Hmm, the raw motor position is interesting. Did the belt slip by any chance, can you check the tensi
Hmm, the raw motor position is interesting. Did the belt slip by any chance, can you check the tension?
WAlso I recommend importing and storing the configuration from 'configs/RHINO-defaults.vpconf'
SI did hit the e-stop in game to try to reset it. It was at that point that it started. The reset worked it out.
SDid it go into some kind of protection mode?
Bnot sure if this is related but there is a suspectged bug with the heatblur f4 where the y axis drops out typically on restarts of airstart instant action...happens to me repeatedly
EYes. Everything you said checks out. Mine is not the black one, but regular one. I can't remember which profile I ended up using. It was between generic grip and cm2. I think the cm2 would read the pinky axis but as different button presses, rather than an axis.
EI'd appreciate if someone can help me with this. It is driving me crazy, and it is a shame I can't use telemffb effets half the time or more.
TFor sure I understand your frustration and I would jump right on so we could compare screens since we’re using the same grip (minus some color change) but I’m away from home this weekend.
I know someone out there can help so hopefully they will pop up sooner than later!
If not try the CM2 profile and click that “calibrate axis”
It shows as random buttons until you assign the pinky axis.
The button is on the main page around the middle or so.. with I could help more.
I know someone out there can help so hopefully they will pop up sooner than later!
If not try the CM2 profile and click that “calibrate axis”
It shows as random buttons until you assign the pinky axis.
The button is on the main page around the middle or so.. with I could help more.
NThe error is on DCSs part, not the export script. DCS is failing to return any data for a basic call to the "get engine info" API call. Why is anybodys guess. Could be a mod interfering, could be another export script (SRS, SSA, etc), could be corrupted game files. That error message is more of a symptom than the actual cause though. There may be something in the full dcs log that would indicate what the actual issue is.
In terms of troubleshooting steps I would suggest:
In terms of troubleshooting steps I would suggest:
- Rename your Save Games folder. DCS will create a new clean one when it next starts up. You'd then want to copy the config and inputs from the old save games folder to the new one.
- Re-start TelemFFB. It will insert itself into the fresh export.lua and copy its export script into the new save games directory.
- Don't re-setup any other utilities that add their own export script setup to DCS.
- Remove all 3rd party mods
- Slow repair DCS
DHey, my Winwing joysticks are not working atm, does anyone else have this issue atm?
DI have plugged the WW grips into my WW base and all works perfectly fine and I tried the VIRPIL grips on my Rhino base and all is working fine
Dbut for some reason my WW grips wont work on my Rhino
DI have 2 x WW adapters and I have tested them both.. so I am not sure if suddenly both adapters are now dead, or there is something else that is preventing them from working
D
Pdo you use any extension? I found the virpil extension is a bit finicky. I tried plugging the grip into adapter then straight into base & that worked
DI normally do, but I just tried without it
DI'll try again another tiem
S@walmis is there a way to see if my winwin adapter is working properly? i suddenly dont get stick inputs anymore but the stick is still working (it works in my winwing base) so i wanna see if its the adapter or the rhino itself
DI’m having same issue
SDid you check to confirm that the WW grip is selected in the Configurator? If you load another profile it may have deselected it.
Snothing changed to the software and yes i checked
SSorry I'm realizing I'm acting like this guy 
Sits okay do the same thing when trying to help people with DCS problems dont know you so you could do the most basic mistake
SProblem is still occuring. I loaded the RHINO-defaults.vpconf and it's not recognizing the Y axis movment and providing this force.
SI reset the device and it's fine
BI lose both axis if I run Sim Racing Studio software. It apparently intercepts the telemetry and doesn't share it. Do you have stuff running?
SSo everytime I use it, I need to do some kind of reset on it. What is the best way to shut her down if I'm also removing USB power? I've been doing the estop first then remove USB power. Could that be causing this?
BI just disconnect the pit hub and and the rhino psu.
I don't beef around with the e stop.
I don't beef around with the e stop.
(I also us sim racing studio to run my motion setup and when I first got it , it screwed with my racing wheel which ran on simhub , it’s to do with the polling of the com port and either on si m racing studio or simhub ther was a setting to disable polling on particular ports that fixed my issue. Not at PC just now but will try and look later today for actual setting
BAnyone having issues with Xplane 11 ??
FI just e stop and don't bother with anything else.
your y axis motor seems to be working a lot being 22°C hotter than the x. something is going on with your Rhino.
your y axis motor seems to be working a lot being 22°C hotter than the x. something is going on with your Rhino.
WI think somehow the axis position is on the edge of encoder wraparound and it starts in the wrong angle. It's an easy fix, by readjusting the belt.
Basically slip off the Y axis belt, turn the motor pulley so the
Then run the auto calibrate on both axes. Final calibration values should stay within 0 .. 4096 range.
Basically slip off the Y axis belt, turn the motor pulley so the
raw_yThen run the auto calibrate on both axes. Final calibration values should stay within 0 .. 4096 range.
SOk. Thanks. I'll do that
MJust doing some PC housekeeping and found a folder in app data for Telem FFB that was 170GB
....log files.....why is this and is there a setting somewhere to disable this?
....log files.....why is this and is there a setting somewhere to disable this?
H@walmis Is there a way to have VP telemetry (raw position, temperature etc.) as an "always on top" window? While running DCS?
HI can't figure it out....
HWhat I found helpful to center the motor for mounting the belt is, deactivate all effects but spring. Set it to 50% by 50% by 100% mastergain and manually enter 0 and 4096 as calibration values, before attaching the belt. That will keep the motor nicely centered while attaching the belt and it can't move by mistake. After that you need to do a proper calibration of course.
Fdang. you must be flying a lot. mine is 6 MB.
SThanks for the help. I'll let you know how this works going forward.
And thanks @Hiob, took your advice into account as well
And thanks @Hiob, took your advice into account as well
NLog pruning in system settings
Sokay it does seem like the WW adapter or the connector on the rhino is broken: i tried attaching my F-16EX again and still no buttons show up and since i dont have a TM/virpil grip available i cant test if its the rhino or the adapter...
WIf you enable the "Generic grip Debug" grip profile, what data does it show in the Debug tab?
SWith or without the F-16EX grip attached?
WYou can try without
S
WYeah, looks like it's either dead or not making contact
Spretty sure its making good contact i can feel it going into the socket
WDrop me an order form request, I'll send you a replacement.
Sdone
H@walmis I got a question I couldn't answer - the motor drivers are built in the bottom of the motors, correct? Are they thermally connected to the metal cover plate? And what exactly does the temperature read-out in the control software refer to? TY
WYes, the transistors are dissipating into the motor case. The temperature readout is measuring average temperature of the motor case / transistors.