VPforce Controls•2y ago

Kinda annoying. Dartford is 50 miles away ffffssss

GGrover And also to make it clear, our implementation of the controls for the F-14 was m...

Virus•5/30/24, 10:28 PM

@Grover hi man...good to see you here...and good you got a red color

GGrover Aye!

WhereNoLarkFlew•5/30/24, 10:53 PM

Awesome man, looking forward to seeing what you come up with

WhereNoLarkFlew•5/30/24, 11:02 PM

@Grover Are you going to put a profile together for the F-14 as well?

yojoego•5/30/24, 11:08 PM

Is there a place to download peoples aircraft profiles for the rhino?

GGrover 1, 2, 3, radio check... am I red? am I red? I'm red, yay 🙌

JIGGAwest•5/31/24, 12:14 AM

Red team go!

WWhereNoLarkFlew @Grover Are you going to put a profile together for the F-14 as well?

Grover•5/31/24, 1:13 AM

At some point, yes, just can't promise on the timeline now. But that's the plan.

SSR-F_Winger_[73]_David Hi guys. One DIY kit is ready to ship if anyone is interrested shoot me a pm. He...

(

(41F) RAFAIR Dave H•5/31/24, 7:45 AM

I received one of wingers diy kits yesterday and can say that the quality of the kit is superb all 3d prints are high quality the gimbal is pre assembled and all inputs and bolts are bagged and labeled
Hope to have it assembled by end of this weekend

SwiftVengeance•5/31/24, 7:58 AM

How is the rhino able to comunicate with virpil grips that have analog axis

HrEple•5/31/24, 8:03 AM

Perhaps a channel just for profiles - that would be amazing. Should probably be divided between different sims. I would love profiles for DCS.

NNumber481 Curious for anyone else to try these settings... Gain map will cause the forces...

mark turner•5/31/24, 9:33 AM

I just tried these settings and its much better than what I had. Less sensitivity as well, tanking in the F4 definitely easier.....thanks 481

TTeeks Kinda annoying. Dartford is 50 miles away ffffssss

mark turner•5/31/24, 9:35 AM

You might want to be proactive with this, to avoid delays.......I had to call up and pay.....TNT & FedEx ( I think) are merging and its all a bit messed up. I paid TNT and I now have FedEx chasing me to pay the same bill again.

((41F) RAFAIR Dave H I received one of wingers diy kits yesterday and can say that the quality of the...

Kowalsky•5/31/24, 10:04 AM

This kit is great, I highly recommend it as @SR-FWinger[73]_David is very solid and helpful Gentlemen

Mmark turner You might want to be proactive with this, to avoid delays.......I had to call up...

TeeksOP•5/31/24, 10:42 AM

Aye, I paid on the 24th after emailing them, and now their tracking site is offline with a problem. What a mess

Malaromane•5/31/24, 10:53 AM

Thank you to @Jedi 11 and @Kowalsky for posting your recommendations. @SR-FWinger[73]_David : I'm a total newb around here. Where can I get more info about your kit (cost, etc)? Do I just DM you or do you have a website I can peruse?

((41F) RAFAIR Dave H I received one of wingers diy kits yesterday and can say that the quality of the...

RUSHER•5/31/24, 10:55 AM

I´m also very happy with @SR-FWinger[73]_David DIY Kit.

VPforceBot•5/31/24, 10:57 AM

:package:

RHINO #0558 Has Shipped!

VPforceBot•5/31/24, 10:57 AM

:package:

RHINO #0562 Has Shipped!

MMalaromane Thank you to @Jedi 11 and @Kowalsky for posting your recommendations. @SR-F_Wing...

Touch_Of_Legend•5/31/24, 12:17 PM

Just send him a DM with information about your general location for a shipping quote.

(I’m guessing that’s how it’s done?)

While I’ve not built one of his kits there are a couple documented in the wild, and here on the discord, so I’d say it’s a safe bet for anyone who can’t fabricate the shell for themselves.

For me personally I’m just happy when I see White names turn Green/Red because it’s like Christmas seeing all the baby Rhino’s in the wild.

Happy Friday and Happy flying yalls

HErBiZiDA•5/31/24, 12:50 PM

o7 everyone

(

(41F) RAFAIR Dave H•5/31/24, 4:48 PM

Finished building my winger kit rhino and now just needing to learn how to set this beast up, anybody got a base profile for a F-16 they can share

(

(41F) RAFAIR Dave H•5/31/24, 4:49 PM

Oh when do I get my green text

(

(41F) RAFAIR Dave H•5/31/24, 5:55 PM

Yea I’m in green

((41F) RAFAIR Dave H Finished building my winger kit rhino and now just needing to learn how to set t...

