thrustmasters use the generic grip profile.

Asdforce•3/30/24, 8:45 AM

Telemffb is optional if you want extra effects such as engine vibrations, deceleration forces pulling the stick forward, gun vibrations etc. Configurator is for configuring the "global" settings for the Rhino base and, should one need it, creating per-aircraft profiles (different stick movement ranges, Rhino-based force trim etc.)

Andre•3/30/24, 3:56 PM

are there any sticks that are typically recommended to go with the rhino base?

Fierce_Fire•3/30/24, 3:58 PM

Virpil is inherently compatible so if you're fine with their offerings id go for that (or any other virpil compatible stick)

Fierce_Fire•3/30/24, 3:59 PM

Winwing is another easy option, only requiring the adapter, while vkb needs both adapter and one of their black boxes. Benefit for vkb is that you retain their software to program the stick rather than utilizing walmis' application

Andre•3/30/24, 4:10 PM

gotcha. Is thrustmaster compatible as well?

AndyHill•3/30/24, 4:29 PM

yes

AAndyHill yes

blave549•3/30/24, 5:14 PM

The TM grips are my favorites. I've had Virpil ones; the TM's buttons/hats feel a lot more "positive" -- more like what's on a real grip (I have one).

Fr4Ged•3/30/24, 5:20 PM

I have the TM F-16 add-on grip and the Virpil Constellation Alpha. Using the 200mm extension by Virpil. I prefer the Virpil.

Sunshine•3/30/24, 10:30 PM

The WinWing grips, do they interface well?

SSunshine The WinWing grips, do they interface well?

mechsicko•3/30/24, 10:40 PM

They need an adapter that adds like 50mm? To the height of the stem but work just fine

SSunshine The WinWing grips, do they interface well?

TrigaNZ•3/30/24, 10:51 PM

My F-16EX is excellent, I love it.

Mmechsicko They need an adapter that adds like 50mm? To the height of the stem but work jus...

Sunshine•3/30/24, 10:51 PM

So electrically they are compatible with TM?

Sunshine•3/30/24, 10:51 PM

Cool

WhereNoLarkFlew•3/30/24, 11:36 PM

Quick question about the Rhino - has Walmis suggested he’d build a version with higher peak force? Some competitors are getting up to 35 Nm of peak force which seems a fair bit higher than what’s on offer with Rhino.

Fr4Ged•3/30/24, 11:41 PM

mine already wants to rip itself out of my hand in certain situations lol

SSunshine So electrically they are compatible with TM?

mechsicko•3/31/24, 2:12 AM

Thankfully yes but for some reason winning use a 6pin miniDIN instead of 5

FFr4Ged mine already wants to rip itself out of my hand in certain situations lol

WhereNoLarkFlew•3/31/24, 11:22 AM

Man, I wish I could test it all out. Rhino seems like it’s quite polished for such a small operation. I’m worried about the motors getting too hot under decent load. If there are other motors that produce 5x peak torque I’d think that’d make them run cooler and provide more longevity.

WWhereNoLarkFlew Man, I wish I could test it all out. Rhino seems like it’s quite polished for su...

Antares•3/31/24, 12:07 PM

The Rhino has fans which kicks in when it starts getting hot. For me they rarely turn on for normal use, only when pushing hard for long time do the fans enable at all. So I think temperature is well under control with the Rhino

Boggy•3/31/24, 12:29 PM

I'm too dumb/lazy to figure this out but if I limit the throw of the Rhino to 70% in each axis with a 15 cm extension. What % would that equate to if you changed it to a 10 cm extension?

WhereNoLarkFlew•3/31/24, 4:37 PM

Awesome, thanks for the info

BBoggy I'm too dumb/lazy to figure this out but if I limit the throw of the Rhino to 70...

Sunshine•3/31/24, 5:51 PM

What's the limits? I can see in CAD

Sunshine•3/31/24, 5:51 PM

20 degrees?

Boggy•3/31/24, 6:03 PM

22° I think?

Boggy•3/31/24, 6:05 PM

But with my 70% imposed limit it comes to 15.4°

Toddimus•3/31/24, 6:13 PM

To solve the geometry, you need to know what the length is from the gimbal pivot to the extension. I don’t have a Rhino, so I don’t know what that number is. If you measure from the center of the pivot to the top of the stub or to the top of a known extension length, I can figure it out pretty quickly with a CAD sketch.

WWhereNoLarkFlew Man, I wish I could test it all out. Rhino seems like it’s quite polished for su...

Red Magic•3/31/24, 8:47 PM

Yeah that's why I'm surprised the other guy got his to work (and doesn't have heat issues) while having a much higher torque

Blind•3/31/24, 9:38 PM

If you're usually not running anywhere near full force, then I would expect the heat build up to be lower.

