@Touch_Of_Legend if I get figured it out I will will post it here. I get all telemffb effects- even

@Touch_Of_Legend if I get figured it out I will will post it here. I get all telemffb effects- even the g-effects which can mimic the the spring force but it is not the same.

Hharry I tried to setup the edge and the extra300 mods in dcs. While not having any pro...

Number481•5/12/24, 11:53 AM

Those mods don't support FFB so you'll have to set up a configurator profile with 'sticky spring' enabled to get the spring to activate.

To my knowledge, there aren't any mods that do. I believe the FFB is part of the SDK which you don't get access to unless you are a contracted developer, or, no mod developer has ever taken the trouble to do it.

NNumber481 Those mods don't support FFB so you'll have to set up a configurator profile wit...

harryOP•5/12/24, 12:58 PM

Thank you, than I will try that. In the new OH-6A mod it works, but probably you or some else has set up the default profile with sticky spring. Have a nice weekend!

NNumber481 Those mods don't support FFB so you'll have to set up a configurator profile wit...

Touch_Of_Legend•5/12/24, 2:26 PM

Man I told you before I’m just gonna read all your replies one of these days….

To much stuff I missed for sure

Hharry @Touch_Of_Legend if I get figured it out I will will post it here. I get all tel...

Touch_Of_Legend•5/12/24, 2:28 PM

Yeah man if you make a profile that works please share it.

I’m probably in the minority here because both irl and in games I never wanted to fly a helicopter.

Just yeah was never my thing but the air racers..

Let’s do this

harryOP•5/12/24, 3:47 PM

@Touch_Of_Legend spring works now with the sticky spring, but rudder jumps around like crazy in both planes. It does work in all other planes... So I gave up for now.

Hharry @Touch_Of_Legend spring works now with the sticky spring, but rudder jumps aroun...

Number481•5/12/24, 3:48 PM

Do you have FFB pedals set up? What do you mean the rudder jumps around?

harryOP•5/12/24, 3:57 PM

NNumber481 Do you have FFB pedals set up? What do you mean the rudder jumps around?

harryOP•5/12/24, 3:58 PM

Yes ffb rudder. This happen if I give right rudder from neutral and release it after that.

Number481•5/12/24, 4:25 PM

Turn off the pedal trimming feature in TelemFFB if it’s enabled. I don’t know how or if that will work with mods like that.

Stryker990•5/12/24, 4:56 PM

~~okay now my rhino is dancing left and right in specifically in the DCS Mirage F1 anybody else got this? it didnt do this yesterday~~
problem solved: looks like i accidentally set telemFFB to simulate it as a helicopter :MurmKek:

Number481•5/12/24, 5:17 PM

@harry yeah.. turn off the trim option for the pedals. These mods don't accept input via the export script commands the same way the official modules do.

From the base "PropellerAircraft" profile, I would recommend modifying the G-force effect on the joystick and the pedal spring settings per the screenshots

harryOP•5/12/24, 5:46 PM

harryOP•5/12/24, 5:47 PM

Works good now. Thank you very much?!

harryOP•5/12/24, 6:09 PM

https://youtu.be/N0ZMR5eNeIw

YouTubesfx 100 motion

dcs extra 300 mod

harryOP•5/12/24, 6:12 PM

Unfortunately the flight model is not ready yet. They made the last update in 2021, so I have no hope, that it will be finished soon. I would love to train aerobatics with it....

I/JG7_Moto•5/12/24, 6:40 PM

Re installed IL2 and tried the Rhino, works good and I like the effects, but joystick feels slow like when there is no Telem in DCS, not very natural and slow to react which makes it difficult to be precise, it does get stiff at speed but when I slow down I can feel a sudden change in the stick were the resistance becomes weaker suddenly, no progressively like DSC, any ideas how to make it work better?

Hharry https://youtu.be/N0ZMR5eNeIw

Number481•5/12/24, 7:03 PM

Proper simulation of the flight dynamics during aerobatic maneuvers is likely to be extremely difficult and AFAIK, nobody does it very good. MSFS is laughable.

