Will do when its time for the making of the actual order itself, forgot to do it on the preorder thi

Will do when its time for the making of the actual order itself, forgot to do it on the preorder thingy. I am still quite a long way off but VKB is now in stock

DDiverzant Will do when its time for the making of the actual order itself, forgot to do it...

nubbins•6/24/24, 5:28 PM

the cable is integrated into the adapter

DiverzantOP•6/24/24, 5:30 PM

what about the stick connector itself?

DDiverzant what about the stick connector itself?

nubbins•6/24/24, 5:30 PM

? the adapter handles that, and the cable comes out of the adapter

nubbins•6/24/24, 5:30 PM

plug it into the blackbox

DiverzantOP•6/24/24, 5:31 PM

Wasnt there something like I need the connector for Gunfighter 2\3?

nubbins•6/24/24, 5:32 PM

DDiverzant Wasnt there something like I need the connector for Gunfighter 2\3?

nubbins•6/24/24, 5:32 PM

as long as you get a rev.b grip if you buy the rev.b adapter, or a rev.c grip if you buy the rev.c adapter

nubbins•6/24/24, 5:34 PM

OH do you have NXT right now? then you'll have to convert that grip or buy one

DiverzantOP•6/24/24, 5:35 PM

Oh okay so I choose which adapter I need. And it goes from the adapter into the blackbox and from there into the PC.

I have none currently, I am using the worst financial decision stick ever (simple simpit)

DDiverzant Oh okay so I choose which adapter I need. And it goes from the adapter into the ...

nubbins•6/24/24, 5:37 PM

yep, definitely get the rev.c one, it is way superior to rev.b

nubbins•6/24/24, 5:37 PM

pair with rev.C/GF4 grips

DiverzantOP•6/24/24, 5:46 PM

Ok, will do so! Honestly I cant wait to get rid of this POS stick I have atm...

Nnubbins Click to see attachment

PiNKSH!T•6/24/24, 6:10 PM

what colour is that m8?

PPiNKSH!T what colour is that m8?

nubbins•6/24/24, 6:14 PM

it is this color, it always comes across weird in pictures
https://www.cerakote.com/shop/cerakote-coating/H-349/aztec-teal

Cerakote - AZTEC TEAL

Shop Cerakote AZTEC TEAL H-349. Find the coating that fits your application. Choose from a wide variety of coatings with specific attributes and specialties.

PiNKSH!T•6/24/24, 6:15 PM

oh did you diy cerakote the grip?

PPiNKSH!T oh did you diy cerakote the grip?

nubbins•6/24/24, 6:19 PM

took it to a gun shop

Nnubbins took it to a gun shop

Old Prospector•6/24/24, 7:37 PM

Nice, I've been interested in doing the same. Has it held up well to your grip? I.e. no erosion.

Old Prospector•6/24/24, 7:45 PM

Maybe I'll do it on my Mongoose as a test.

OOld Prospector Nice, I've been interested in doing the same. Has it held up well to your grip? ...

nubbins•6/24/24, 8:09 PM

it's only been about a month and a bit. But since it's cerakote I have significantly more confidence in it than the factory e-coat that peels on older MCGUs

nubbins•6/24/24, 8:10 PM

can't say how it will be done on T50, as that's not metal and idk how well cerakote works on polymer and what prep is needed

Nnubbins T50 hats look weird compared to MCGU and the real thing

Icebeat•6/24/24, 8:13 PM

all looks the same to me

IIcebeat all looks the same to me

nubbins•6/24/24, 8:19 PM

dunno, virpil's old hats look a lil goofy

nubbins•6/24/24, 8:19 PM

new flankr grip looks amazing

Old Prospector•6/24/24, 8:23 PM

Ya I'm dying for that flnkr

Old Prospector•6/24/24, 8:23 PM

Might get my grip coated just to test the process

Old Prospector•6/24/24, 8:26 PM

Did you do anything to protect the label etching?

OOld Prospector Did you do anything to protect the label etching?

nubbins•6/24/24, 8:35 PM

no, all the labels are gone except for the brake lever/lot code text that i specifically told him to mask off (and even then he ran into difficulties and only preserved part of it)

nubbins•6/24/24, 8:35 PM

https://discord.com/channels/965234441511383080/1145651561578647582/1252736361924919436

Nnubbins no, all the labels are gone except for the brake lever/lot code text that i spec...

Old Prospector•6/24/24, 9:00 PM

Great, thanks. Any other tips on the process?

