Will you show a closer pic of the connection to the 8020 with your right angle connectors and the bl
Will you show a closer pic of the connection to the 8020 with your right angle connectors and the black plates.
SAussie confusion
Big W is a local big box store XD
Big W is a local big box store XD
Nprobably overkill, but it does weigh 10lb after all
Nchanged from the 5 hole back to 4 hole plates so i could sit a bit closer
CDid you get a soviet blue cover for a VKB MCG there? Or did you paint it?
Rwhere did you get the 4 hole plates?
Ncerakote
Nfrom foxx I think? they are pretty old, like with my original mounts from back then
Nthe 5-hole T plate is just from Tnutz
YCan someone share picture of vpforce settings on rhino ? Long time ago I had to reset settings due some fault and since then I have feeling that my base is way weaker than out of the box . Thanks in advance
WYou can import Rhino default settings from the 'configs' directory alongisde the configurator app
YI believe that is what I did and then I seen some differences in parameters (I can't really point what changed)
WPost a screenshot of your settings
YAs soon as I'll be back home
ASomnium went bezerk on the optical quality, completely disregarded audio, and now want to sell at twice the price of pimax, even more expensive than varjo, both manufacturers who have had multiple generations on the market. They have given a review sample to exactly one youtuber before bringing it on the market. I have a reservation, but I'll pass. The premiums they charge for eye and hand tracking are ridiculous.
AAnd the translucent plastic. 500 Euros extra. 600 with taxes. That's more than a Quest 3.
DNo VR can be 3500€ good. Besides the GPU you need to run DCS with such VR is probably 25 years down the road
BAm I right in thinking that that is more than double of the Rhino (4.2 nm?) ? Or am I messing things up?
BPffff...those are stupid prices. The Crystal resolution is incredible, I personally wouldn't need anything much better than that unless it's significantly cheaper or has other advantages.
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
Sohhh. beautiful:) I have the same kind of Deskmount. Just not as good looking
Xafaik 72T/12 gives 6:1 so thats 1.8x6 =~ 11nm peak
those simracing companies always specify peak torque for marketing
those simracing companies always specify peak torque for marketing
V:package: 
RHINO #0592 Has Shipped!
RHINO #0592 Has Shipped!V:package: 
RHINO #0593 Has Shipped!
RHINO #0593 Has Shipped!
TKnowing sim racing marketing, there’s a good chance aluminum just refers to the housing and the 9nm is some peak torque level that isn’t close to actual or sustained force.
BOr they could refer to sustained as 'X' seconds until they overheat.
As always we can't trust just the marketing blurb.
Until confirmed through testing, even if its just 9nm at mount point for an impulse, if the price is competitive than it can still be excellent value, at least for helicopters.
As always we can't trust just the marketing blurb.
Until confirmed through testing, even if its just 9nm at mount point for an impulse, if the price is competitive than it can still be excellent value, at least for helicopters.
JAm I going to have any issues with the Rhino using the TM F18 or F16 grips as long as I keep my extension 200mm or less?
TYeah no fans makes me wonder about overheat protection because thermal is just facts of life but if it’s cheap and gets more folks AND more importantly more games to pay attention to FFB data..
Win for the Rhino
Win for the Rhino
Aheavy TM grips with long extensions can be a challenge, but I haven't tested that myself so I don't really know
Ado note, however, that rhino basically comes with a built-in extension so if you add 20cm to that it's going to be a lot
BI got my rhino on a small pedestal barely 10cm off the floor, and my extension builds about 10cm more.
I still have to raise my arm to manage the grip, i can finger fly with my hand resting in my lap, so honestly could probably loose a few cm in height.
In short with a 20cm extension, the rhino will be on the floor.
I still have to raise my arm to manage the grip, i can finger fly with my hand resting in my lap, so honestly could probably loose a few cm in height.
In short with a 20cm extension, the rhino will be on the floor.
JThanks, found the drawing - looks like about 290mm from the bottom of the base to the threads, so I would only need 100mm max, maybe less. I assume that would improve things.
TThere is a section in the manual on balancing heavier sticks or sticks that are off center because of a curve or Z off set extension so I’d for sure give it a read as well
Jthx, will take a look
Shey guys, I got one DIY kit ready to ship on monday if someone is interested, let me know.
MStock Rhino is 9Nm
MPossibly, though Moza racing bases seem to be honestly rated at sustained torque. Then there's companies like Simagic who's 10Nm on paper is actually 13Nm on a torque wrench.
BOh cool! Thank you
Y
WYeah, those are DIY defaults. Try importing the Rhino defaults .vpconf file and hit store config, should be good to go.
Ynow it looks better thanks
SIs that true? The Moza is 499??
EMOZA Sim RacingMoza Racing
MOZA invites you to experience top-tier flight simulator solutions! We are dedicated to providing high-performance flight simulator equipment and accessories for aviation enthusiasts and professional pilots.
CShould have clarified it was my speculation
SAhh okay!
S@walmis what are your thoughts on the Moza? There’s some speculation of similarities with the Rhino going around other discords.
EAlso @walmis Is #0594 shipping today? I am anxiously awaiting its arrival!
WIt will be shipped on Tuesday (Monday is a national holiday) 
EThank you. Please see PM
WKinda curious to see the internals and what software they came up with
SI bet!
WAnd also everyone's holding their breath for the price tag