No you don't. You can temporarily apply settings by pressing (just) Apply settings.

LLehmen Got my Rhino today. Had the honor of getting it directly from Walmis hands in hi...

This reminds me: @walmis your order form only mentions VKB Gunfighter MK III compatibility, but MK II also had Rev.B connectors and is thus compatible.

smitty•5/10/24, 2:51 PM

@walmis are you going to FSExpo? Great way to spread awareness.. you could probably sell enough rhinos to cover the cost https://flightsimexpo.com/

Home | FlightSimExpo 2024

FlightSimExpo is one of the world’s largest dedicated flight simulation conferences and tradeshows. The next event takes place June 21-23, 2024 at Rio Las Vegas.

FFr4Ged to be noted that you don't *have* to get physical throw limiters as you can do t...

krbs•5/10/24, 5:04 PM

How/where you can set up throw limiter in SW?

Kkrbs How/where you can set up throw limiter in SW?

Fierce_Fire•5/10/24, 5:15 PM

The configuration app has the option

Fierce_Fire•5/10/24, 5:16 PM

LLeLv30_Superbus No you don't. You can temporarily apply settings by pressing (just) Apply settin...

mac22443506•5/10/24, 5:46 PM

Ok got so u can test a change by hitting apply - and if u dont like it just restart the base and it resets to the saved settings?

Bob Bushman•5/10/24, 6:24 PM

Just clicking "load settings" loads the stored settings on the stick as well.

Vertigo (VIV)•5/10/24, 10:00 PM

About the cooling fan; its loud and seems pretty ineffective (takes a long time for temps to drop 1 degree, especially considering the amount of noise). Not a big deal when wearing headphones, but flying solo I prefer not to. I dont know how the Rhino looks on the inside, I havent opened mine yet, but there has to be room for improvement here? For starters, is it possible to have the fan on at a low rpm all the time? Secondly, maybe some cooling fins on the motor if there is any room for it?

VVertigo (VIV)About the cooling fan; its loud and seems pretty ineffective (takes a long time ...

Col. Sanders•5/10/24, 11:13 PM

What are you doing to get the fan to kick on? I never get mine to kick on.

Bob Bushman•5/10/24, 11:20 PM

From what I'd understood it would turn on at about 50c, and that is still far from when the motors start to overheat.

Unless 40c ambient room temp, but then I'd suggest an AC more than an improved fan.

AndyHill•5/10/24, 11:22 PM

if you have enough spring force the fans will kick in with a reasonable amount of maneuvering

CCol. Sanders What are you doing to get the fan to kick on? I never get mine to kick on.

Vertigo (VIV)•5/10/24, 11:49 PM

Turn the master gain knob to full and fly for 30 mins, and they will kick in, Do I need full power? Hmm.. maybe not, but I do like it, and my PC room is still cool (it wont be this summer).

BBob Bushman From what I'd understood it would turn on at about 50c, and that is still far fr...

Vertigo (VIV)•5/10/24, 11:53 PM

Yeah I think its 50C, and there is some hysteresis, I think it turns off at 47 or so. But even with no power being applied, that takes a pretty long time and there doesnt seem to be any fan speed control, its either on or off? That this is a safe temp; sure, probably, but that doesnt change anything really.

Bob Bushman•5/10/24, 11:58 PM

I could be wrong, but I think the temps in question are internal motor temps.
And with these motors the casings are also used as heatsinks, great big lumps of them, so I'd expect they take a while to warm up and at least as long if not longer to dissipate, at least during use.

VVertigo (VIV)Turn the master gain knob to full and fly for 30 mins, and they will kick in, D...

Col. Sanders•5/11/24, 12:00 AM

My settings must be a lot different. My master gain is 100 and I flying for hours and never had it go on.

AndyHill•5/11/24, 12:01 AM

it depends a lot on what you fly and how

Vertigo (VIV)•5/11/24, 12:02 AM

yeah, but the casing, and Im assuming its just the stock stepper motor casing, doesnt have much surface area compared to some finned coolers. Gluing on some ribbed cooler could increase the surface area many fold and make the fan much more effective, assuming there is any room.

CCol. Sanders My settings must be a lot different. My master gain is 100 and I flying for hour...

Vertigo (VIV)•5/11/24, 12:08 AM

FWIW, I had been flying the P51 in DCS doing touch and goes. I think the engine rumble is main culprit, always active. But I do like the engine rumble

VVertigo (VIV)FWIW, I had been flying the P51 in DCS doing touch and goes. I think the engine ...

Col. Sanders•5/11/24, 12:19 AM

That's probably it. I keep my engine rumble lower as I have a haptic seat that does most of that for me.

CCol. Sanders That's probably it. I keep my engine rumble lower as I have a haptic seat that d...

FleshAndWater•5/11/24, 1:55 AM

haptic seat...please speak more of this haptic seat......

Col. Sanders•5/11/24, 2:43 AM

I have a very basic Hf8. I play IL2 mostly, but it really adds to the overall experience. I use Simshaker wings program to adjust the seat

VVertigo (VIV)FWIW, I had been flying the P51 in DCS doing touch and goes. I think the engine ...

Boggy•5/11/24, 7:42 AM

Interesting, I'll try to reduce the rumble and see what happens

CCol. Sanders My settings must be a lot different. My master gain is 100 and I flying for hour...

