What sim? Ima reckon it could be MSFS and maybe you have the wrong types of axis bound?
What sim? Ima reckon it could be MSFS and maybe you have the wrong types of axis bound?
S@walmis good news adapter arrived and the rhino isnt just producing F's (in chat)
Sthere should be no axes bound in msfs. it all comes from telemffb
ABut maybe something is bound tho, by default and causing the issue?
Syes could be.. luckily the rhino isnt one of those common sticks that just auto-configure themselves
S
rhino has been fixed and is working again 
SHi All, hoping someone can help me.. Telem FFB is not connecting to any sim. For the life of me I can't figure out what may have changed: attached is the log
message.txt4.04KB
HHave you checked in the VP configurator if your Stick has a valid profile loaded? Do you have set any „load on startup“ profile in Telem that you subsequently removed?
HTrying to make sense of the log, but not really in to deep….
SIt does have a valid profile loaded, but it cant find the LUA script for DCS even though it's in the right place. I disabled MSFS and Xplane support and don't get the Unable to connect to simconnect any more. But it still can't find the DCS telemetry. Here's more log file with some strange errors:
message.txt2.52KB
HHave you tried to delete the export.lua and let it install a new one?
ORight I’ve got it sorted out .
The only problem is the stick doesn’t return on the screen when the actual stick has.
So if I bank over and then gently push the opposite way, it’s not smooth and sticks in that position on screen.
Absolutely nothing like real flying.
Any ideas ?
The only problem is the stick doesn’t return on the screen when the actual stick has.
So if I bank over and then gently push the opposite way, it’s not smooth and sticks in that position on screen.
Absolutely nothing like real flying.
Any ideas ?
HSounds like a controls binding issue in your sim. Double bindings perhaps?
OShould I delete the button configuration I’ve chosen ?
Is that what you mean.
Is that what you mean.
HI can‘t help you in detail, since you are using a different sim than I do. But I would start with checking the axis bindings or anything related to pitch and roll. Delete any binding you don’t intend to use.
JI bought a motor for pedals and I've connected the usb and communications line from the motor to the controller card and plugged in power and usb. I'm connected based on the message at the bottom of the screen, but I dont see any position information coming from the motor. I must be missing something...any ideas?
J
OI’m using msfs 2020, I’ll have a look tomorrow after work.
Thanks.
Thanks.
Sdisable Y axis
S
Jlike magic:) thank you
P
Pit is not center aligned what can I do ?
HI think most people use some kind of extension, which in most cases can be rotated freely. Also with a center stick you usually want the grip in an angle towards your right hand to have an ergonomic wrist position. Of course I can’t tell how it works out for your needs, The only solution I can suggest is some kind of extension.
POkay. is it normal? or mis printed?
Pi think is too much off centered
Pif all guys have like this, I am okay.
KYes, this is correct angle for a center mount.
DOn my Rhino, it's the same as yours. But you can turn your stick to suit your needs. In any case, validated with my Virpil Alpha.
PThanks
P
Pwhich side do I need to mount motor?
Pis it right?
WThat should be the pitch motor
Pi got it thanks
Pdirection is right?
Psticker on top
P
Pmotor 1 is roll, 2 is pitch?
DTurn your gymbal 180
Pwhy?
PI already fixed all cant do that
HThe gimbal arm sides with the nuts in them must be on the faces with the motors and the cable outlet should face towards where the PCB is mounted.
Pgot it.
P
Pit is so hard, is it correct side?
Pok I will fix them all again
Pbecause it is actually 180 turn
TYep I have some pics that show but you must be careful with the orientation of the slot in the gimbal
You’ll get it the best part of DIY is that it doesn’t matter if it goes wrong you just take it apart and fix it.
DIY is forever basically because when you build it… you can rebuild it!
You’ll get it the best part of DIY is that it doesn’t matter if it goes wrong you just take it apart and fix it.
DIY is forever basically because when you build it… you can rebuild it!
T
TYep this is correct you can see in the pic above the correct orientation and yep this is correct how you said it.