Yeah, I can't think of anything else than UUID getting changed each time. Why it's happening though,
Yeah, I can't think of anything else than UUID getting changed each time. Why it's happening though, I have no clue
RIt's a good suggestion.
RI have my BIOS set to disconnect USB power every time my PC enters S4/S5 state, but that affects all my USB devices not just the Rhino. Perhaps somehow this confuses Windows?
VIt might be, never played with that option.
RI only have that enabled because I have a pre-amplifier that I use as external sound card, which has an OLED display that stays on if there is power, and I want to prevent burn-in.
TI was having a similar thing and rather than use the BIOS I went into device manager and under each USB device properties/power management tab unchecked “allow this device to wake”. This turned my USBs off while the PC was off. You could try this as an alternate.
RIn that case you’d also need to use the kill switch more often on the Rhino, wouldn’t you? Is there a downside to that?
TI don’t think so, I believe it is the recommended method to turn off power when not in use.
TSince the power supply isn’t switched, the E-stop is the only switch
HHi Everyone, I have a Rhino and love it! I'm selling my Brunner CLS-E FFB Joystick for like 700USD plus shipping in USA only. I made a youtube of it showing that it works. Shoot me a DM if you are interested.
EHow can I get rid of this icon? Pressing the cross does nothing. It doesnt respond to anything I do. This ain't the first time this has happened.
EDisconnecting Rhino doesnt help either
EKilling edge process doesnt do anything
Athere's a task called like Widgets in the task manager that killing it will remove it
Ai made a post a while back how to permanently get rid of the edge version of this, since it doesn't seem to respect the advanced setting: https://canary.discord.com/channels/965234441511383080/965234441511383083/1259226124731416617
A(i've been running that fix for a few months now and it's never re-appeared, and i've had no ill side effects of killing that process from ever running)
Ajust a reply bump in case ^
Si booted up War Thunder again and thought i could do some sim flight but for some reason WT doesnt recognize any button inputs from my WinWing F-16EX grip any ideas how/if this can be fixed? (rhino+WW adapter+WW F-16EX Grip+Griptype is WinWing Adapter)
LDo the buttons show up in Windows?
Syes
SWT does recognize the axes just no buttons so it seems to see the rhino but not anything through the adapter?
LWhat about here?
Sthe rhino/grip are working normaly (at least in DCS and MSFS) just everything that isnt an axis isnt getting recognized
NIf you can see the buttons activating in configurator when you press them, there is no reason why WT wouldn't. Unless it has some sort of "too many usb devices" issue like IL2 does.
Slooks at all the MFD frames might be? but shouldnt axis also not work then?
Shm mfd frames dont get any response also 1 sec ima disconnect everything except stick throttle rudder
LToo many controllers is the only thing that comes to my mind rn 
Sokay yeah was to many controllers
Sman how can modern games have limitations like that >.<
Sthe age of joysticks with like 2 buttons is long over
![[OR] SerGeant](https://cdn.discordapp.com/avatars/290181622832168961/338cff3e564800fa5a1068e9c25e28f5.webp?size=40)
[I have a huge problem with my newly built Pedals.
When both are plugged in, I have no spring force in the Stick in DCS.
When the pedals are unplugged and connected after DCS has started, it works fine.
I read some guys had the same problem, but there was not solution provided.
When starting DCS, I got „all effects reset“ in the debugging window, but the spring never comes alive in the aircraft.
When both are plugged in, I have no spring force in the Stick in DCS.
When the pedals are unplugged and connected after DCS has started, it works fine.
I read some guys had the same problem, but there was not solution provided.
When starting DCS, I got „all effects reset“ in the debugging window, but the spring never comes alive in the aircraft.
![[OR] SerGeant](https://cdn.discordapp.com/avatars/290181622832168961/338cff3e564800fa5a1068e9c25e28f5.webp?size=16)
[I did not install it manually. Maybe an application did it automatically. I think winwing is doing so. Will have a look tomorrow.
TI have spring and damper setup but the damping of the spring "bounce" at the center in the X axis is more pronounced than the Y. In other words, when you deflect and release in the Y, it's perfectly damped to spring back to center and stop. When released in X, it bounces in the center 5-6 times before coming to full rest. Any suggestions?
[Hey there! I know this behavior. Have I the same way. It’s more present on higher gains.
Mine does not bounce so often but you see a difference to the x-axis.
Mine does not bounce so often but you see a difference to the x-axis.
HNo, unless you have a switched power supply or outlet, you should turn off the Rhino with the e-stop.
[so deinstalling vjoy did make no difference.
DCS is only giving out data to the pedals.
DCS is only giving out data to the pedals.
HHave you checked the IDs you gave to the devices? Are they different?
[Stick 2055, Pedals 2054
[Ok, I got it working. Export script in DCS is causing the issue.
With only TelemFFB an SimShaker it works.
Seems like SimHaptic is causing a conflict.
With only TelemFFB an SimShaker it works.
Seems like SimHaptic is causing a conflict.
WJust received my Rhino this week and love it so far. I am having an issue with getting the F-18 autopilot and the Rhino to play nice with each other. Any solutions? I've searched here but didn't find anything addressing it. Thanks.
WSorry, forgot to mention it's for DCS
Update: Figured out the problem. Deselected spring force.
Update: Figured out the problem. Deselected spring force.
EHi guys. I am experiencing some issues with the estop switch. It seems to be loose and causes ffb disconnection now and then. Any suggestions to fix it? Are there any instructions to dismantle the Rhino to fix the e stop switch correctly?
FThe TelemFFB app is now always opening off right side of the screen (I can see a fast animation of the window zooming to the right). I’ve reinstalled it, but it doesn’t help. I’ve tried changing resolution but it doesn’t help. I can’t access its window for obvious reasons. Any ideas?
NFor now, you can delete the saved window location key from the registry. Next version will prevent the window placing itself on a 2nd screen x,y if that screen is no longer connected. https://discord.com/channels/965234441511383080/1230919462144835674/1269309404474249366
NCan someone explain to me the button mapping in the FFB Configurator? When I go to set keybinds in the simulator, some buttons aren't registering and some are registering the same button for different buttons (a 5 way hat will register the same button for two different directions)
BI’m having issues getting DCS to recognize the vkb gunfighter mcg ultimate and the rhino. Any help would be greatly appreciated
LHi! What seems to be the problem? Does MCGU show up in Windows game controllers? Do you use Loopback grip type in VPforce configurator? Is your blackbox blinking?
LWhat about Windows?
LOk the grip should been seen in DCS too. What do you get in DCS? Rhino and MCGU or just one of them - or neither?
LI forgot to ask : does your Rhino+MCGU work in any other sim?