There are no guarantees about isolation between requests. Generally, the isolate is only reused by a

There are no guarantees about isolation between requests. Generally, the isolate is only reused by a single browser/client, so putting stuff in the global scope won't save you much

HHello, I’m Allie!There are no guarantees about isolation between requests. Generally, the isolate...

Paolo•5/7/24, 7:36 PM

Thank you. The issue is I'm trying to set up a session object in the Middleware, but so far attempts to do that and be able to recover it in the functions has proved... Not reliable?

Paolo•5/7/24, 7:38 PM

I tried adding fields to context but they do not seem to carry up the Middleware > Middleware > function tree

PPaolo I tried adding fields to context but they do not seem to carry up the Middleware...

Hello, I’m Allie!OP•5/7/24, 7:38 PM

Do you have a repro?

HHello, I’m Allie!Do you have a repro?

Paolo•5/7/24, 7:39 PM

See that's confusing because I thought I had it working and this morning it did not

HHello, I’m Allie!Do you have a repro?

Paolo•5/7/24, 7:40 PM

I'll get back on the laptop and post on worker-help? Should I tag you?

PPaolo I'll get back on the laptop and post on worker-help? Should I tag you?

Hello, I’m Allie!OP•5/7/24, 7:40 PM

Sure

HHello, I’m Allie!Sure

Paolo•5/7/24, 8:24 PM

thank you, it's up

Sufi dilmir qadri•5/9/24, 6:49 PM

howcan i block access to worker if its not access from my pages like anybody canquery it and get renderd html

SSufi dilmir qadri howcan i block access to worker if its not access from my pages like anybody can...

IEatBeans•5/9/24, 8:05 PM

You can use cloudflare access with a service token maybe

IIEatBeans I am using the mailchannels integration (via their rest api), and randomly (abou...

Tnix•5/10/24, 12:20 PM

Same thing happening to me and someone else I know

TTnix Same thing happening to me and someone else I know

IEatBeans•5/10/24, 3:45 PM

Good to know it’s not just me. Sounds like it’s time to switch to a different service

radi8#6722•5/10/24, 8:17 PM

I am said person and I'm personally going to just resend them until it works

hy.yu•5/17/24, 4:39 PM

Hi, is there any new progress in setting node_compat = true for functions?

Ian•5/21/24, 12:16 AM

I have a Pages project that I needed to upgrade to use Queues, but it turns out I can't add consumers in Pages? This is pretty disappointing. I figured I'd be able to make a new function that could be a consumer so I could keep all my code in one project.

Hhy.yu Hi, is there any new progress in setting node_compat = true for functions?

Ian•5/21/24, 12:19 AM

I've done it with

compatibility_flags = [ "nodejs_compat" ]
compatibility_date = "2024-04-04"

compatibility_flags = [ "nodejs_compat" ]
compatibility_date = "2024-04-04"

IIan I have a Pages project that I needed to upgrade to use Queues, but it turns out ...

Hello, I’m Allie!OP•5/21/24, 8:13 AM

Functions can only handle fetch events atm

HHello, I’m Allie!Functions can only handle fetch events atm

Ian•5/21/24, 8:18 AM

Too bad, I hope workers and functions get unified. I guess I’ll need to set up Lerna or Turborepo for now.

IIan Too bad, I hope workers and functions get unified. I guess I’ll need to set up L...

IEatBeans•5/21/24, 4:05 PM

Yea I really hope they do too. It’s annoying to have to have a separate worker just for random things like cron

IEatBeans•5/21/24, 6:48 PM

What would be the best way to run a task a few minutes after a function executes? I was thinking either a cron task (in workers) that runs every 5 minutes and checks for a list of scheduled tasks in the database, or a durable object with alarms?

IIEatBeans What would be the best way to run a task a few minutes after a function executes...

Hello, I’m Allie!OP•5/21/24, 7:41 PM

DO Alarm would be more scalable

Hello, I’m Allie!OP•5/21/24, 7:41 PM

And IMO easier to set up too

tmcltr•5/23/24, 4:45 AM

What's the best way to send mail from a Pages instance?

Ttmcltr What's the best way to send mail from a Pages instance?

Ian•5/23/24, 5:19 AM

Create a function which you can send a POST to that calls an email API like SendGrid to send the email for you. You need the function so that you can use secrets/api keys (passed in through environment variables) that should not be revealed in the frontend.