OOld Prospector Great, thanks. Any other tips on the process?

nubbins•6/24/24, 9:06 PM

i'm trying to think of anything. I don't know how the T50 looks internally so I'm not sure if there's specifics. There was a little bit of concern over fine pitch threads everywhere inside the MCGU (it has a lot of screw posts), but it wasn't a problem.

nubbins•6/24/24, 9:07 PM

Probably the focus will be on how to remove the paint. If that's even necessary for Cerakote on plastic? idk much about painting plastics

Old Prospector•6/24/24, 9:17 PM

Yea, dreading the potential takedown.

Wwalmis can you send me the vpconf file?

Hiob•6/24/24, 9:55 PM

Helicopter_Test.vpconf6.54KB

Hiob•6/24/24, 9:57 PM

@walmis here it is. The first screens is how I set it up. As I said, when tested dry, works like expected. But when loaded with TelemFFB in game (pedal mode static) the curve looks like the last picture (cut off always on the right side). The pedal in this case is limb to the right and stiff to the left.

HHiob @walmis here it is. The first screens is how I set it up. As I said, when tested...

Number481•6/25/24, 12:26 AM

FWIW, if I import your profile (just using configurator), the gain map looks like the cut-off one in your last screenshot. I recreated the gain map you show.. works fine at first in the same configurator session.

Without using TelemFFB... Reload normal profile...Close configurator...open configurator...load center detent profile... looks like the cut-off one again. I think its either a read-issue or a write-issue with configurator.

Apex•6/25/24, 12:31 AM

#1577 with 984 to go. See you guys in 2026

AndyHill•6/25/24, 12:47 AM

984 orders of Rhino on the wall

AApex #1577 with 984 to go. See you guys in 2026 😂

Touch_Of_Legend•6/25/24, 12:52 AM

Folks drop out quite often so it’s never the full wait.

You can ping the bot for the average

TTouch_Of_Legend Folks drop out quite often so it’s never the full wait. You can ping the bot fo...

Apex•6/25/24, 2:26 AM

Is the command just ! Average with no space?

Apex•6/25/24, 2:34 AM

!help

AApex !help

VPforceBot•6/25/24, 2:34 AM

Available commands are:
!status or !stats - get the latest statistics about Rhino production
!info <email>

You can ask me to fetch you your preorder information. You can DM me in private so you won't leak your email address publicly.

otor kit order requests go here - http://order.vpforce.eu
RHINO base preorders here: http://reserve.vpforce.eu

Also don't forget to check out the #

faq channel for more info.

Google Docs

VPforce Order Request

Order request for VPforce products.
Please note: to reserve a VPforce RHINO FFB base, please use reservation form here.

Once the order is ready to be fulfilled an invoice will be sent to the provided email address.

Google Docs

VPforce RHINO Preorder

Enter your details here, so you can enter the waiting queue for the Rhino FFB base.
Once the queue progresses I will get in touch with further details.

Quick FAQ:
The Rhino costs - 800EUR + Shipping (~80EUR to USA/Canada on average, up to 40EUR in EU)
It is compatible with Virpil/Thrustmaster Grips out of the box
WinWing/VKB GFII grips are supp...

Apex•6/25/24, 2:34 AM

!status

AApex !status

VPforceBot•6/25/24, 2:34 AM

Hey @Apex,
So the last Shipped RHINO is #0593 on 2024-06-21
Average waiting time from preorder to shipped is 208 days, median is 210 days, max is 437 days
578 Rhinos are shipped in total

AApex #1577 with 984 to go. See you guys in 2026 😂

DiverzantOP•6/25/24, 6:16 AM

I dropped around 80 places in like 17 days

DDiverzant I dropped around 80 places in like 17 days

Apex•6/25/24, 6:40 AM

Oh wow. So it’s not as long as it seems.

AApex Oh wow. So it’s not as long as it seems.

DiverzantOP•6/25/24, 6:43 AM

6-9 months according to people here that recently got theirs

HHiob Click to see attachment

walmis•6/25/24, 7:42 AM

Thanks, I'll investigate!

VPforceBot•6/25/24, 8:27 AM

:package:

RHINO #0594 Has Shipped!

SSR-F_Winger_[73]_David Hello everyone. Due to time issues and no more free time for me I decided to sel...

SR-F_Winger_[73]_David•6/25/24, 8:57 AM

Hey guys. I tend to overtake myself sometimes with decisions. So I did here. Apologies;)
I will keep offering the kits. Maybe at a reduced pace. Ill let you guys know when a batch will be available.

VPforceBot•6/25/24, 9:23 AM

:package:

RHINO #0595 Has Shipped!

Will do when its time for the making of the actual order itself, forgot to do it on the preorder thi

Similar Threads