I wonder if anyone else remembers Flight Unilimited from the mid-90s. It was a dedicated aerobatics simulator with an Extra300, Sukhoi, Decathlon, Pitts and a Grob sailplane I believe. As I remember it, the flight model relating to characteristics during and after stall was superior to any sim I've flown since then. Keeping in mind that was 20+ years ago and memory has a way of becoming whatever it wants over time

NNumber481 Proper simulation of the flight dynamics during aerobatic maneuvers is likely to...

harryOP•5/12/24, 7:46 PM

I remember flight unlimited. It was fantastic (in my memories) and yes for aerobatics fs2020 is bad. I hope that fs2024 is better. In dcs I think the Christen Eagle and the Albatros are very good. Someone told me the edge 540 is better than the extra and I will try it end of the week. The yak is also good and but sometimes falls in a state similar to the extra today.

Stryker990•5/12/24, 8:11 PM

teleffb question: not sure how much difference it makes but for the ka-50 do i set the rotor blade count to 3 or 6? i mean it has 3 per rotor but it also has 2 rotors

SStryker990 teleffb question: not sure how much difference it makes but for the ka-50 do i s...

Number481•5/12/24, 9:07 PM

The only thing the blade count is used for is in the calculation of the frequency for the engine/rotor and ETL/overspeed rumble effects. Doubling the blade count would effectively double the frequency of the effect

NNumber481 Proper simulation of the flight dynamics during aerobatic maneuvers is likely to...

Vertigo (VIV)•5/12/24, 9:38 PM

That was by looking glass studios or something right? i seem to recall the splash screen. It was way ahead of its time in graphics too. Anyway, there is one sim that I currently fly that has as good or better flight dynamics, and thats condor. Soaring only though. But especially in VR, its as close to the real thing as you will get without a G forces. The amazing thing is that its developed basically by one guy in his spare time. Dont expect fs2020 graphics, but it looks good enough.

Hiob•5/13/24, 11:16 AM

Hey,
I just recently finished my kit-build rhino. I am very happy so far. But I came across a hickup.
I was flying in DCD (Mirage F1) - having a blast with it - and was tabbing back and forth between DCS and the VPcontrol software. Adjusting and testing different gain levels. Everything worked fine and suddenly the stick went all limb and dead (I briefly heard the reconnect chime).
When I looked in the control software, everything was gone. All effects unchecked, all gains zeroed, calibration reset. (Unfortunately I didn't export my settings in a conf file - lessons learned.
So far it was a one off occurrence. Any ideas what happened? Did I just crash the software or could it be some kind of hardware issue? ty

HHiob Hey, I just recently finished my kit-build rhino. I am very happy so far. But I ...

walmis•5/13/24, 12:01 PM

My guess is you didn't "Store" the configuration. "Apply" only sets the configuration in RAM and it resets to last stored configuration on restart.

Wwalmis My guess is you didn't "Store" the configuration. "Apply" only sets the configur...

Hiob•5/13/24, 12:02 PM

No, this lesson I learned already, I pressed apply and store frequently - after each adjustment basically. After the Stick went dead, I couldn't load the configuration from it neither....

Wwalmis My guess is you didn't "Store" the configuration. "Apply" only sets the configur...

Hiob•5/13/24, 12:04 PM

mind that really everything was gone. Not only my latest adjustements, but everything. It was basically erased...

Hiob•5/13/24, 12:06 PM

I might also add, that the stick itself was fine. After I re-applied all my settings from memory (and this time saved a .conf file...), the Rhino worked fine again.

FEVER 1-1 | FZG_Immel•5/13/24, 3:28 PM

EDITED because im too stupid !

scarecrow6685•5/13/24, 3:36 PM

Hi there, tnt called me about paying duty, which is fine, but I think they got my email wrong because I've never received the email..

Are you able to contact them for support on the issue?

FFEVER 1-1 | FZG_Immel EDITED because im too stupid ! 🙂

walmis•5/13/24, 4:02 PM

Hi, it should be already mounted on the Rhino for your convenience

Sscarecrow6685 Hi there, tnt called me about paying duty, which is fine, but I think they got m...

walmis•5/13/24, 4:04 PM

I see your email is correctly entered into the system, however TNT UK is a bit slow to send the required documents, I've noticed.

