I’m completely hopeless with anything to do PC wise. I’ve got the best set up I could afford and I c

I’m completely hopeless with anything to do PC wise.
I’ve got the best set up I could afford and I can’t seem to get it right, I’ve set the stick up but there’s no feedback plus when I turn or put any input in, it just stays on that input until it crashes.
I’ve spent about 12 k on so far

.
Just need someone to sort it for me, I was hoping it was plug and play.
I don’t have any use for a PC other than this sim, all my stuff for work is on tablets or my diagnostic stuff.

OOneill I’m completely hopeless with anything to do PC wise. I’ve got the best set up I ...

walmis•6/24/24, 7:12 AM

Which sim you need setting up? I probably could help you via remote desktop.

OneillOP•6/24/24, 7:17 AM

Msfs 2020.
I’ve got it running but the display is terrible and I can’t get the stick settings right.
It’s a AMD Ryzen 9
7900X Processor

NVIDIA GeForce
RTX 4090
Graphics
32GB DDR5
RAM, 2TB SSD (M.2
NVMe)
240mm AIO
Liquid Cooler, 2x
200mm
ARGB Fans.
I did have a friend to set it up but he’s not been on for a while.
If you could just get the stick working for me I’ll pay for your time.

walmis•6/24/24, 7:18 AM

WDYM the display is terrible?

walmis•6/24/24, 7:19 AM

You mean graphics settings?

OneillOP•6/24/24, 9:19 AM

Yes, the display on the vr is blurry, I’ve tried different settings.
That’s not the problem, setting up the stick I bought from you is.
Like I said I’m useless with PC’s,
I’m a mechanic so I’ve never really used them.

Old Prospector•6/24/24, 11:01 AM

Which VR? Reverb G2 us pretty blurry.

OneillOP•6/24/24, 12:14 PM

It’s a PICO 4, used to be fine but after the pc did an update for msfs 2020 it’s all gone to shit, can’t see the runway lines until you are almost on top of it.

OOneill Msfs 2020. I’ve got it running but the display is terrible and I can’t get the s...

PiNKSH!T•6/24/24, 12:44 PM

Hey m8 what do you need help with re setting up the Rhino?

PiNKSH!T•6/24/24, 12:44 PM

I'm in Aus & not a PC wiz but maybe I can help??

OneillOP•6/24/24, 1:34 PM

Yes buddy, im absolutely hopeless with computers.
I’m a mechanic plus I’m halfway through my pilots licence

.
But this f ing computer shit drives me crazy

OOneill Yes buddy, im absolutely hopeless with computers. I’m a mechanic plus I’m halfwa...

PiNKSH!T•6/24/24, 1:40 PM

ok so what do you need help with? I'm guessing you have the Rhino there ready to plug into wall outlet power & the USB to PC?

PiNKSH!T•6/24/24, 1:41 PM

if you like I can jump into voice chat with you & it might be easier to explaine?

OOneill Yes buddy, im absolutely hopeless with computers. I’m a mechanic plus I’m halfwa...

PiNKSH!T•6/24/24, 1:46 PM

I'll be in voip if you want to jump in & see if I can help out

OneillOP•6/24/24, 2:03 PM

I’m in work for the next 4 hours

OOneill I’m in work for the next 4 hours 😂

PiNKSH!T•6/24/24, 2:10 PM

that's all good m8. I might not be around by then

. Feel free to hit me up when you see me online tomorrow or whenever. I'll be happy to try help out if I can m8. Goodluck in the mean time.

OneillOP•6/24/24, 2:20 PM

Cheers fella

OOneill Cheers fella

PiNKSH!T•6/24/24, 2:32 PM

no worries m8.

