Hey, that's interesting.. Can you select the "debug" grip and post a screenshot from the debug tab o

Hey, that's interesting.. Can you select the "debug" grip and post a screenshot from the debug tab output?
You have only the Virpil Alpha to test?

Wwalmis Hey, that's interesting.. Can you select the "debug" grip and post a screenshot ...

Mistic•4/10/24, 2:41 PM

Sounds good I’ll do that quick

Mistic•4/10/24, 2:49 PM

walmisOP•4/10/24, 3:12 PM

It's the same if you unplug the grip?

Mistic•4/10/24, 3:17 PM

Mistic•4/10/24, 3:17 PM

this is once unplugged

Mistic•4/10/24, 3:17 PM

switches to the F

MMistic Click to see attachment

walmisOP•4/10/24, 5:06 PM

Thanks, I'll try to reproduce this tomorrow and come up with a fix

LLv34_Vellu•4/10/24, 5:12 PM

I have a problem with DCS. Although a Rhino's stict is stable a plane's stick move to Y-axis way. In the VP Conficugurator everything are stable when the stick is also stable. In the DCS this happened all planes but with CloD every thing works fine.

walmisOP•4/10/24, 5:12 PM

It's possible you have multiple axis bound in DCS

Stryker990•4/10/24, 5:22 PM

do i need a spacer for the winwing adapter with F-16EX grip?

Wwalmis It's possible you have multiple axis bound in DCS

LLv34_Vellu•4/10/24, 5:42 PM

Thank's for your advice. I update my DIY Rhino and all at once I update also my cockpit. There are one multiple axis bound which cause the problem. I didn't note it.

peteg•4/10/24, 9:26 PM

Anyone know how to fix it when the telem app isn’t picking up the loaded sim? It was working well in xplane yesterday, but when I tried it this morning it just said “waiting for data”.

peteg•4/10/24, 9:28 PM

Ppeteg Anyone know how to fix it when the telem app isn’t picking up the loaded sim? It...

Kowalsky•4/11/24, 10:01 AM

You need to be siting in the plane, not in DCS menu. If that's not working, you need to check: "My Games\DCS\Scripts\Export.lua" if it has line added for telemffb

Bob Bushman•4/11/24, 10:24 AM

Xplane problem, not dcs.

Ppeteg Anyone know how to fix it when the telem app isn’t picking up the loaded sim? It...

Number481•4/11/24, 11:29 AM

There’s nothing very dynamic about the plug-in for xplane. Either it should work or not. Unless there was an xplane update that broke something, there’s nothing that could change from run to run that would affect it.

You can check the loaded plugins in xplane from the menu after startup. If you see the TelemFFB plugin listed, it should be working.

Wwalmis It's possible you have multiple axis bound in DCS

Reed•4/11/24, 7:01 PM

This check other hats and vr controllers and other peripherals with hats. This happened to me.

Wwalmis Thanks, I'll try to reproduce this tomorrow and come up with a fix

Mistic•4/12/24, 10:24 AM

We’re you able to recreate the issue?

MMistic We’re you able to recreate the issue?

walmisOP•4/12/24, 12:38 PM

Yeah, I get the same behavior if I disconnect the +5V wire going to the grip. So it's either the mini DIN connector or the inside wire that's not making contact with the 5V power.
Not exactly sure why it worked during testing and not working now. But If you're able to inspect the connector it might be a quick fix. Otherwise I'll need to send you a replacement.

Littlesack•4/12/24, 12:39 PM

When using the hardware trim option, do we need the same binds set in dcs or does the configurator software override them?

LLittlesack When using the hardware trim option, do we need the same binds set in dcs or doe...

walmisOP•4/12/24, 12:39 PM

You don't need to enable hardware trim if the sim supports it natively. It might cause interference.

Littlesack•4/12/24, 12:40 PM

Ah ok

Wwalmis Yeah, I get the same behavior if I disconnect the +5V wire going to the grip. So...

wolfman59#6013•4/12/24, 1:49 PM

Hello Walmis,
how much do you sell this type of connector, and is it for a thrusmaster stick? because I am interested in finalizing my vpforce rhino

Littlesack•4/12/24, 3:53 PM

is there a compilation of settings per aircraft that people have put together anywhere

LLittlesack is there a compilation of settings per aircraft that people have put together an...

Fr4Ged•4/12/24, 4:03 PM

📙knowledge-baseRhino Profile Sharing

Littlesack•4/12/24, 5:06 PM

thanks, not sure why I couldn't find that channel

Spit400•4/12/24, 6:56 PM

Hello, all. Thinking of jumping in and trying to build my own.
Someone has offered me these motors. I have never seen them before. Does anyone have experience with them. They seem awfully small next to the Odrive board.