Wwalmis Hi, it should be already mounted on the Rhino for your convenience

FEVER 1-1 | FZG_Immel•5/13/24, 4:05 PM

EDITED because I am too stupid to recognize anodized aluminium

walmis•5/13/24, 4:05 PM

Can you take a closeup photo to confirm?

scarecrow6685•5/13/24, 4:07 PM

That's cool, thank you sir.

Wwalmis Can you take a closeup photo to confirm?

FEVER 1-1 | FZG_Immel•5/13/24, 4:08 PM

sure

FEVER 1-1 | FZG_Immel•5/13/24, 4:10 PM

NEVERMIND !!!! I scrapped with a knife to make sure, and it is indeed ANODIZED aluminium.. I was expecting some natural aluminium part. I DO APOLOGIZE TO YOU for the bothering and for the WRONG report. I am really sorry. very impressed with the whole base

FEVER 1-1 | FZG_Immel•5/13/24, 4:11 PM

I am STUPID, sorry

walmis•5/13/24, 4:12 PM

No probs

FEVER 1-1 | FZG_Immel•5/13/24, 4:13 PM

all my extensions for stick are natural aluminum and didnt expect to find an anodized part in black. and since it has exactly the same color as the internal part I thought somethign was missing. A small blade pressure confirmed mer it was indeed aluminium. Your base construction is SUPERB btw. I am really impressed witht he whole quality of the thing. now to install everything and try it. THANKS AGAIN for making this avalaible to us simmers !!!

FEVER 1-1 | FZG_Immel•5/13/24, 4:16 PM

quick question before I go. Is there a manual on how to install the 11degreee limiter ? I can take a guess but would rather follow instructions if there are any ? any page in the manual ?

FFEVER 1-1 | FZG_Immel quick question before I go. Is there a manual on how to install the 11degreee li...

Fr4Ged•5/13/24, 4:18 PM

it is in the Rhino's manual on page 7.
not too detailed but should be enough.

FFr4Ged it is in the Rhino's manual on page 7. not too detailed but should be enough.

FEVER 1-1 | FZG_Immel•5/13/24, 4:18 PM

thanks

I/JG7_Moto•5/14/24, 2:36 AM

@walmis Hi Walmis my Rhino stopped working in mid flight in IL2
I restarted PC, now works but no FFB effects
I tried DCS and same , no FFB effects
I loaded the default profile from the VP Force configurator and no luck
disconnected, reconnected and no effects
Reset motors , no luck, seems like Telem wont communicate with the joystick
Any ideas on how to fix it?

II/JG7_Moto @walmis Hi Walmis my Rhino stopped working in mid flight in IL2 I restarted PC, ...

Number481•5/14/24, 2:46 AM

Are you talking about native FFB effects (i.e. dynamic spring, trim movement) or effects from TelemFFB (engine rumble, gunfire, etc)?

I/JG7_Moto•5/14/24, 2:47 AM

Effects from Telem, gunfire engine rumble

I/JG7_Moto•5/14/24, 2:57 AM

Looking

I/JG7_Moto•5/14/24, 2:58 AM

2024-05-13 14:12:29.168 - ERROR - joystick - Exception
Traceback (most recent call last):
File "ffb_rhino.py", line 513, in timerEvent
File "ffb_rhino.py", line 582, in readReports
File "hid.py", line 163, in read
File "hid.py", line 148, in __hidcall
hid.HIDException: ReadFile: (0x0000048F) The device is not connected.

Number481•5/14/24, 3:02 AM

Can you post the whole log?

I/JG7_Moto•5/14/24, 3:07 AM

Posted it in our thread

Ice•5/14/24, 8:07 PM

Idk if it's a DCS issue, user error, or a TelemFFB issue, but sometimes in the Apache when you crash, of course the stick goes limp, but then when you spawn in new helicopter the stick just shoots all the way forward (smacked the shit out of my desk twice, thankfully not breaking anything). Then, your stick position is weirdly off center to the front about halfway to max forward deflection. The positon fixes itself after the helicopter turns on.

Ice•5/14/24, 8:07 PM

I think it's DCS setting the stick position to the middle of full pitch down when the helicopter is off, then after you turn it on, and wiggle the controls a bit, it recenters normally.

@Touch_Of_Legend if I get figured it out I will will post it here. I get all telemffb effects- even

Similar Threads