Hi, sounds like the mini PCB in the adapter could be damaged - not sure if electrical or mechanical.
Hi, sounds like the mini PCB in the adapter could be damaged - not sure if electrical or mechanical. I can mail you a new one.
WHi, what do you mean by "configured" ?
Win fact are the motors ready for the configuration of the ffb joystick or should it be done once the rhino is completely built?
WWell yeah, you need to build the Rhino to calibrate the axis ranges and so on
WBut it's mostly plug and play
Wok ok, I ordered the DIY kit last week, so once it arrives I will be able to finish assembling the rhino and move on to the calibration stage, looking forward to that happening
Thank you Walmis
Thank you Walmis
Vok, thanks....let me know how to arrange it
Dmy ac adapter connector is kinda loose and sometimes it dissconects during playing from vibration, here is how it looks fully connected
D
DAny fix for that?
PCan someone point me to the directions on how to set individual configurations for different aircraft? Somehow I’ve missed that I’m thinking that it must be possible. Thanks in advance!
Fyou need to use the WIP build of TelemFFB to be able to change individual configurations
BTrying to update TelemFFB, getting the Defender "threat found" again. <sigh.>
Nwe've done everything we can to try to avoid it, including writing a custom bootloader for pyinstaller, but its still a crapshoot.
There will be another build shortly that fixes a couple minor things that will probably be fine.
There will be another build shortly that fixes a couple minor things that will probably be fine.
BOK I'll wait for the next build rather than beat my head against the screen. I can't remember what I did last time to get around it. Thanks!
Nhttps://discord.com/channels/965234441511383080/1093558100713279508/1224414368406700072 No complaints from my system on the new build 
BConfirmed, NAV (Not A Virus) mode enabled 
Aso supposedly I have all the spring settings activated on my stick but for some reason it is not auto-centering. am I missing something?
N
Ahaha thanks!
KGuys, quick question. I got TM Hornet stick, but "CMS press", button 19 is not registering in VP app and in windows game controllers. I don't have TM base to check, is that normal with Rhino base or do I need to change some settings?
MHi, just setting up my Rhino for the Helo pit, how easy is it to rotate the 5 pin connector so I can turn the base around ( cut off etc to the front) otherwise my stick is backwards....
WIt's easy, just undo those two screws and rotate the socket. The cable inside might not let it lift up, so you might need to open the leather cover to feed in the cable a bit.
WOther buttons work fine?
KYes, rest is fine. I've played with grip selection settings but no joy.
WNo clue, sounds like it could be a wiring issue/fault in the grip itself for that particular input.
It should just work.
It should just work.
KI know this from TM manual but I'm not sure if it's the same case with Rhino
WAh
Wcould enable the "debug" grip and check if any data changes in the Debug tab window when you depress that button?
KWill do
KNothing
MOK, figured itt out....
MI had to unclip the connector to lift the plate out enough to rotate it.....
WYou need to push the cable into the tube
MJust worked that out, cheers walmis...
KCopy, thanks for help. I will try to replace it.
DAny tips for my question for ac adapter disconnecting easily. Am I the only one with this issue as there is no one saying anything. Usb adapter is not loose but ac adapter is kinda loose I tied wire down below around my mount so usually it is nit dissconnected but it happened now in last few weeks 2-3 times that during usage wire dissconnects from vibrations I guess. Very frustrating spec when I was playing in VR and just all of a sudden stick goes limp.
WCan you make a short vid demonstrating how loose it is?
MIs there a way to offset the grip slightly ( twist it slightly to the left to allow for me mounting it centrally and using my right hand ) In my other simpit, I was using an extension and could turn it using that. In this pit, I am not using an extension. I cant angle the base either due to using the mounting plate which sits at a right angle on a cross member.
Fdepends on the grip I guess.
you can fasten the Virpil Constellation Alpha however you want to
you can fasten the Virpil Constellation Alpha however you want to
DDHere is is
Fisnt that not in all the way?
Fmy cable isn't that much different. my plug goes in 3/4 of they way but it does not wiggle that much.
I did not force wiggle it like you did though.
I did not force wiggle it like you did though.
Dit is all the way in
Fexactly
Fyour connector looks to be worn out a bit though.
did you pull the cord or something?
did you pull the cord or something?
Dthere is around 3 mm more but I cant put it in more and it just slides out easily and wiggles like that from day 1, thought that is weird from the start but started bothering me now once it dissconect during play even tough I secured the wire so it dosen't get pulled
Dif it looks worn its only looks like that in vid it is pristine
Dwhere does connector looks worn?