Think this is recent, I'm also surprised. Will be picking up one soon as I've already cut some "extr
Think this is recent, I'm also surprised. Will be picking up one soon as I've already cut some "extra" threads on mine when I connected Virpil grip 
CYes, I‘d be interested as well.
V:package: 
RHINO #0494 Has Shipped!
RHINO #0494 Has Shipped!
SYeah will likely order one if i ever break/wearout the 3D printed one mounted by default
PI’m Interested too
Sthanks for the info, I'm interested in that too. probably will wait a little till I can consolidate it with another order.
THonestly if you don’t want to DIY just jump in the list and pay Walmis!
It’s for sure he’s the one who’s built the most and even though it may be some huge number of units ahead of you.. Not everyone buys when the number is called so there are a lot of folks who drop out and that allows you to move on up.
I’d say just jump on the list because it’s no pressure to buy until they call your number.
So yeah I’d just be patient.
AFTER you added the cost of 3D printing and the other “extra’s”.. the DIY still cost about 65% of the original anyway.
It’s not that much cheaper but cheaper enough if you did it yourself.
If you built it for sale… you’d only break even same as walmis.
I don’t actually see him getting rich off this he’s doing the community it’s a solid imho
It’s for sure he’s the one who’s built the most and even though it may be some huge number of units ahead of you.. Not everyone buys when the number is called so there are a lot of folks who drop out and that allows you to move on up.
I’d say just jump on the list because it’s no pressure to buy until they call your number.
So yeah I’d just be patient.
AFTER you added the cost of 3D printing and the other “extra’s”.. the DIY still cost about 65% of the original anyway.
It’s not that much cheaper but cheaper enough if you did it yourself.
If you built it for sale… you’d only break even same as walmis.
I don’t actually see him getting rich off this he’s doing the community it’s a solid imho
TBrand new pre built.. 800euro from walmis (plus ship)
DIY is 300 for the kit (plus ship). 50-75 for the extra parts like bolts, nuts, washer, etc. So near 400 just in parts (or about 50% so far)
Now calculate the amount of spool and run time for the prints.
IF you only buy spool (and run your printers free off like solar or some stuff).. okay add that cost.
Now pay yourself $1 for assembly, set up, head aches, etc..
And it’s easily 60%-70% of the cost of just buying it brand new.
The advantage (to me personally) is that when you DIY you get this feeling of accomplishment that can’t be replaced or replicated.
Yes I was a pilot irl but now my real job is Dad.
Showing my kids some cool thing I bought isn’t nearly as cool as saying hey guys look at what Daddy BUILT
.
I want them to be inspired to look inside things, to build things for themselves in the future..
So for me I actually LOVE the kit, even more so than the wonderful builds you guys post.
Not because of what it is… but for what it offers (and the ways it can inspire the next generation of builders).
DIY is 300 for the kit (plus ship). 50-75 for the extra parts like bolts, nuts, washer, etc. So near 400 just in parts (or about 50% so far)
Now calculate the amount of spool and run time for the prints.
IF you only buy spool (and run your printers free off like solar or some stuff).. okay add that cost.
Now pay yourself $1 for assembly, set up, head aches, etc..
And it’s easily 60%-70% of the cost of just buying it brand new.
The advantage (to me personally) is that when you DIY you get this feeling of accomplishment that can’t be replaced or replicated.
Yes I was a pilot irl but now my real job is Dad.
Showing my kids some cool thing I bought isn’t nearly as cool as saying hey guys look at what Daddy BUILT
.I want them to be inspired to look inside things, to build things for themselves in the future..
So for me I actually LOVE the kit, even more so than the wonderful builds you guys post.
Not because of what it is… but for what it offers (and the ways it can inspire the next generation of builders).
Fif you 3d print the casing you might as well have to consider energy costs as well 
VHi, have you found a good mounting solution for GT1 EVO?
MI just finished a DIY, and you are 100% correct. I didn't shop for the cheapest BOM items (Amazon for ease and fast shipping), but all in with filament (2+ 1kg rolls), an adequate laptop AC adapter, etc, I saved maybe $200 (not counting labor) at best, and many months of wait time. I already have a couple 3d printers, so I didn't have that cost to worry about.
I am still on the wait list (added myself earlier this month), and will most likely get an officially built unit when my time comes. The tech is so amazing that having a spare is worth it to me. I might even print a second set of parts for a friend since I have nearly 80% of the BOM (screws, nuts, bearings) leftover from my orders.
I am still on the wait list (added myself earlier this month), and will most likely get an officially built unit when my time comes. The tech is so amazing that having a spare is worth it to me. I might even print a second set of parts for a friend since I have nearly 80% of the BOM (screws, nuts, bearings) leftover from my orders.
TThat’s really great man.
Quick question.. Can I, errr, be your friend?
I’m about to buy a 3D printer for this project specifically which is a rabbit hole of its own hahahaha
Anyway it’s the labor of love I guess right?
Quick question.. Can I, errr, be your friend?
I’m about to buy a 3D printer for this project specifically which is a rabbit hole of its own hahahaha
Anyway it’s the labor of love I guess right?
