I have had a couple week break from DCS. I came back and was prompted to update telem. Usually it br

I have had a couple week break from DCS. I came back and was prompted to update telem. Usually it brings my profiles in. This time it did not. Does the current build have a way to import them? Are we still using a config.user.ini? Sorry I tried reading back last night and didn't find anything that helped.

JJakeSixx33 | 744 |I have had a couple week break from DCS. I came back and was prompted to update ...

Number481•5/23/24, 12:12 PM

no, the user ini files were from the old non UI based config model. The config in the new version is stored in an xml file in your AppData folder.

The user configuration is carried forward from release to release, as are the system settings (which are stored in the registry).

The only exception to this is this specific release where the format of the system settings stored in registry has changed. Per the release notes, You will need to re-configure your system settings. All of your model settings will be retained.

NNumber481 no, the user ini files were from the old non UI based config model. The config ...

JakeSixx33 | 744 |OP•5/23/24, 12:34 PM

First I appreciate all you and Walmis have done to make the Rhino and Telem a better product with each release. That being said you have a much more intimate understanding of how all this works, than the mere user. I read the same blurb in the release notes. It doesn't tell me what to do. When I ran Telem I had to reconnect to DCS and in the lower right there seems to be a pointer to profiles, which won't let you point to the folder containing them. Do I need to re setup the entire configurator and/or telem?

JJakeSixx33 | 744 |First I appreciate all you and Walmis have done to make the Rhino and Telem a be...

Number481•5/23/24, 12:45 PM

Those are for configurator profiles that you want to push to your device when TelemFFB starts or exits, they are a convenience feature and you don't need to use them if you don't have a need/desire to leave your Rhino with a different setup depending if you are/are not running TelemFFB. Those settings have nothing to do with individual model effect settings.

You can read about the dynamic configurator profile assignment in the manual here: https://docs.google.com/document/d/1YL5DLkiTxlaNx_zKHEYSs25PjmGtQ6_WZDk58_SGt8Y/edit#heading=h.hlw8w12wb0nz

Google Docs

VPforce Rhino Manual

VPforce RHINO FFB User Manual Version 0.7 (WIP) Table of Contents 1. Welcome 1 2. Getting Started 3 2.1. Technical Specifications 4 2.2. Physical Setup 5 2.2.1. The VKB Adapter 6 2.2.2. The WinWing Adapter 6 2.2.3. The RHINO Throw Limiter Adapters 7 2.3. Initial Connection and Updating th...

slowmover•5/23/24, 3:55 PM

Anyone knows what is this error?

Sslowmover Anyone knows what is this error?

Number481•5/23/24, 3:57 PM

did you copy the EXE instead of creating a shortcut?

slowmover•5/23/24, 3:57 PM

this came up after i did an update

slowmover•5/23/24, 3:58 PM

i think now i am okay

slowmover•5/23/24, 3:59 PM

it was an antivirus problem

Number481•5/23/24, 3:59 PM

ahh... that ol' bugger

slowmover•5/23/24, 4:00 PM

i guess i am updated now

Littlesack•5/24/24, 12:34 AM

Is anyone running all sliders in vp software at or near 100? Is it even possible? For me it seems impossible to set anything at 100 without getting the beep error. Even the tiniest stick movement will cause the beep and the stick will flop over. It's making the process of fine tuning settings very difficult especially when adding telemffb into the mix and not knowing exactly which setting is the likely cause. I fly dcs and msfs.

PiNKSH!T•5/24/24, 12:43 AM

I believe stick height/weight has a bit to do with it but different ppl can get instability at different settings. But I don't think anyone has all sliders set to 100%.

PiNKSH!T•5/24/24, 12:43 AM

PiNKSH!T•5/24/24, 12:43 AM

that's my settings tab for the F-18 in DCS

PiNKSH!T•5/24/24, 12:44 AM

PiNKSH!T•5/24/24, 12:44 AM

Effects Tab

PiNKSH!T•5/24/24, 12:45 AM

if you are getting too much instability try lowering the settings in the Expert section of Settings Tab

PiNKSH!T•5/24/24, 12:45 AM

but you should ask Walmis before messing around too much with those

PiNKSH!T•5/24/24, 12:46 AM

ppl usually find Friction to be a cause of instability same with Inertia.

