And also to make it clear, our implementation of the controls for the F-14 was made by **fat creason

And also to make it clear, our implementation of the controls for the F-14 was made by fat creason, same as the FM - but I'll also take a look on how we can make it improve your experience with the F-14 - yet I'll start from the F-4E as I have much more detailed knowledge about that.

GroverOP•5/29/24, 1:28 PM

Before I return to coding, just thought I could drop another chart I saved as a reference. The test pilot was tasked to pull the stick and then return to the pre-pull position. The stick position plot is a bit squeezed to read, but look at the stabilator position and how it keeps oscillating for over 10 seconds after the pull up. Please note, that it's with stab. aug OFF, so all those oscillations must come from the pitch controls (including the feel trim).

GroverOP•5/29/24, 1:30 PM

That's the result of using bobweights - you trade better (higher) force gradients with G for more inertia making the oscillations more pronounced

Number481•5/29/24, 1:40 PM

Man.. it must have been a real trip to fly that airplaine IRL

Boggy•5/29/24, 1:51 PM

GarrafaBr•5/29/24, 3:50 PM

Does anyone have a seat belt tensioner? Is it worth it? Does it adds to immersion for flying (g forces)?

Red Magic•5/29/24, 4:03 PM

I feel like a lot of the low speed slop complaints could be resolved with adding more potential torque to the stick base as well. Then these low ft-lb %s can still provide easy stick "centering" without making any sacrifices in creating force gradients (curves) and clipping at the high ends

GGrover Before I return to coding, just thought I could drop another chart I saved as a ...

Touch_Of_Legend•5/29/24, 4:16 PM

I just want to say Thank you for all you do and continue to do for the community.

Can’t wait to see what you do with the Rhino so welcome to the Family

Fletch•5/29/24, 8:16 PM

Gotst me invoice today and just paid it. Looking forward to ffb stick for DCS helis!

VPforceBot•5/30/24, 8:11 AM

:package:

RHINO #0559 Has Shipped!

VPforceBot•5/30/24, 9:01 AM

:package:

RHINO #0560 Has Shipped!

VPforceBot•5/30/24, 10:27 AM

:package:

RHINO #0561 Has Shipped!

GroverOP•5/30/24, 3:07 PM

1, 2, 3, radio check... am I red? am I red? I'm red, yay

GGrover 1, 2, 3, radio check... am I red? am I red? I'm red, yay 🙌

Touch_Of_Legend•5/30/24, 6:41 PM

Hell yeah welcome to the family

Touch_Of_Legend•5/30/24, 6:41 PM

(Greens are DIY builds)

SR-F_Winger_[73]_David•5/30/24, 7:28 PM

Hi guys. One DIY kit is ready to ship if anyone is interrested shoot me a pm.
Here is a pic of the asembled unit. Only diffrence is the kit in question doesnt have carbon surface finish but texured PEI finish.
Kit comes with everything you need to build your own Rhino except for the Motor kit wich is available a Walmis VPForce store.
Gimbal comes completely preassembled. All wiring is preassembled with exception for the motor powercables wich come with the motor kit.

SR-F_Winger_[73]_David•5/30/24, 7:30 PM

GGrover 1, 2, 3, radio check... am I red? am I red? I'm red, yay 🙌

WhereNoLarkFlew•5/30/24, 8:24 PM

You work for HB?

WWhereNoLarkFlew You work for HB?

GroverOP•5/30/24, 8:35 PM

Aye!

SwiftVengeance•5/30/24, 8:53 PM

Hi, does anyone have a virpil grip or collective. Im trying to figure out how the virpil bases communicate buttons and analog positions with the grips. well I know the buttons are through cd4021b shift registers but im not sure about the throttle axis. maybe they use a spi adc? or maybe I dont have to worry about that because its done in the base when the connector gets twisted?

Teeks•5/30/24, 10:11 PM

Kinda annoying. Dartford is 50 miles away ffffssss

GGrover And also to make it clear, our implementation of the controls for the F-14 was m...

Virus•5/30/24, 10:28 PM

@Grover hi man...good to see you here...and good you got a red color

GGrover Aye!

WhereNoLarkFlew•5/30/24, 10:53 PM

Awesome man, looking forward to seeing what you come up with

WhereNoLarkFlew•5/30/24, 11:02 PM

@Grover Are you going to put a profile together for the F-14 as well?

yojoego•5/30/24, 11:08 PM

Is there a place to download peoples aircraft profiles for the rhino?

GGrover 1, 2, 3, radio check... am I red? am I red? I'm red, yay 🙌

JIGGAwest•5/31/24, 12:14 AM

Red team go!

WWhereNoLarkFlew @Grover Are you going to put a profile together for the F-14 as well?

GroverOP•5/31/24, 1:13 AM

At some point, yes, just can't promise on the timeline now. But that's the plan.

SSR-F_Winger_[73]_David Hi guys. One DIY kit is ready to ship if anyone is interrested shoot me a pm. He...