FFYI if you don't want any hassle and just want it to print, buy a Bambu printer
FHad a p1s for like 2/3 months now and it's been close to flawless, only times it fd up is when I designed/setup something very wrong
MI have the Bambu X1C after owning/modding Creality printers for years. Bambu's are literally up and running in 30 minutes after unboxing, and that includes firmware updates and auto calibrations. On top of that they are blazingly fast compared to bed slingers
You don't have to climb the steep learning curve of printer tuning/tweaking to get good/perfect results with Bambu. As close to a home appliance as you can get. I have weeks/months and several hundred dollars invested in upgrading an Ender 5 Pro and CR-10 to get the print quality I wanted. It was worth it as a hobbyist, and I learned a lot along the way. After getting the X1, they both collect dust unless I need to print something larger than the X1s build volume on the CR-10.
You don't have to climb the steep learning curve of printer tuning/tweaking to get good/perfect results with Bambu. As close to a home appliance as you can get. I have weeks/months and several hundred dollars invested in upgrading an Ender 5 Pro and CR-10 to get the print quality I wanted. It was worth it as a hobbyist, and I learned a lot along the way. After getting the X1, they both collect dust unless I need to print something larger than the X1s build volume on the CR-10.
TYou’re the second person who suggested the X1 so I may have to look into it.. I was told it’s pricey so be ready but yeah I would prefer the buy once cry once over the endless tinkering and upgrading of the low and mid tier models.
FTbh if you dont need to print special materials like carbon fibre reinforced filament you can get by with a p1s which is close to half the cost
Fand if you dont really care about printing specific/very high performance parts the a1 might even be sufficient
Falso from what i found carbon fibre filament is not as strong as many believe as the fibres seem to interfere with the base material
MYou can get a hardened steel nozzle for the P1, and a set of hardened steel extruder gears for @$50 US.
I tried PLA-CF initially for my DIY Rhino, and regular PLA was much stronger with better layer adhesion (I assume because the plastic is not diluted by micro fibers). CF does result in an amazingly smooth surface finish cosmetically
I tried PLA-CF initially for my DIY Rhino, and regular PLA was much stronger with better layer adhesion (I assume because the plastic is not diluted by micro fibers). CF does result in an amazingly smooth surface finish cosmetically
Fyeah, this is why im happy i didnt go for x1c
Fit seems CF is weaker than normal funnily enough
Falso apparently colour matters a ton
MThe X1 has some nice upgrades out of the box you can't get on the P1. Most notably the touch screen and LIDAR (for dynamically adjusting filament flow). To be honest I rarely use the touch screen as you can do everything from the Bambu slicer software. The LIDAR is nice if you use a lot of different filament brands, but if you don't it is easy to setup profiles for the brand you use most. Speed and results are the same P1 to X1
SI believe it's mine 
And tommorow it's expected to arrive 
Just can't wait 
And tommorow it's expected to arrive Just can't wait 
MDid this today with P1 and CF this is the top surface amazingly smooth like brushed steel part is 6mm thick panel
JDo you have a 3d printer?
JThe X1C is a fantastic printer. The P1 series are also amazing.
V:package: 
RHINO #0495 Has Shipped!
RHINO #0495 Has Shipped!
FI still have to tune it or dry my filament but pla and ironing gives an insanely flat surface
V:package: 
RHINO #0496 Has Shipped!
RHINO #0496 Has Shipped!V:package: RHINO #0497 Has Shipped!
RHINO #0497 Has Shipped!JYou know I've never actually tried "Ironing". I've seen it and just kept forgetting to research it!
SWhat ur not ironing your clothes? Heresy
J
Digital Combat Simulator | DCS World | Combat Simulator
The Boeing CH-47F Chinook fondly referred to as 'The Hook' by US military personnel, stands today as the premier multi-mission rotary wing aircraft in use with the US Army, US Army Reserve, National Guard and 20 other nations including Canada, the United Kingdom, Netherlands, Japan, Italy, Greece, Spain, South Korea, Australia, Türkiye, India an...
JComes out June 26th
PI want the typhoon
D@Jon (Bounty_V) my God man! The chinook mod in DCS is the most unique helo you will fly ... Now it's a full fidelity module!!!??? I think I just pulled the trigger on the TPR ffb pedal mod.
JAlongside the C-130 the Hook has been my most anticipated module
Yeah I need to get some MFG Crosswinds and that mod myself. I'm just terrible at DIY and want some sort of drill template or something so I literally can't mess up
Yeah I need to get some MFG Crosswinds and that mod myself. I'm just terrible at DIY and want some sort of drill template or something so I literally can't mess up
Fwhat will FFB pedals even do in a helicopter?
I understand them for warbirds but why for helicopters?
I understand them for warbirds but why for helicopters?
Jif u dont wanna take the spring off, will keep pedals in place for you
Jso you arent constantly holding them at a certain point or setting up some sort of trim
Jits also a feel thing
Fah, okay. I have a damper for the MFGs that hold them in place for me.
Jthis would do the same thing and then you're future proofed for any potential ffb effects made for pedals
FI'd have to find a way to fixate the pedals first then
VCan someone break down how telemFFB talks to the VPforce motors? Is it possible to have telemFFB generate FFB effects based on game telemetry and send them to a DirextX FFB device such as the Open FFboard?
VI suppose that information is classified 
is there a chance that telemFFB will support other motor-drivers in the future?
is there a chance that telemFFB will support other motor-drivers in the future?
NIts open source, no secrets. This is the custom driver here: https://github.com/walmis/VPforce-TelemFFB/blob/wip/ffb_rhino.py
From that file...
From that file...
C