LLittlesack Is anyone running all sliders in vp software at or near 100? Is it even possible...

PiNKSH!T•5/24/24, 12:46 AM

Littlesack•5/24/24, 1:13 AM

How can I know which setting to lower and if I should do it in vpforce or telemffb?

LLittlesack How can I know which setting to lower and if I should do it in vpforce or telemf...

PiNKSH!T•5/24/24, 1:41 AM

vpforce config is for your "global settings" Telemffb is to tweak the effects per aircraft (tbh I'm still on the older telemffb app)

PiNKSH!T•5/24/24, 1:43 AM

basically the Settings Tab is where you set the overall limits for the base, then the Effects Tab is where you set what % of those limits the base will let the sim use eg. If you set the Spring to 100% in Settings Tab then to 50% in the Effects Tab the sim will be able to use 50% of the 100% Spring force.

PiNKSH!T•5/24/24, 1:44 AM

So a Spring setting of 100% then the effect spring setting at 10% will only let the sim use 10% of the overall Spring "power"

PiNKSH!T•5/24/24, 1:46 AM

Friction & Inertia (at least for my set up) seem to cause the most instability, you see on my Setting Tab Friction is set to only 10% then in the Effects Tab Friction is only 10%, so that is only using 10% of 10% if you get what I mean.

PiNKSH!T•5/24/24, 1:50 AM

From my understanding (I may be wrong talk to Walmis) the Expert Settings Hz seem to be the power ie. electrical power to the motor for those effects.

Littlesack•5/24/24, 1:55 AM

I have trouble understanding why the settings can seemingly go so far beyond the capability of the hardware. Why do we have to limit anything so far below the maximum just to avoid getting an error? If 100 was the true maximum for any setting this process would be much easier.

LLittlesack I have trouble understanding why the settings can seemingly go so far beyond the...

PiNKSH!T•5/24/24, 1:59 AM

Yeah obviously Walmis would be the guy to answer that one but I gues it depends on the settings combination. Have you tried all the sliders in the Settings tab to 100% then Effects Tab put everything on like 1% & work up from there in small increments. Keep in mind that I have Friction on 10% of 10% so you will need to work the settings up in very small amounts.

PPiNKSH!T I believe stick height/weight has a bit to do with it but different ppl can get ...

Toddimus•5/24/24, 2:00 AM

With my dual 8604 “Greater One-Horned Rhino “ and my 8604 TPR FFB pedals, I’m at 100% on all sliders. But they are different animals than the “Common Rhino”.

Toddimus•5/24/24, 2:01 AM

https://www.worldwildlife.org/species/greater-one-horned-rhino

PPiNKSH!T Yeah obviously Walmis would be the guy to answer that one but I gues it depends ...

Littlesack•5/24/24, 2:11 AM

I haven't tried that, but what is the purpose of setting anything to a percent of a percent? That seems redundant and unnecessary. One setting should be able to accomplish what you want.

Dentedend10•5/24/24, 4:44 AM

Hi! I have received my unit. I

Dentedend10•5/24/24, 4:45 AM

m trying to put it together, however, the VKB adapter is extremely tight on the F14 grip and I cannot get it to sit all the way. The Modern Gunfighter grip sits without any problem, but I'd need my F14 grip on there. I applied a lot of force (not pinching on the cable), but there is still a gap. Any ideas or solutions? thanks!

LLittlesack I haven't tried that, but what is the purpose of setting anything to a percent o...

Toddimus•5/24/24, 5:28 AM

The way I think about it is that in VP config is the max possible force. I have that at 100%. You can then reduce any forces from within the TelemFFB app and they will be proportionally decremented per your TelemFFB settings. I’m relatively new to this so I might be mistaken but that’s how I’m rolling.

slowmover•5/24/24, 5:53 AM

Has anyone ever brake it like me?I have a 40cm extension and i broke it with the F4E

LLittlesack I have trouble understanding why the settings can seemingly go so far beyond the...

walmis•5/24/24, 6:51 AM

The problem is that we don't know the true maximums. The system can have different motors / drive ratios / weights and that contributes to different stability margins.