(

(41F) RAFAIR Dave H•5/31/24, 7:45 AM

I received one of wingers diy kits yesterday and can say that the quality of the kit is superb all 3d prints are high quality the gimbal is pre assembled and all inputs and bolts are bagged and labeled
Hope to have it assembled by end of this weekend

SwiftVengeance•5/31/24, 7:58 AM

How is the rhino able to comunicate with virpil grips that have analog axis

HrEple•5/31/24, 8:03 AM

Perhaps a channel just for profiles - that would be amazing. Should probably be divided between different sims. I would love profiles for DCS.

NNumber481 Curious for anyone else to try these settings... Gain map will cause the forces...

mark turner•5/31/24, 9:33 AM

I just tried these settings and its much better than what I had. Less sensitivity as well, tanking in the F4 definitely easier.....thanks 481

TTeeks Kinda annoying. Dartford is 50 miles away ffffssss

mark turner•5/31/24, 9:35 AM

You might want to be proactive with this, to avoid delays.......I had to call up and pay.....TNT & FedEx ( I think) are merging and its all a bit messed up. I paid TNT and I now have FedEx chasing me to pay the same bill again.

((41F) RAFAIR Dave H I received one of wingers diy kits yesterday and can say that the quality of the...

Kowalsky•5/31/24, 10:04 AM

This kit is great, I highly recommend it as @SR-FWinger[73]_David is very solid and helpful Gentlemen

Mmark turner You might want to be proactive with this, to avoid delays.......I had to call up...

Teeks•5/31/24, 10:42 AM

Aye, I paid on the 24th after emailing them, and now their tracking site is offline with a problem. What a mess

Malaromane•5/31/24, 10:53 AM

Thank you to @Jedi 11 and @Kowalsky for posting your recommendations. @SR-FWinger[73]_David : I'm a total newb around here. Where can I get more info about your kit (cost, etc)? Do I just DM you or do you have a website I can peruse?

((41F) RAFAIR Dave H I received one of wingers diy kits yesterday and can say that the quality of the...

RUSHER•5/31/24, 10:55 AM

I´m also very happy with @SR-FWinger[73]_David DIY Kit.

VPforceBot•5/31/24, 10:57 AM

:package:

RHINO #0558 Has Shipped!

VPforceBot•5/31/24, 10:57 AM

:package:

RHINO #0562 Has Shipped!

MMalaromane Thank you to @Jedi 11 and @Kowalsky for posting your recommendations. @SR-F_Wing...

Touch_Of_Legend•5/31/24, 12:17 PM

Just send him a DM with information about your general location for a shipping quote.

(I’m guessing that’s how it’s done?)

While I’ve not built one of his kits there are a couple documented in the wild, and here on the discord, so I’d say it’s a safe bet for anyone who can’t fabricate the shell for themselves.

For me personally I’m just happy when I see White names turn Green/Red because it’s like Christmas seeing all the baby Rhino’s in the wild.

Happy Friday and Happy flying yalls

HErBiZiDA•5/31/24, 12:50 PM

o7 everyone

(

(41F) RAFAIR Dave H•5/31/24, 4:48 PM

Finished building my winger kit rhino and now just needing to learn how to set this beast up, anybody got a base profile for a F-16 they can share

(

(41F) RAFAIR Dave H•5/31/24, 4:49 PM

Oh when do I get my green text

(

(41F) RAFAIR Dave H•5/31/24, 5:55 PM

Yea I’m in green

((41F) RAFAIR Dave H Finished building my winger kit rhino and now just needing to learn how to set t...

Touch_Of_Legend•5/31/24, 7:14 PM

I’m not sure if there is one but here is where you can look and/or post one if you get it nailed down

📙knowledge-baseRhino Profile Sharing

Touch_Of_Legend•5/31/24, 7:14 PM

Welcome to the Rhino Family

((41F) RAFAIR Dave H Yea I’m in green

SamNFTY•5/31/24, 7:39 PM

Green with envy

SSamNFTY Green with envy🤣🤣

Touch_Of_Legend•5/31/24, 8:15 PM

You too can be Green or Red. I’m no hater I love all the baby Rhino’s

SamNFTY•5/31/24, 8:16 PM

I'll be whatever color you want me to be

GGrover At some point, yes, just can't promise on the timeline now. But that's the plan.

WhereNoLarkFlew•5/31/24, 9:40 PM

Awesome brother, no worries take your time. Just curious.

Caprice•6/1/24, 1:58 AM

Quick question... Is all the functionality of the VPC Constellation ALPHA Prime [R] supported in the Rhino software? Mainly the brake lever I'm curious about..I don't care about the RGB but would like to turn it off if I order one.

CCaprice Quick question... Is all the functionality of the VPC Constellation ALPHA Prime ...

Number481•6/1/24, 2:02 AM

Your in luck... everything is supported except for the RGB.. which you can't turn on.

And also to make it clear, our implementation of the controls for the F-14 was made by **fat creason

Similar Threads