XOn my LeGO
Hwont affect desktop mode, just gamescope-session
XThats what I thought 
Aill be back in maybe 2 hours :/ can you @ me for all ideas? i will try it later
XIf you are getting a blank screen on gamescope after creating that conf file you can simply remove it and gamescope will load with the system CLIENTCMD options
Hnp will look into a workaround fot making steamlink work in gamescope session at least, wont make it auto work on desktop though since it will cause the portal popup to appear each time steam starts
SOk, looping back in over here; experienced a system lock once again, was able to capture VIA SSH, but the only message I got was:
Which seems to have likely generated due to heavy system load, and might not be responsible for the crash itself?
perf: interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 79000Which seems to have likely generated due to heavy system load, and might not be responsible for the crash itself?
ZThere are no global options for that i suspect
Zits builtin in the script, cant be overriden by enviroment.d
PAny reason why I'd lose the ability to paste into Discord?
Hwas that in journalctl or dmesg?
SThat was in dmesg
XRight and if something isnt right in the override conf that was created, you can revert by simply deleting that conf file 
Zyep
Hwe would ideally like the whole dmesg then, give me a sec
X@antheas Thank you for checking for me! Going to take the kids to the park; hope you have a great weekend
Ayou too
WDo you think it would be worth having a linux-for-beginners or some other named channel in this discord? We have quite a few people that have just switched over from Windows and it might be a nice place for them to ask questions there
XI could see the benefit in that. Bazzite is getting recommended quite a bit to people who maybe havent tried linux before.
Hfull log
errors and warnings only
it will upload the logs and you can give us the links
journalctl -k -b -1 -o short-precise | fpasteerrors and warnings only
journalctl -k -b -1 -o short-precise -p 4 | fpasteit will upload the logs and you can give us the links
Hok so can you confirm that its the same if it happens again next time?
also i saw you have an nvidia card, can you confirm in system settings that you are in the X11 session (as that is the most stable for nvidia users atm until new driver lands)
also i saw you have an nvidia card, can you confirm in system settings that you are in the X11 session (as that is the most stable for nvidia users atm until new driver lands)
SCan confirm NVidia 2070Super; I am on X11 due to the aformentioned issues with Wayland
Hfair
SSome more info, fwiw - I had this also occour on Wayland, and also initially thought it to be a GNOME/Mutter issue, as it was happening (Seemingly more frequently) there, but moved to Plasma 6 on a fresh install, and still occouring
Hthe perf message has to do with cpu frequency scaling, might not be what actually causes the issue though
Zokay found a hint of how to avoid the popout for
steam -pipewireyeah sadly @SoberSquid i dont see anything specific that sticks out, maybe
ujust logs-last-bootonly works for wlroots based compositors from what i can read there 
Zoof, there must be some kde version then I assume, gonna check
L@HikariKnight as a ujust wizard (I assume most of the maintainers and contributors are to some extent). What are your thoughts on the feasibility of a ujust command that sets up ALVR for folks that want VR gaming on Bazzite? I didn't see it in the commands and unsure if this is a ridiculous ask. But was curious.
Hwell i have no VR stuff so i cannot do any testing, so if you give me a 100% reliable way to put it on bazzite i can make an ujust for it whenever i have the time to sit down with it.
Dare these files necessary to exist in the base image for bazzite?
was hoping to make an rpm to install my own, but if the files are already there, they will conflict. Was also thinking of doing this in place of a custom rpm https://discussion.fedoraproject.org/t/another-way-to-customize-sddm-under-kinoite/37773
was hoping to make an rpm to install my own, but if the files are already there, they will conflict. Was also thinking of doing this in place of a custom rpm https://discussion.fedoraproject.org/t/another-way-to-customize-sddm-under-kinoite/37773
Fedora Discussion
Because the config file of sddm is under /usr/share it is not possible to install sddm themes and change background pictures as normal. @nullrequest has thought of making sddm themes a rpm package and use rpm-ostree to install it. see hear However, she only provides source code but not binary program which makes it really inconvenient to use. ...
Hi am having my hands full with end of season stuff with work this month and then i immediately go on vacation for 3 weeks 
Hso its a tight schedule for me
Doh actually the wayland-session looks like it has code in it, but Xsetup, the one im interested in, is empty
LI'll do some testing and get back to you. No worries, I had no expectations of it happening anytime soon. Just was curious.
Hoh god i completely forgot about the 
kf.svg spam from plasmashell atm 
H.. is that something end users should do something about?
Hi guess it makes it easy to see when something different is in the log 
Hnope its upstream with plasma
HHey, when making Containers, what is the difference between docker.io and quay.io?
Hyeah nothing useful in the logs so i am sadly dumbfounded as to whats happening sadly 
Aquay is slow as f
Hoh, yeah?
Aquay is fedora docker.io is docker
Awell its 10mb/s
Aghcr.io is 100mb/s+
Hyou mean when making them, or as they run on the machine?