The sliders in the Settings tab set the per effect global limits
The basic effects in the Effects tab (such as Spring, Damper) create a on-device effect similarly how an FFB application would and adheres the limits set in the settings tab. Those effects (in Effects tab( are overriden when an FFB application takes over.

Dentedend10•5/24/24, 8:01 AM

Also, could someone provide some default settings for the config software? Coming from no FFB I don’t know how it should feel

DDentedend10 Also, could someone provide some default settings for the config software? Comin...

Touch_Of_Legend•5/24/24, 8:33 AM

The default is part of the set up but you’ll have to jump in a plane to see how it feels.

Try something snazzy like a warbird

Sslowmover Has anyone ever brake it like me?I have a 40cm extension and i broke it with the...

Touch_Of_Legend•5/24/24, 8:41 AM

Think of an extension like force multiplier.

On one end it lowers the force we receive from the motor by moving the center out.

On the other end (our end) think of it like a lever, or more like a pry bar or what’s commonly called a breaker bar for taking apart BIG stuff.

The more distance you have the greater force you can exert (and by resisting it as well).

Sort of like trying to take off your tire with a short socket wrench takes a lot more force than it does with the long lug nut break bar.

Same idea but backwards so.. yep an extension allows you to push harder with the same physical force.

The other main culprit with ANY 3D print is flex and failure over time.

In other words sometimes S just happens but the beauty is you can just print another.

Facts are parts sometimes fail and that’s just part of the DIY game.

Thanks for sharing though because I’m ALWAYS interested in part failures and if they can be mitigated or if it’s just a wear and tear thing, print orientation thing, soooo many variables to consider so again thanks for sharing.

Happy re printing and Happy flying!

Hiob•5/24/24, 9:41 AM

Hi, is there a step-file of the gimbal-stick-connector? I can only find an .stl - thank you!

Sslowmover Has anyone ever brake it like me?I have a 40cm extension and i broke it with the...

Hiob•5/24/24, 9:43 AM

hi, I answered you in the DCS-forum as well. I think a 40cm extension is quite excessive for a 3D-printed gimbal. Leverage and so..... It seem to have broken along the layers. Have you printed it yourself? If so, try to print it in a different orientation (make the layers perpendicular). It may look less nice, but is stronger.

Hiob•5/24/24, 9:46 AM

ideally, I would print it, so that the layers are oriented on the roll axis, when the stick is assembled. That would give the greatest strength towards the pitch axis, where (assumingly) the greatest forces are applied.

Wwalmis The problem is that we don't know the true maximums. The system can have differe...

Number481•5/24/24, 10:54 AM

pin this please... it comes up at least once a week and is always explained differently by whomever responds

slowmover•5/24/24, 11:22 AM

Thanks guyz i will make a smaller extension

slowmover•5/24/24, 11:23 AM

remember me something. when i calibrate it center what value should be?

Sslowmover remember me something. when i calibrate it center what value should be?

Number481•5/24/24, 11:30 AM

you want center somewhere around 2048, but what really matters is that the endstops are between 0 and 4096

Sslowmover Thanks guyz i will make a smaller extension

Hiob•5/24/24, 11:34 AM

Your gains seem excessive. Can you show your corresponding effects page?

Wwalmis The problem is that we don't know the true maximums. The system can have differe...

Hiob•5/24/24, 11:37 AM

maybe pin this answer - It is valuable explanation. I got it completely backwards (which gives probably the same result, but still - this is helpful in understanding the software)! TY

HHiob Your gains seem excessive. Can you show your corresponding effects page?

slowmover•5/24/24, 11:39 AM

i use recalibrate it

Hiob•5/24/24, 11:42 AM

As I undertstand it, the effects-gains and settings-gains are multiplied with each other (and then multiplied by master gain) - so in effect it probably doesn't matter on which side you adjust them, as long as the product isn't too high. @walmis , please correct me if I got it wrong.

I have had a couple week break from DCS. I came back and was prompted to update telem. Usually it br

Similar Threads

Similar Threads

Similar Threads