Some of the more magical things about TelemFFB's capabilities are due to walmis adding functionality

Some of the more magical things about TelemFFB's capabilities are due to walmis adding functionality to the firmware that is not part of the standard DirectX API. Which is why TelemFFB talks to the Rhino at the driver level and not via DirectX, which is also why it doesn't work with other FFB devices.

LLastRonin Someone asked who would be next? It's Winwing

nubbins•6/21/24, 11:23 PM

looks expensive if the language is suggestive of the intended audience

NNumber481 Some of the more magical things about TelemFFB's capabilities are due to walmis ...

Ice•6/21/24, 11:23 PM

Makes sense. Your work and his work are just incredible. Huge hats off to y'all.

Ice•6/21/24, 11:24 PM

I was sold the moment I hopped into the UH-1H and it felt exactly like the real one I flew.

Ice•6/21/24, 11:24 PM

Was an eye opening moment and I knew I had made a good purchase.

Ice•6/21/24, 11:25 PM

Force trim on or off, the stick forces and feel was near identical to the real Huey.

Bob Bushman•6/21/24, 11:35 PM

Neat

Old Prospector•6/22/24, 12:44 AM

Does anyone ground mount this thing?

Scarlet•6/22/24, 1:18 AM

I intend to

Old Prospector•6/22/24, 1:23 AM

How so?

Old Prospector•6/22/24, 1:23 AM

Is there a commercial ground mount?

Ice•6/22/24, 2:18 AM

I just used a piece of nice looking plywood for the base of my setup.

Ice•6/22/24, 2:18 AM

My Rhino, and pedals are bolted to it.

OOld Prospector Does anyone ground mount this thing?

nubbins•6/22/24, 2:50 AM

i saw this a while ago 🧰support

OOld Prospector How so?

Scarlet•6/22/24, 3:49 AM

Same as Ice

SR-F_Winger_[73]_David•6/22/24, 7:49 AM

Hello everyone. Due to time issues and no more free time for me I decided to sell off the kits that are in the making at a reduced price and then stop doing that.
I have 2 kits ready to ship and a few more that i ordered parts for and are in the making.
The new price is 350,- plus shipping.

At least i will finally have time to fly myself instead of preparing kits ll evenings;)
And my girl will also apprechiate having more time with me again.

JJon (Bounty_V)MFG crosswinds + ffb kit is some $800-900 when you factor shipping as well

Daz_bike•6/22/24, 9:37 AM

Good value if you already have MFG's before FFB pedals were a thing.

Jon (Bounty_V)•6/22/24, 10:48 AM

I'm still using CH Products Pro pedals so I've got all sorts of freedom to upgrade

SSR-F_Winger_[73]_David Hello everyone. Due to time issues and no more free time for me I decided to sel...

walmis•6/22/24, 11:29 AM

Thank you for your service

Stoned Kakapo•6/22/24, 1:40 PM

Any news on the mfg ffb conversion kit?

SSR-F_Winger_[73]_David Hello everyone. Due to time issues and no more free time for me I decided to sel...

JIGGAwest•6/22/24, 2:03 PM

Sent you a PM

Jon (Bounty_V)•6/22/24, 3:09 PM

https://x.com/WINWING_SIM/status/1804525007818887435

WINWING (@WINWING_SIM) on X

We recorded a refueling operation trajectory in the air! Isn't it interesting?

#WINWING #CyberTaurus #JoystickBase

Twitter

•

6/22/24, 2:41 PM

Xaero Zero•6/22/24, 3:23 PM

things getting crazier )

Bob Bushman•6/22/24, 3:37 PM

Honestly thought winwing was a year out,

Bob Bushman•6/22/24, 3:38 PM

will be interesting what the impact will be once these release, I'm suspecting there might a big drop off on the queue for rhino's....

Bob Bushman•6/22/24, 3:40 PM

Although does make sense to come out with this stuff right before the launch of msfs 2024.

voidkitty•6/22/24, 3:46 PM

I wish there were more manufacturers working on yokes haha. So far I think it's just Brunner, simionic, and flitesim.com

Reed•6/22/24, 3:50 PM

My biggest curiosity is how all these different systems will work compared to the rhino. I’d be interested in a direct drive and all metal construction. I’ll never sell my rhino it’s a collector item, atleast to me. The software and work done by all in this discord is amazing. I feel like vpforce started the ball rolling and the next year will be the year of ffb. If I’m honest I’d love to see an all metal rhino with largest motors etc. special edition so to speak. It’s great to be a right simmer.

Number481OP•6/22/24, 3:52 PM

I'd be first in line for a production SuperRhino

Bob Bushman•6/22/24, 3:52 PM

Suppose you could just buy bigger motor kit, a psu and make a new box

Bob Bushman•6/22/24, 3:53 PM

adjust the belts etc

Banan Pajen•6/22/24, 3:53 PM

The FF Beast base is metal

Number481OP•6/22/24, 3:54 PM

Several folks are already using the large motors in DIY bases....

Reed•6/22/24, 4:03 PM

I’m not a diy when it comes to electronics etc. I’d rather buy a finished product. I built my sim pit and I build my pc’s. I also build rifles etc but small electronics and such I’ll leave to the experts. A super rhino would be very cool. Truly some of the best parts of the rhino is @Number481 work on teleffb and @walmis awesome development.

JJIGGAwest Sent you a PM

SR-F_Winger_[73]_David•6/22/24, 4:10 PM

Answered.

RReed I’m not a diy when it comes to electronics etc. I’d rather buy a finished produc...

Number481OP•6/22/24, 4:21 PM

Hopefully you enjoy today's incoming update!