Fierce_Fire•3/31/24, 10:07 PM

havent seen my motors go above 40c yes

Fierce_Fire•3/31/24, 10:07 PM

blf04 not exceeding 20A often

Fr4Ged•3/31/24, 10:08 PM

yeah, I am at like 34°C

Red Magic•3/31/24, 11:18 PM

So could one just increase the power of the motors then? If the temps are already so low

Fierce_Fire•3/31/24, 11:22 PM

I dont have much electrical knowhow so take this with a grain of salt, but I don't think the temps are the motors limiting factor

Number481•4/1/24, 2:14 AM

TelemFFB Release

I've again tried to @ the people who I've discussed various items with.

It's another wall of text, but there's something here for just about everyone, regardless of the sim you primary use.

As always, you can grab the latest from #VPforce-TelemFFB , or let your current version automatically update.

System:

"Run Anything"
- @Jaeger
  - New command runnercommand runner feature that will allow you to kick off any shell command when an aircraft loads (or SIM or Aircraft Category).
  - To configure, just enable the setting and enter the command as you would from the windows command prompt.
  - Want to launch the Danger Zone video on youtube every time you load into the F-14? Now you can!
- No.. seriously (start https://youtu.be/siwpn14IE7Estart https://youtu.be/siwpn14IE7E)
  MSFS:
Dynamic SimConnect Subscriptions
- @MGBDave @bert @MichalK @smitty
  - Some 3rd party aircraft use alternate "L:Vars" for certain pieces of data that various effects use. This renders the applicable effects either inoperable or inaccurate.
  - This new functionality allows us to dynamically replace a given piece of telemetry with the L:var that is needed to retrieve the applicable data from a given aircraft.
  - The only known aircraft today are the A2A Comanche (autopilot and prop thrust) and the B206/B47 from FlyInside (engine and rotor RPMs). The simconnect re-subscriptions for these aircraft are baked into this release, however this new feature will allow us to accommodate more aircraft in the future without the need to modify the underlying effects code.
[HPG Helicopters] - Trim Release Damper for the Collective Axis
- Similar to the Cyclic trim release damper setting that was in the previous release, this adds the same concept for the HPG collective axis when the TR button is depressed.
  DCS:
New, more accurate Airspeed Telemetry
- @bert @FatalBert
  - It was recently discovered that both the 'TAS' and 'IAS' data that comes directly from the sim is inaccurate in several ways. The 'TAS' data seems to be more in line with ground speed. Th "IAS" data, while more accurate, seems to include a fixed value, regardless of heading, that is somewhere around 2x the current wind speed.
- Given the above inaccuracies, with most effects leveraging the 'TAS' data, you may have noticed odd behavior of effects like ETL.
- In this version, we are calculating the "true" TAS by using the aircraft velocity vectors and the wind vectors to determine the aircraft's actual speed through the air mass. This has given us a much more accurate data set than was previously available from the sim.
Helicopter Trim Release Damper
- @Reed @Virus
  - This is not a replacement of the in-game trim release functionality. It is a simple spring based dampening effect, identical to the one for MSFS.
  - To configure, simply enable the effect and bind the same button that you have configured for TR in the sim.
- While the button is depressed, TelemFFB will add the dampening effect and will remove it when the button is released. The actual trimming and centering offset is still completely handled by DCS.
  IL-2:
Improved effects handling when game window loses focus
- @Broadway
  - IL-2 does some strange things, including a "kill all" when the window loses focus. This update improves on the TelemFFB handling of this scenario

TToddimus To solve the geometry, you need to know what the length is from the gimbal pivot...

Boggy•4/1/24, 6:44 AM

Good point , I'll make a quick sketch and figure it out

MichalK•4/1/24, 7:41 AM

Great stuff @Number481 , I'll check it out.

WWhereNoLarkFlew Quick question about the Rhino - has Walmis suggested he’d build a version with ...

Booker•4/1/24, 7:51 AM

What competitors do you mean? I’m new to this and all I’m aware of is BRunner.

Booker•4/1/24, 7:52 AM

Is anyone aware of a comparison between the VPForce and the BRunner? It’s difficult to decide which one to get.

BBooker What competitors do you mean? I’m new to this and all I’m aware of is BRunner.

Virus•4/1/24, 12:27 PM

ffbbeast, and there is also gvl and laserwing

BBooker Is anyone aware of a comparison between the VPForce and the BRunner? It’s diffic...

Jon (Bounty_V)•4/1/24, 1:01 PM

I don't have direct link to one but from what I've heard Rhino is better in every way except the long wait time.

Basically - if you don't want to wait and have the money, go with Brunner. If you don't mind waiting and want a superior product, go with Rhino

Glaive(Rikk)•4/1/24, 2:29 PM

In DCS do you fly heli's on the stick, then press the trim button once stable, or do you hold the trim button then release once stable?

Hoping this helps a bit. My DIY Rhino setup on on a SimFab rig, with the base about as low as possib

TelemFFB Release

System:

MSFS:

DCS:

IL-2:

Similar Threads

Similar Threads

TelemFFB Release

System:

MSFS:

DCS:

IL-2:

Similar Threads