Did you order the vkb adapter connector from Walmis?
Did you order the vkb adapter connector from Walmis?
Nit looks like a more accurate representation of more up to date Su-57 cockpit mockups
NAs opposed to MCGU and T50 which were both more reflective of the late Su-35 design
Nwhich is rather funny since I'm pretty sure the T50 name is supposed to evoke references to the prototype Su-57
Nnicer hats too
NT50 hats look weird compared to MCGU and the real thing
DWill do when its time for the making of the actual order itself, forgot to do it on the preorder thingy. I am still quite a long way off but VKB is now in stock
Nthe cable is integrated into the adapter
Dwhat about the stick connector itself?
N? the adapter handles that, and the cable comes out of the adapter
Nplug it into the blackbox
DWasnt there something like I need the connector for Gunfighter 2\3?
N
Nas long as you get a rev.b grip if you buy the rev.b adapter, or a rev.c grip if you buy the rev.c adapter
NOH do you have NXT right now? then you'll have to convert that grip or buy one
DOh okay so I choose which adapter I need. And it goes from the adapter into the blackbox and from there into the PC.
I have none currently, I am using the worst financial decision stick ever (simple simpit)
I have none currently, I am using the worst financial decision stick ever (simple simpit)
Nyep, definitely get the rev.c one, it is way superior to rev.b
Npair with rev.C/GF4 grips
DOk, will do so! Honestly I cant wait to get rid of this POS stick I have atm...
Pwhat colour is that m8?
Nit is this color, it always comes across weird in pictures
https://www.cerakote.com/shop/cerakote-coating/H-349/aztec-teal
https://www.cerakote.com/shop/cerakote-coating/H-349/aztec-teal
Shop Cerakote AZTEC TEAL H-349. Find the coating that fits your application. Choose from a wide variety of coatings with specific attributes and specialties.
Poh did you diy cerakote the grip?
Ntook it to a gun shop
ONice, I've been interested in doing the same. Has it held up well to your grip? I.e. no erosion.
OMaybe I'll do it on my Mongoose as a test.
Nit's only been about a month and a bit. But since it's cerakote I have significantly more confidence in it than the factory e-coat that peels on older MCGUs
Ncan't say how it will be done on T50, as that's not metal and idk how well cerakote works on polymer and what prep is needed
Iall looks the same to me
Ndunno, virpil's old hats look a lil goofy
Nnew flankr grip looks amazing
OYa I'm dying for that flnkr
OMight get my grip coated just to test the process
ODid you do anything to protect the label etching?
Nno, all the labels are gone except for the brake lever/lot code text that i specifically told him to mask off (and even then he ran into difficulties and only preserved part of it)
OGreat, thanks. Any other tips on the process?
Ni'm trying to think of anything. I don't know how the T50 looks internally so I'm not sure if there's specifics. There was a little bit of concern over fine pitch threads everywhere inside the MCGU (it has a lot of screw posts), but it wasn't a problem.
NProbably the focus will be on how to remove the paint. If that's even necessary for Cerakote on plastic? idk much about painting plastics
OYea, dreading the potential takedown.
H
Helicopter_Test.vpconf6.54KB
H@walmis here it is. The first screens is how I set it up. As I said, when tested dry, works like expected. But when loaded with TelemFFB in game (pedal mode static) the curve looks like the last picture (cut off always on the right side). The pedal in this case is limb to the right and stiff to the left.
NFWIW, if I import your profile (just using configurator), the gain map looks like the cut-off one in your last screenshot. I recreated the gain map you show.. works fine at first in the same configurator session.
Without using TelemFFB... Reload normal profile...Close configurator...open configurator...load center detent profile... looks like the cut-off one again. I think its either a read-issue or a write-issue with configurator.
Without using TelemFFB... Reload normal profile...Close configurator...open configurator...load center detent profile... looks like the cut-off one again. I think its either a read-issue or a write-issue with configurator.
A#1577 with 984 to go. See you guys in 2026 
A984 orders of Rhino on the wall
TFolks drop out quite often so it’s never the full wait.
You can ping the bot for the average
You can ping the bot for the average
AIs the command just ! Average with no space?
A!help
VAvailable commands are:
!status or !stats - get the latest statistics about Rhino production
!info <email>
RHINO base preorders here: http://reserve.vpforce.eu
Also don't forget to check out the #
faq channel for more info.
!status or !stats - get the latest statistics about Rhino production
!info <email>
- You can ask me to fetch you your preorder information. You can DM me in private so you won't leak your email address publicly.
RHINO base preorders here: http://reserve.vpforce.eu
Also don't forget to check out the #
faq channel for more info.Google Docs
Order request for VPforce products.
Please note: to reserve a VPforce RHINO FFB base, please use reservation form here.
Once the order is ready to be fulfilled an invoice will be sent to the provided email address.
Please note: to reserve a VPforce RHINO FFB base, please use reservation form here.
Once the order is ready to be fulfilled an invoice will be sent to the provided email address.
Google Docs
Enter your details here, so you can enter the waiting queue for the Rhino FFB base.
Once the queue progresses I will get in touch with further details.
Quick FAQ:
The Rhino costs - 800EUR + Shipping (~80EUR to USA/Canada on average, up to 40EUR in EU)
It is compatible with Virpil/Thrustmaster Grips out of the box
WinWing/VKB GFII grips are supp...
Once the queue progresses I will get in touch with further details.
Quick FAQ:
The Rhino costs - 800EUR + Shipping (~80EUR to USA/Canada on average, up to 40EUR in EU)
It is compatible with Virpil/Thrustmaster Grips out of the box
WinWing/VKB GFII grips are supp...
A!status
VHey @Apex,
So the last Shipped RHINO is #0593 on 2024-06-21
Average waiting time from preorder to shipped is 208 days, median is 210 days, max is 437 days
578 Rhinos are shipped in total
So the last Shipped RHINO is #0593 on 2024-06-21
Average waiting time from preorder to shipped is 208 days, median is 210 days, max is 437 days
578 Rhinos are shipped in total
