Ahhh someone else who uses the multipurpose UFC I see.
Ahhh someone else who uses the multipurpose UFC I see.
DYeah but if you dont get the chair your back may start hurting so you cant do the vacuuming anymore 
SThe chair is really solid. When I had my mounts on another chair, the chair was the weakest link by far
SAbsolutely love it
CJust had to remove mine from the cockpit, as the throw from the rhino kept hitting it.
Hence looking for different mounting so,unions at the mo
Hence looking for different mounting so,unions at the mo
SI hope mine is mounted far enough out to not cause that
CBefore and after photos of the current setup
THere is the make shift pedestal I’m making.
I’ll cut and carpet the base board same as the chair.
Metal plate is the foot rest for the pedal mount.
Easy peasy little pedestal with some drawers to hold the extras and cords or whatever you’re not using.
Like I said it’s WIP so don’t judge me but yeah.. Solid mount is what I’m after as well
I’ll cut and carpet the base board same as the chair.
Metal plate is the foot rest for the pedal mount.
Easy peasy little pedestal with some drawers to hold the extras and cords or whatever you’re not using.
Like I said it’s WIP so don’t judge me but yeah.. Solid mount is what I’m after as well
SCrosswinds as well. Noice!
CThe Rhino is currently on the mounts lowest setting, but is way to high realistically. So figure mounting it on the chair lower down, will mean the not only is it in the correct height but it won’t hit the ufc. Win win.
CThankyou, old ones, V2s that I’ve added the new piston mod to.
COhhh wheel stand pro, nice. That might be an idea then. Currently only use mine for the pedals and collective
TYep I see yours hiding in there hahaha
But yeah it would move it down and closer to the crotch as well
(NOT TO CLOSE)
But man mine feels so perfect when I do a mock roll up for full control surface deflection check..
Like she’s perfect
But yeah it would move it down and closer to the crotch as well
(NOT TO CLOSE)
But man mine feels so perfect when I do a mock roll up for full control surface deflection check..
Like she’s perfect
NPretty happy with my ghetto 2x4 + plywood modified Virpil desk mount. I recently replaced the adjustable furniture legs I was using (because they were wobbly) with a small plywood pedestal which is secured to the floor with 3m micro suction “tape”.
Pretty easy to disconnect from the desk and pop it off the floor if needed.
Pretty easy to disconnect from the desk and pop it off the floor if needed.
TYeah man I love this! Plus you know I’m all about some DIY hahaha that’s how I roll
I@walmis How hard would it be to add a second dial to control each motor separately? I have the factory assembled version. Sometimes I feel the pitch forces are weaker than aileron forces, I have modified the graph and that helped somehow but having a dial would be a lot easier.
VWhat is the "Machined Aluminum Grip Mount Upgrade for Rhino, Anodized, Black - 49€+VAT" on the order form? is it needed for TMWH compatible grips and extensions?
RHey Moto! For warbirds a lot of the time the ailerons would stiffen up more than the pitch control, since pulleys and bobweights were more optimized for such. So the difference between the two in this case for WW2 is I think generally ok, without pulling out a calculator
RIn a non-FFB configuration, you can see in a diving P51 for instance that rudder and ailerons will constrict in control in DCS before the elevators
RReminds me, ffb MFGs 
ITrue, but still think pitch control could be a bit stiffer than it is, specially the initial pull which is too soft, compared to how stiff roll is represented in FFB, which I think its really well modeled. This is how it feels IRL in the warbird I fly.
TIt’s an upgrade to the grip attachment threads from 3D printed to Aluminum.
TBoth the stock 3D printed and aluminum versions are compatible with TM and Virpil grips.
VOK, thanks!
BDo you guys have a deadzone set to your Rhino (in the Rhino settings software, not dcs controls)?
Ano
RNo
BCool , ok.
V:package: 
RHINO #0565 Has Shipped!
RHINO #0565 Has Shipped!V:package: 
RHINO #0567 Has Shipped!
RHINO #0567 Has Shipped!DOnly 971 to go 
SThey're getting out pretty quickly though
TThe list moves slowly but the numbers don’t match pre order numbers.
So for instance every so often he will update the list with everyone who dropped off and you will drop 150 spots over night.
So for instance every so often he will update the list with everyone who dropped off and you will drop 150 spots over night.
TThe bot is showing actual sales shipments and doesn’t account for drop outs.
For that he updates the list and that’s why it’s never actually a 1000 unit wait
For that he updates the list and that’s why it’s never actually a 1000 unit wait
TAnd yeah the good part about being on the wait list is you’re here hanging out and watching the “proof in the pudding” so to speak.
You’re learning and absorbing tips and tricks while watching the software improve with updates AND you get to see its all legit.
You also get to meet some cool Rhino drivers and hear the feedback or tips and tricks from their set ups
You’re learning and absorbing tips and tricks while watching the software improve with updates AND you get to see its all legit.
You also get to meet some cool Rhino drivers and hear the feedback or tips and tricks from their set ups
TSo the waiting sucks but it’s not for nothing. It has its good points even for those of us who DIY
BYeah by the shipped units ovrr time I estimated almost a year and half, but presto barely 7 months in I got pinged.
Had it ordered, paid, and shipped that same day.
That just happened to be december 23, so probably handed to the post office 20 minutes before everyone buggered off for a week
Had it ordered, paid, and shipped that same day.