Spit400•4/12/24, 6:58 PM

Secondly, where are the step by step instructions for this build? I have been poking around but haven't found a thread for directions. Could someone point me in the right direction for directions? Cheers.

smitty•4/12/24, 7:02 PM

any directions youd find here are for vpforce motors, not those

Spit400•4/12/24, 7:14 PM

The motors aren't agnostic? I read somewhere that electric scooter motors might be used, no?

smitty•4/12/24, 7:16 PM

nope, there is a custom board on the end of the motors that talks to the usb board

SSpit400 The motors aren't agnostic? I read somewhere that electric scooter motors might ...

Fierce_Fire•4/12/24, 7:34 PM

You might be confusing the rhino with FFBeast

Fierce_Fire•4/12/24, 7:34 PM

I believe they also have a diy kit but I'm not sure, they do use scooter or hoverboard motors

Wwalmis Yeah, I get the same behavior if I disconnect the +5V wire going to the grip. So...

Mistic•4/12/24, 7:56 PM

Sounds good I’ll let you know here shortly

FFierce_Fire You might be confusing the rhino with FFBeast

Spit400•4/12/24, 9:48 PM

I think you may be correct, Fierce Fire. Maybe Lazer Wing? I double check. Thanks all for your feedback.

SSpit400 I think you may be correct, Fierce Fire. Maybe Lazer Wing? I double check. Thank...

BAKE•4/12/24, 10:24 PM

I think your looking for OpenFFBoard discord.

Wwolfman59#6013 Hello Walmis, how much do you sell this type of connector, and is it for a thrus...

Tinman•4/12/24, 10:50 PM

https://www.cuidevices.com/product/interconnect/connectors/din-connectors/md-50pl100

MD-50PL100 | DIN Connectors | Connectors

5 Pin, Mini DIN Receptacle, Panel Mount 10 cm Leads

WeaselGX•4/13/24, 4:19 AM

I am running into a strange issue where the Rhino is connected but the VPforce FFB Configurator is not picking it up. The device shows up on the WebUSB Tool and in Game Controllers but it does not register with the Configurator. Everything runs fine in game but I can't configure anything. It was working previously albeit I haven't used the configurator in a while

WeaselGX•4/13/24, 4:19 AM

I have tried running with Administrator mode and have restarted and unplugged everything but I get the same result

Swoop•4/13/24, 10:34 AM

Does anyone happen to have the thrustmaster warthog mini din pin out?

I/JG7_Moto•4/13/24, 1:04 PM

DCS warbirds, aileron resistamce feels a lot more than elevator resistamce, what setting will help make them have equal resistance?

I/JG7_Moto•4/13/24, 1:06 PM

I/JG7_Moto•4/13/24, 1:06 PM

Or increase just elevator resistance

SSwoop Does anyone happen to have the thrustmaster warthog mini din pin out?

TheAmazinGreat•4/13/24, 2:38 PM

WWeaselGX I am running into a strange issue where the Rhino is connected but the VPforce F...

WeaselGX•4/14/24, 12:22 PM

I figured it out after some trial and error. The USB ID is somehow stuck on 2050 even though the default in hardware is 2055. Once I was able to plug to another computer and change the joystick USB device ID to 2050, I was able to connect to the machine in question above. I am not sure why the software is stuck to 2050 on that PC. @walmis

TTheAmazinGreat Click to see attachment

recoilfx•4/14/24, 12:23 PM

On an unrelated note, It warms my heart that after a decade people are still using this. I created this diagram when I first started modding and here we are, building a FFB stick.

Bob Bushman•4/14/24, 12:25 PM

Think it has less to do with us, than that thrustmaster haven't changed it

AAndre I have a Virpil Blackhawk Grip attached to my DIY Collective and connected to th...

J2_NobiWan•4/14/24, 5:46 PM

@walmis I see the same symptoms with my Virpil Blackhawk Grip. Has this been solved? Thanks!

SSpit400 I think you may be correct, Fierce Fire. Maybe Lazer Wing? I double check. Thank...

PiNKSH!T•4/15/24, 5:23 AM

from what I have seen, firstly of course VPforce Rhino is the best as far as software, support & community etc. but if you are going diy with non vpforce motors then I would suggest FFbeast not laserwing, can't say about current laserwing but from what I saw of it last & what I have recently seen of FFBeast I would suggest it over laserwing, it seems to have decent software & support growing. Though a vpforce motor/electronics kit would be my top suggestion.

PPiNKSH!T from what I have seen, firstly of course VPforce Rhino is the best as far as sof...

ddrake1984•4/15/24, 6:02 AM

https://tenor.com/view/agreed-yes-nodding-golden-girls-confirmed-gif-19805811

Tenor

Hey, that's interesting.. Can you select the "debug" grip and post a screenshot from the debug tab o

Similar Threads