Majik•6/24/24, 11:38 PM

I've just started using telemffb yesterday, and when I try to load configurator profiles either on start or per aircraft, I get the following error

Majik•6/24/24, 11:39 PM

Profiles work fine when imported into the configurator manually

Majik•6/24/24, 11:40 PM

is this the library I need to install? (and if so, how would I go about doing that?)
https://github.com/libusb/libusb

GitHub

GitHub - libusb/libusb: A cross-platform library to access USB devices

A cross-platform library to access USB devices . Contribute to libusb/libusb development by creating an account on GitHub.

MMajik I've just started using telemffb yesterday, and when I try to load configurator ...

Number481•6/24/24, 11:44 PM

thats an error generated by the configurator software, not TelemFFB. I see it from time to time when doing a lot of testing with TelemFFB where I am constantly starting/exiting the app, but its by no means a regular occurence.

You can try this from CLI (assuming you don't have any additional VPforce devices, otherwise you need to specify the serial number)...
in a command prompt From the configurator install directory
VPforce_FFB_Configurator.exe -config path/to/config.vpconfVPforce_FFB_Configurator.exe -config path/to/config.vpconf

Number481•6/24/24, 11:45 PM

see if you see the same error or if it works. (this is the same command TelemFFB uses to push the profile)

Majik•6/24/24, 11:50 PM

So just tried, and running that gives me the same error

Majik•6/24/24, 11:50 PM

as I run in the CLI

Number481•6/24/24, 11:59 PM

Interesting... the error message indicates some sort of USB communications error with the device.. Yes, I realize it is working fine with the app, and its otherwise talking fine to TelemFFB. The only suggestion I have off hand would be to try a different USB port.. especially if your on a loaded up USB hub.. cheap answer for support, but thats all I got. Gonna have to wait for walmis to get proper support for the configurator app.

Majik•6/25/24, 12:39 AM

Thank you for the suggestions. The Rhino is on a fairly loaded up powered hub. I've tried different ports on two adjacent hubs with no other ports powered, but still the same issue. I don't have a cable long enough to reach the back of my pc. I also wonder if it may be the cable I'm using, it's the only printer cable I had lying around, and it's very old at this point, I've been meaning to order a new one. Otherwise, I will wait for what Walmis sees.

walmis•6/25/24, 4:40 AM

Hey, I received a similar issue via DM, this appears to have worked:

Wwalmis Hey, I received a similar issue via DM, this appears to have worked:

Majik•6/25/24, 5:31 AM

That appears to have done the job! Thanks Walmis!

radio_war•6/25/24, 7:50 PM

Have any of you y'all run into your computer not going to sleep with the rhino plugged in? If so how did you solve it. Ive looked most of the google answers and cannot figure out a solution. Thanks

Michael Nash•6/25/24, 8:37 PM

I have not had that issue in Windows 11. I do run it through a PCIE addon usb card, but doubt that is the difference.

Rradio_war Have any of you y'all run into your computer not going to sleep with the rhino p...

Bob Bushman•6/25/24, 8:51 PM

Sleep, I simply turn it off when not using it.
1: disable quick boot, so you get a fully fresh boot.
2: it shouldn't take more than 30 seconds to start it anyway if you have a sim capable PC.

That said, since I use my pc for other things as well, I have remote triggered AC switches on the sockets for the usb hub and rhino powered so it too is not powered or connected unless in use.

amadeus•6/26/24, 1:01 AM

i've heard it can be related to nvidia overlay thing and having devices plugged in that don't report a stable deadzone

Bozo VFA-86•6/26/24, 1:03 AM

if i repeat (FLY AGAIN) an instant action sortie...pitch axis goes limp F4E...going fore ant aft rapidly seems to wake it up again...telemffb running or not makes no dif....no stickys selected...oh yea...yesterday i re-routed the cable that runs from the joystick out of the rhino and into my realsimulator base so that i can use all of my 64 buttons on my realsimulator stick

BBob Bushman Sleep, I simply turn it off when not using it. 1: disable quick boot, so you get...

radio_war•6/26/24, 1:37 AM

I should add. I disconnect power to the motors when not using. But leaving the USB plug in, prevents sleep. I look into turning off quick boot. Thanks

Rradio_war I should add. I disconnect power to the motors when not using. But leaving the U...