GarrafaBr•5/11/24, 7:57 AM

Hi, I also have the fan turning on very often. Would you mind sharing a screenshot of your VP Force effects and settings screen? I would like to compare if my gains or my filter values the ones causing the overheat. I recently even ditched the extention to get more force. Thank you.

jonner•5/11/24, 10:10 AM

!status

Jjonner !status

VPforceBot•5/11/24, 10:10 AM

Hey @jonner,
So the last Shipped RHINO is #0525 on 2024-05-10
Average waiting time from preorder to shipped is 209 days, median is 215 days, max is 407 days
513 Rhinos are shipped in total

NNumber481 Sorry, I guess I’m out of ideas to try to help you. These are basic features of...

mac22443506•5/11/24, 1:53 PM

481 just in case your interested thought I would give u my feedback on using the rhino with the mh60 mod - basically managed to get the hardware trim working by applying the setting to the stick (can see force trim is working from the axis display ) but using it this way the helicopter takes in a nose down attitude (even trimmed fully back stick) - only way I can get it flyable (with force trim partly working) is disabling the hardware trim and assigning force trim binds in game (makes it flyable) - just my experience…..not sure if anyone else had a similar experiences?

nubbins•5/12/24, 7:13 AM

Any plan yet to update the VKB adapter to rev.C?

Nnubbins Any plan yet to update the VKB adapter to rev.C?

walmis•5/12/24, 7:13 AM

Already done

Wwalmis Already done

nubbins•5/12/24, 7:14 AM

beauty

now I wait patiently

Scarlet•5/12/24, 7:27 AM

How do people do their gooseneck extensions? Purchased product or DIY? If purchased, any good recommendations for vpc or winwing compatible ones?

TrigaNZ•5/12/24, 7:27 AM

Any Ideas then the update including the Virpil Blackhawk grip will drop?

Jon (Bounty_V)•5/12/24, 8:32 AM

I wish they made some cyclic grips as well

Scarlet•5/12/24, 8:34 AM

I think the VPC Mongoose is close to a lot of eurocopter cyclics. Other untility choppers have fairly generic cyclic grips

Wwalmis Already done

DarkestKnight 🇺🇸 | Ultimate•5/12/24, 8:41 AM

In laymen's terms, what do these adapters do? Is it possible to use Virpil sticks with the Rhino? Would I need an adapter like this? Does an adapter already exist?

Jon (Bounty_V)•5/12/24, 8:42 AM

faq

Jon (Bounty_V)•5/12/24, 8:43 AM

virpil works natively

tebinu•5/12/24, 9:22 AM

does anyone know of a compatible grip that is very generic both handed for general aviation?

DDarkestKnight 🇺🇸 | Ultimate In laymen's terms, what do these adapters do? Is it possible to use Virpil stick...

corbu1•5/12/24, 10:56 AM

You need adapters for winwing and VKB sticks. TM and Virpil work by default

JJon (Bounty_V)I wish they made some cyclic grips as well

corbu1•5/12/24, 10:57 AM

I was hoping for a AH-64 Virpil cyclic grip, but doesn‘t seem to happen

Ccorbu1 I was hoping for a AH-64 Virpil cyclic grip, but doesn‘t seem to happen

Piola•5/12/24, 12:34 PM

I think I'll try the MaxFlightSim collective, I'll let you know if and how it works

HrEple•5/12/24, 12:47 PM

https://virpil-controls.eu/vpc-mongoost-50cm2-grip.html

The Mongoose cm2 grip is an all round «does it all” grip for both helis and planes that natively fits the Rhino.

VPC MongoosT-50CM2 Grip

★ Cyrillic Button Labels
★ Based on Modern Russian Fighter Jet Controls
★ Material - Enhanced PU Plastic Construction
★ Wide Variety of Buttons, Triggers and Hats
★ Analogue Brake Lever

Due to the height of the grip, it is best suited for desk mounted/cockpit setups.

HrEple•5/12/24, 12:50 PM

Virpils extensions also work natively.

Piola•5/12/24, 1:01 PM

I know but I don’t like that plastic

Fierce_Fire•5/12/24, 1:06 PM

Why?

HHrEple https://virpil-controls.eu/vpc-mongoost-50cm2-grip.html The Mongoose cm2 grip i...

Fr4Ged•5/12/24, 1:17 PM

Has been out of stock permanently for months now though

HrEple•5/12/24, 1:17 PM

I can relate, but metal adds weight that eats force feedback and adds heat to the motors. All in all, I don’t really think about it while using it, and I came from a metal thrustmaster warthog grip

HrEple•5/12/24, 1:17 PM

I assume they’re updating the model then. Been out for a while - always always to improve the grips

HrEple•5/12/24, 1:18 PM

VK / Winwing also makes great stuff, I think.

Fierce_Fire•5/12/24, 1:23 PM

As a mcgu user, the only thing id change is move the body back to plastic tbh

Fierce_Fire•5/12/24, 1:23 PM

Reason i went with it was the other benefits it gave, but coming from the gladiator the mcgu feels cold in the hand

No you don't. You can temporarily apply settings by pressing (just) Apply settings.

Similar Threads

Similar Threads

Similar Threads