Ian•5/23/24, 5:22 AM

If this function is for something like a contact form that is exposed to the public (you don't have to log in to use it), then take extra precautions to prevent abuse. Add CSRF prevention and rate limiting.

Ian•5/23/24, 5:24 AM

Even though it's a single endpoint, you might want to consider using a microframework like Hono since it has built in middleware you can apply that does CORS, CSRF, and there's a 3rd party rate limiter middleware as well.

Martin 0x522E•5/23/24, 8:49 AM

Hey folks, how can it be that one of my functions (it's proxying a websocket request) sometimes produces exceptions which the log stream doesn't show? Like I would have expected the logs or the exceptions array to contain something...

IIan Even though it's a single endpoint, you might want to consider using a microfram...

tmcltr•5/23/24, 7:03 PM

I'll look into this! Thank you

Ttmcltr I'll look into this! Thank you

Ian•5/23/24, 8:05 PM

no problem. I've got quite a bit of experience with Hono in Page functions so feel free to ask me questions about it here.

MMartin 0x522E Hey folks, how can it be that one of my functions (it's proxying a websocket req...

Martin 0x522E•5/24/24, 12:49 PM

this is happening hundreds of times per hour, so that's really concerning...

Tricked•5/24/24, 1:30 PM

Isn't there like a request duration limit? Might be related?

jjjrmy•5/24/24, 2:02 PM

Is there any way to use "node_compat""node_compat" within the wrangler.toml?
I'm not getting the same compatability between Pages Functions and Workers.

Jjjjrmy Is there any way to use `"node_compat"` within the wrangler.toml? I'm not gettin...

Hello, I’m Allie!OP•5/24/24, 2:03 PM

Not on Pages, no

jjjrmy•5/24/24, 2:03 PM

so what can I do? I'm not able to use some libraries that I am able to use on Workers

Jjjjrmy so what can I do? I'm not able to use some libraries that I am able to use on Wo...

Hello, I’m Allie!OP•5/24/24, 2:04 PM

Put them in a Worker, then call it with a Service Binding?

jjjrmy•5/24/24, 2:04 PM

I guess ... but that seems going opposite of the whole Nuxt building for Pages setup

jjjrmy•5/24/24, 2:07 PM

this isn't a feature that can be supported by CF? Seems weird that Functions and Workers isn't 1:1

Isaac McFadyen•5/24/24, 2:31 PM

node_compatnode_compat (which is done with standard polyfills that increase the size of your Worker) is slowly being fazed out in favor of nodejs_compatnodejs_compat (which is built into the runtime)

Isaac McFadyen•5/24/24, 2:32 PM

I expect that's why there's no target of feature-parody there.

jjjrmy•5/24/24, 2:32 PM

the package I'm having issues with is KnexKnex

GGuidetoamerica.info fix your cloudflare docs zzzz

Ian•5/25/24, 7:05 AM

I know getting stuck is frustrating, but coming in hot and yelling about it doesn't make anyone want to help you. Outline the problem, what versions of Sveltekit you're using, explain CLEARLY what steps you took and what isn't working, etc. Also, Sveltekit has their own tutorial https://kit.svelte.dev/docs/adapter-cloudflare-workers

SvelteKit docs

Cloudflare Workers • SvelteKit documentation

IIan I know getting stuck is frustrating, but coming in hot and yelling about it does...

Hello, I’m Allie!OP•5/25/24, 7:06 AM

Note, you probably want https://kit.svelte.dev/docs/adapter-cloudflare instead

SvelteKit docs

Cloudflare Pages • SvelteKit documentation

tmcltr•5/25/24, 5:03 PM

This is perhaps too general of a question, but often when I look for docs and info about how to set up and use Pages Functions, I get docs for Workers intead. I know there's a lot of overlap, but it's not clear to me exactly how to adapt info about Workers to apply to Functions. Are there some general guidelines, or docs that discuss this?

Ttmcltr This is perhaps too general of a question, but often when I look for docs and in...

Hello, I’m Allie!OP•5/25/24, 5:05 PM

Clarifying Question: are you using any kind of framework for your project?

HHello, I’m Allie!Clarifying Question: are you using any kind of framework for your project?

tmcltr•5/25/24, 5:09 PM

Usually Hugo, but I have successfully set up and used functions in projects that don't use a framework, too. To be slightly more specific, I've managed to get my functions talking with Stripe checkout and Google scripts, but not Respond or Mimetext.

There are no guarantees about isolation between requests. Generally, the isolate is only reused by a

Similar Threads

Similar Threads

Similar Threads