Bob Bushman•6/26/24, 1:43 AM

Quick boot won't help in this case, I just recommend disabling it as it ie a source for a lot of windows rot.
And it doesn't actually make booting up any faster what so ever.

BBozo VFA-86 if i repeat (FLY AGAIN) an instant action sortie...pitch axis goes limp F4E...go...

MichalK•6/26/24, 12:38 PM

This is a bug on Heatblur's side. It affects airstart missions, ffb starts sending correct forces only after you slow down.

MMichalK This is a bug on Heatblur's side. It affects airstart missions, ffb starts sendi...

Bozo VFA-86•6/26/24, 7:49 PM

thank you

Moe1875•6/27/24, 4:28 AM

@walmis Hey Walmis, I found a bug in telemffb. If you invert your aileron axis. In the configurator. The lateral force will be in the wrong direction. I changed the sign in the aircrafts_msfs_xp.py (side_accel = -telem_data["AccBody"][0] * self.lateral_force_gain). Now it works for me. But an invert button like the deaceleration force would be nice.

Moe1875•6/27/24, 4:33 AM

regards Moe

MMoe1875 @walmis Hey Walmis, I found a bug in telemffb. If you invert your aileron axis. ...

walmis•6/27/24, 4:58 AM

You shouldn't invert in the configurator, unless the center dot does not correspond to actual stick movement.

Wwalmis You shouldn't invert in the configurator, unless the center dot does not corresp...

Moe1875•6/27/24, 11:16 AM

thats why I inverted the axis. the center point is movin in the opposite direction than the one I move the stick.

MMoe1875 @walmis Hey Walmis, I found a bug in telemffb. If you invert your aileron axis. ...

walmis•6/27/24, 11:21 AM

So assuming the axis moves in the correct direction in the configurator, to verify the effect : the lateral force in telemffb should add some force in the direction of the pull i.e. if you roll left wing down, and hold the plane level using rudder the stick should feel a little pull to the left due to gravity.

Wwalmis So assuming the axis moves in the correct direction in the configurator, to veri...

Moe1875•6/27/24, 11:48 AM

ok I can verify the effect. I assumed I had to feel the stick move to the rigth if I turn left on the ground. But this is wrong?

MMoe1875 ok I can verify the effect. I assumed I had to feel the stick move to the rigth ...

Hiob•6/27/24, 1:11 PM

Just to clarify: You don't have any axis inverted in DCS? When you have (properly) set the axis in the VP configurator, the axis in DCS should not need inverting.

Will3D•6/27/24, 8:44 PM

@walmis Hi Walmis. What's the chances of getting an auto calibration routine when a device is powered up ? I know almost all joysticks motion probably fall within the one motor rotation so the system knows where centre is. But for some non joystick designs ( like yokes) it is harder to do.

Will3D•6/27/24, 8:44 PM

I'm also working on a pedal design that would also fall into this category. The idea of having to calibrate before every use isn't ideal.

Rechs•6/28/24, 2:50 AM

!status

RRechs !status

VPforceBot•6/28/24, 2:50 AM

Hey @Rechs,
So the last Shipped RHINO is #0602 on 2024-06-27
Average waiting time from preorder to shipped is 208 days, median is 209 days, max is 437 days
587 Rhinos are shipped in total

HHiob Just to clarify: You don't have any axis inverted in DCS? When you have (properl...

Moe1875•6/28/24, 4:25 AM

Hey Hiob, I use MSFS not DCS. but yes everithing is set properly in the VP configurator

Moe1875•6/28/24, 4:26 AM

regards moritz

I’m completely hopeless with anything to do PC wise. I’ve got the best set up I could afford and I c

Similar Threads