That just happened to be december 23, so probably handed to the post office 20 minutes before everyone buggered off for a week
DThats great news! I mean I just like making a little fuss about it, I actually dont mind waiting that much for a single reason of where the fuck else are you gonna find a kit like this
DAbout the kits, learning etc. some of you people are mental… i mean those setups you guys got, wow
NI was LITERALLY about to ask if the machined adapter adds delay to ordering ffb kits......when tracking number popped up in my inbox the very minute I was about to hit send LOL
TThere are two other well known FFB projects. Maybe 3 so you should take a look at them all and see what’s best.
There is the Brunner, The FFB Beast and the OpenFFB project?
Anyway I think of it like the early days IPhone vs Android thing..
Yes they are both “touch screen phones”. Yes they are both fast hardware.
No they are NOT the same. Why?
Just like the first IPhone was very intuitive… natural to use because of its IOS interface the Rhino software is the true star of the show.
It’s constantly updated with new feature sets being added or developed/discussed.
It’s “natural and intuitive” to use.. Unlike some of the HOTAS software the Rhino software is on one part complex and on one part very simple.. = Easy to use and understand.
So it’s not the Hardware because anyone can add some motors to some pulleys and with enough time figure out some code..
It’s honestly the match between the two (same as the birth of the first iPhone) and how they just “work” because of the software/hardware interface.
That’s why Rhino is king and will emerge as the king from this era.
Anyone who’s ever dealt with difficult to use software can attest to the fact that you’ll spend more time setting up than flying… The iPhone and the Rhino aren’t like that because they just “worked” (and that’s because of the software not the hardware)
There is the Brunner, The FFB Beast and the OpenFFB project?
Anyway I think of it like the early days IPhone vs Android thing..
Yes they are both “touch screen phones”. Yes they are both fast hardware.
No they are NOT the same. Why?
Just like the first IPhone was very intuitive… natural to use because of its IOS interface the Rhino software is the true star of the show.
It’s constantly updated with new feature sets being added or developed/discussed.
It’s “natural and intuitive” to use.. Unlike some of the HOTAS software the Rhino software is on one part complex and on one part very simple.. = Easy to use and understand.
So it’s not the Hardware because anyone can add some motors to some pulleys and with enough time figure out some code..
It’s honestly the match between the two (same as the birth of the first iPhone) and how they just “work” because of the software/hardware interface.
That’s why Rhino is king and will emerge as the king from this era.
Anyone who’s ever dealt with difficult to use software can attest to the fact that you’ll spend more time setting up than flying… The iPhone and the Rhino aren’t like that because they just “worked” (and that’s because of the software not the hardware)
TAs a DIY guy I checked everything out before I settled on a build
I watched forums and Reddit and joined discords and saw with my own eyes the differences not just in price but also in the units.
Nothing wrong with any of the others but imho after giving each project an honest look.
Rhino won and will (imho) be king of this era.
But I encourage everyone to search and look for themselves and then decide what they think is best after watching and gathering the info like I did
I watched forums and Reddit and joined discords and saw with my own eyes the differences not just in price but also in the units.
Nothing wrong with any of the others but imho after giving each project an honest look.
Rhino won and will (imho) be king of this era.
But I encourage everyone to search and look for themselves and then decide what they think is best after watching and gathering the info like I did
DThe mere fact that Rhino was the very first I came across while searching for it says enough. Same with phones as you said. Everyone knows Iphone for a reason and not Oppo or something like that. Brunner Ice heard about but meh, didnt fancy it for some reason and the fact that every single person I asled said go with Rhino. Software itself is 70% of the product since as you said everyone can put the hardware together but to make it work and communicate as it should, thats the main issue
BSpeaking of difficult software, i have almost 25 years of experience with conputers, building, support, etc, even wrote some very jank custom solutions at some point.
But the esrly virpil software was a headache, i bricked the firmware on my throttle at least five times before I figured how to do it the correct way, fortunately it defaulted into bootloader and you can try again.
Its become a lot better since then.
But the esrly virpil software was a headache, i bricked the firmware on my throttle at least five times before I figured how to do it the correct way, fortunately it defaulted into bootloader and you can try again.
Its become a lot better since then.
Nthat's a good analogy
NThe FFbeast crowd likes to say that it is Rhino-but-better, but while there is truth to that statement I don't think it's going any further until they make something on par with telemffb
TYep I totally agree!
And you can make an all metal Rhino as well haha
But for me what you said is the true key.
Problem is… Telem is way ahead and keeps pushing active updates!
So that’s where the (early days) Apple v Android comes into play.
It’s honestly the software and this software is also.. on a rocket ship so it’s just light year ahead and moving faster
And you can make an all metal Rhino as well haha
But for me what you said is the true key.
Problem is… Telem is way ahead and keeps pushing active updates!
So that’s where the (early days) Apple v Android comes into play.
It’s honestly the software and this software is also.. on a rocket ship so it’s just light year ahead and moving faster
TI hate to sound like a fan boy but yeah… you hit the nail on the head and none of them will ever truly compete until they can get some sort of Telem stuff figured out AND they can out push updates because Rhino also keeps getting better and pushing its own bar even further…
So it’s always a great discussion but yeah that’s why I chose to ride a Rhino.
Software is King = Rhino is King
So it’s always a great discussion but yeah that’s why I chose to ride a Rhino.
Software is King = Rhino is King
TAt the same token a little healthy competition is great for the space and for fresh ideas so it’s just a great thing to be a small part of
Nthe metal part is also......just tired lol, vkb community hears PLASTIC BAD so much
Nisn't first party rhino stick connector based around an extrusion? And now with the machined adapter, no more concerns if there were any