Touch_Of_Legend•5/31/24, 7:14 PM

I’m not sure if there is one but here is where you can look and/or post one if you get it nailed down

📙knowledge-baseRhino Profile Sharing

Touch_Of_Legend•5/31/24, 7:14 PM

Welcome to the Rhino Family

((41F) RAFAIR Dave H Yea I’m in green

SamNFTY•5/31/24, 7:39 PM

Green with envy

SSamNFTY Green with envy🤣🤣

Touch_Of_Legend•5/31/24, 8:15 PM

You too can be Green or Red. I’m no hater I love all the baby Rhino’s

SamNFTY•5/31/24, 8:16 PM

I'll be whatever color you want me to be

GGrover At some point, yes, just can't promise on the timeline now. But that's the plan.

WhereNoLarkFlew•5/31/24, 9:40 PM

Awesome brother, no worries take your time. Just curious.

Caprice•6/1/24, 1:58 AM

Quick question... Is all the functionality of the VPC Constellation ALPHA Prime [R] supported in the Rhino software? Mainly the brake lever I'm curious about..I don't care about the RGB but would like to turn it off if I order one.

CCaprice Quick question... Is all the functionality of the VPC Constellation ALPHA Prime ...

Number481•6/1/24, 2:02 AM

Your in luck... everything is supported except for the RGB.. which you can't turn on.

NNumber481 Your in luck... everything is supported *except* for the RGB.. which you can't t...

Caprice•6/1/24, 2:03 AM

Thanks very cool

CCaprice Thanks very cool 😎

Number481•6/1/24, 2:06 AM

Functionally great grip... I'm not fussed about it looking like a space grip. But I hated the hats so I made my own

https://www.printables.com/model/536591-virpil-replacement-hats

Printables.com

Virpil Replacement Hats by mjfmaker1 | Download free STL model | Pr...

Replacement hats for various Virpil devices (Alpha, Alpha-Prime, CM3 Throttle) | Download free 3D printable STL models

NNumber481 Functionally great grip... I'm not fussed about it looking like a space grip. ...

Caprice•6/1/24, 2:10 AM

Cool, I'm currently using the mongoose and I really hate the 8 way hats as they never click the direction you want.. happy to see this one uses only 4 way .

Scarlet•6/1/24, 2:14 AM

I use the left hand Alpha for my collective and it's great. The hats could be better, I might but a rubber braille dot on top of each one. But it's a great grip and the scroll wheel is a fantastic and unique feature

SScarlet I use the left hand Alpha for my collective and it's great. The hats could be be...

Number481•6/1/24, 2:34 AM

There’s also hats in that printables link for the alpha-L (and cm3 throttle), too

Scarlet•6/1/24, 2:34 AM

Nice

Sup3rToc0!•6/1/24, 6:34 AM

Anyone know of a L shaped stick extension I can get? I have a VKB gunfighter grip. I looked at the VKB, Virple, and Winwing stores and non have an L shaped stick extension. Would I have to build my own?

Scarlet•6/1/24, 6:36 AM

I'd like to second that question but for goose-neck cyclic style extensions

Tinman•6/1/24, 7:17 AM

https://qr4rigs.com/index.php?main_page=product_info&cPath=46&products_id=59

Joystick Extension for Thrustmaster and Virpil (VPC) [TMVPCStickExt...

QR4rigs, Quick Release Mounts for Sim Rigs Joystick Extension for Thrustmaster and Virpil (VPC) [TMVPCStickExt] - The Joystick extension fits the Thrustmaster Warthog/Cougar and Virpil (VPC) Joystick ranges and is ideal when using the QRDee Center Mount System. The main tube is 30mm in diameter and comes in a choice of two different styles: Kink...

Tinman•6/1/24, 7:19 AM

Others use this in combination with a straight pipe of their chosen length.

Tinman•6/1/24, 7:20 AM

https://virpil-controls.eu/vpc-flightstick-z-extension.html

VPC Flightstick Z-Extension

★ Designed for Space Sim Cockpits
★ "Z" Style Extension to Create your own Omni-Throttle
★ Premium All-Metal Construction
★ Adjustable Grip Angle

SSup3rToc0!Anyone know of a L shaped stick extension I can get? I have a VKB gunfighter gri...

nubbins•6/1/24, 8:54 AM

could be a good opportunity to diy? since you don't need to worry about wires inside the extension, it's all external connection for vkb

Bob Bushman•6/1/24, 9:54 AM

That z grip is as close you'd get to an l, I'd doubt you actually need and L.

The grip end of that swivels so it makes a fully straight up stick, it just has a 15cm offset, it does build nearly 11cm to though.

SSup3rToc0!Anyone know of a L shaped stick extension I can get? I have a VKB gunfighter gri...