JJon (Bounty_V)MFG crosswinds + ffb kit is some $800-900 when you factor shipping as well

Hiob•6/22/24, 5:14 PM

When you have a 3D-Printer, you only need the motor kit from Walmis, a spool of filament and 50 bucks worth of nuts and bolts and some parts….

HHiob When you have a 3D-Printer, you only need the motor kit from Walmis, a spool of ...

Banan Pajen•6/22/24, 5:16 PM

Only the bearings are about 50 bucks, at least in my country

Bob Bushman•6/22/24, 5:16 PM

figiuring out to do 3d printing well is not entirely like hooking up a laser jet though

Bob Bushman•6/22/24, 5:16 PM

sure a new bambu labs for 1k would make it easier, but I doubt that's where most start if they aren't already comfortable with it

Hiob•6/22/24, 5:17 PM

You don’t need bearings…. (talking about my ffb-conversion of course, don’t know about others)

NNumber481 Hopefully you enjoy today's incoming update!

Reed•6/22/24, 6:43 PM

Awaiting with bells on

HHiob When you have a 3D-Printer, you only need the motor kit from Walmis, a spool of ...

Jon (Bounty_V)•6/22/24, 6:55 PM

Diy wasn't the topic but yes that's cool some people can do that.

HHiob When you have a 3D-Printer, you only need the motor kit from Walmis, a spool of ...

Col. Sanders•6/22/24, 7:02 PM

I need a kit ready to assemble. I can assemble and not much else

Number481OP•6/22/24, 7:36 PM

TelemFFB Update v20240622

"Big" update with several Quality-of-Life type enhancements. Please see below for the change log. If I @'ed you, there is something in the list below with your name on it based on a request you made or a conversation we had!.
The TelemFFB section in the manual has also been revamped.
Your installs will prompt to be updated or you can grab the latest from https://github.com/walmis/VPforce-TelemFFB/releases

Thanks as always to @smitty for his contributions and those of you who have provided suggestions and feedback.

QoL Improvements

New system tray implementation (see manual Section 4.6) @Will3D
- TelemFFB can now be sent to system tray on startup and/or close button. Window can be recalled by double-clicking the tray icon or from the icon right-click context menu
- System tray icon color indicates simulator run/pause/error state like the existing status icons
- Configuration errors (such as enabling MSFS force trim and having no binding configured) now present the error message in the UI, and generate a system tray notification for easier recognition of the issue.
Real-time settings usability improvements @Piers
- Values update in near real-time when manipulating sliders
- Manipulating sliders no longer causes a form re-load
- -/+ buttons added to left/right of slider for single step adjustments
  - Shift+Scroll wheel or left/right up/down arrow keys while hovering mouse of the slider is also supported
Minor UI overhaul
- Look and feel updates with on/off sliders in lieu of checkboxes and improved icons.
  General
Configurator effect slider overrides (see manual Section 4.12 !!!)
- Now you can directly modify, in real-time, the slider gain setting for any of the effect types without creating and pushing a separate vpconf file
- Can be overridden on a per Sim/Aircraft Class/Specific Aircraft basis
- Easy to use, but important to understand how it works and how it interacts with the existing Dynamic "vpconf" profile feature. Please RTFM!
- As with any new complex feature there are sure to be bugs or potential enhancements so please give feedback!
Minor enhancement to gear and canopy movement effects. You will feel a bump/clunk when the gear fully extend/retract or when the canopy (when applicable) closes
MSFS
Improved/Simplified settings for adjusting dynamic spring forces (see manual Section 4.13.1.2)
- Brought to you by: @smitty
- Prior "Gain" setting is removed and the "Max Force" setting is now affixed to the aircraft "Vne" speed (learned via telemetry) while maintaining true dynamic forces based on aerodynamic conditions.
- "Expo" adjustment to adjust the rate at which the force falls off at low speeds.
- RTFM for the best experience using these new settings.
  DCS
Added tail-hook movement effect (supported on a/c with tailhooks ) @kaltokri
Added wing-fold effect (F/A-18, F-14) @kaltokri
Added fuel-boom effect (supported on a/c with fuel boom/door ) @kaltokri
Added Co-Pilot/RIO Spring Override feature @Jaeger
- Can override/disable spring force when user has moved away from pilots seat. Optionally can bind a button that must also be held down.
- Seat data is not available at this time for some aircraft (like the F-4E).

Number481OP•6/22/24, 7:36 PM

Here's a short demo of the Configurator Gains Override feature in action...

Old Prospector•6/22/24, 8:04 PM

Simnautica/FFBeast looks nice but won't take Virpil grips out of the box

SStoned Kakapo Any news on the mfg ffb conversion kit?

Daz_bike•6/22/24, 8:39 PM

The last update from Walmis was that it would be open sourced for you to print your parts or buy the kit. I'm waiting for the files to be available.

Vvoidkitty I wish there were more manufacturers working on yokes haha. So far I think it's ...

Daz_bike•6/22/24, 8:43 PM

Flitesim.com seem the leader of that pack and doubt you will get a yoke with those specs any cheaper.

NNumber481 Hopefully you enjoy today's incoming update!

Daz_bike•6/22/24, 8:48 PM

I thought you were going add Directx support

DDaz_bike Flitesim.com seem the leader of that pack and doubt you will get a yoke with tho...

voidkitty•6/22/24, 8:49 PM

I don't know about that yet... MSFS has no directX FF implementation yet so everyone is just cooking up their own software. Idk if their software will be better than cls2sim or xpforce, let alone telemffb

Some of the more magical things about TelemFFB's capabilities are due to walmis adding functionality

** TelemFFB Update v20240622**

QoL Improvements

General

MSFS

DCS

Similar Threads

** TelemFFB Update v20240622**

QoL Improvements

General

MSFS

DCS

TelemFFB Update v20240622

TelemFFB Update v20240622