The original position is probably tricky to find out at this time, unless Walmis kept records of tha

The original position is probably tricky to find out at this time, unless Walmis kept records of that.

For a rough indicator, you can have a look at this: https://discord.com/channels/965234441511383080/1122080764163522571/1265701326478643322

SSolaceOneTwo howdy everyone, had a look around but I cant find anything. I'd like to run my ...

�

𝔐𝔬𝔯𝔭𝔥𝔦𝔫𝔢 💀•8/9/24, 3:26 PM

You can even turn it just 90 degrees so the cables come out the side... then you just Swap the axes.

Reed•8/9/24, 4:49 PM

47 may be released today.

RReed 47 may be released today.

142nd_Bama•8/9/24, 5:07 PM

They sure are dragging out the patch….

Reed•8/9/24, 5:17 PM

Yup of course. I wouldn’t be surprised if it didn’t drop today

142nd_Bama•8/9/24, 5:25 PM

So far newy saying today

AndyHill•8/9/24, 5:30 PM

friday dump & run after a massive last minute crunch sounds like a recipe for success

AlighierianOP•8/9/24, 5:41 PM

I see no way that could possibly go wrong.

"Btw, 2-week company holiday starting next week."

Reed•8/9/24, 5:44 PM

What holiday

AlighierianOP•8/9/24, 5:45 PM

just a general dig at that kind of dump&run.

Bonus points if a dev does it prior to new year's seasonal holidays, so 'people can enjoy the new patch'

AAndyHill friday dump & run after a massive last minute crunch sounds like a recipe for su...

Bob Bushman•8/9/24, 5:51 PM

Welcome, you must be new.

BBob Bushman What subpages? its straight to the order form.

Austringer•8/9/24, 7:48 PM

There is a home page and the order form is a sub page of the main page.

Austringer•8/9/24, 7:50 PM

Vpforcecontrols.com being the main page.

Austringer•8/9/24, 7:50 PM

Either way it appears to be fixed now

RRoboGeoff Does the force feedback trim in the F-14 interfere with the autopilot? I feel li...

Jaeger•8/9/24, 8:07 PM

Nope, all fine in that department. Things go wonky if you go into back seat and then back to front, but if you stay in the front, everything except ACLS (HB bug) works fine FFB wise.

AAlighierian The original position is probably tricky to find out at this time, unless Walmis...

goobernoodles•8/9/24, 9:55 PM

Thanks - that was helpful

RoboGeoff•8/10/24, 3:27 AM

oh. THere's FFB trim box I think you need to check in the F-14 special tab

bert•8/10/24, 6:19 AM

Anyone here who tried the DCS Chinnook yet? Trying to set up controls right now, but i'm not getting any spring forces.

Scarlet•8/10/24, 6:35 AM

from what I've seen, there is no FFB support yet

SScarlet from what I've seen, there is no FFB support yet

bert•8/10/24, 7:36 AM

Can't wait to have it added in a few years then lol

SScarlet from what I've seen, there is no FFB support yet

Caprice•8/10/24, 8:20 AM

Just to clarify you mean there is no FFB support in DCS?

CCaprice Just to clarify you mean there is no FFB support in DCS?

Dracks•8/10/24, 8:27 AM

For the Chinnook. Other modules in DCS have FFB support (if I understand your question)

Bbert Anyone here who tried the DCS Chinnook yet? Trying to set up controls right now,...

LeLv30_Superbus•8/10/24, 8:32 AM

Setting up controls rn... "cool I have 3 extra hats in my cyclic grip"

... (glances left in the cockpit) there are SEVEN hats in Hook's ~~collective~~ thrust lever and there's another grip with even more hats next to it

"I need a new collective

or two

LeLv30_Superbus•8/10/24, 8:35 AM

TelemFFB has basic support whatever it means, I'll test spring forces now

TrigaNZ•8/10/24, 8:39 AM

Using the trim button doubles the trim asked for instead of holding current position.

TTrigaNZ Using the trim button doubles the trim asked for instead of holding current posi...

LeLv30_Superbus•8/10/24, 9:14 AM

So you're getting a centering force? I couldn't figure it out yet.

LLeLv30_Superbus So you're getting a centering force? I couldn't figure it out yet.

TrigaNZ•8/10/24, 9:21 AM

A bit, not as much as other choppers. The trim doubling is annoying.

Reed•8/10/24, 10:29 AM

I am barly getting any centering force and the double trim is crap.

RReed I am barly getting any centering force and the double trim is crap.

slowmover•8/10/24, 10:43 AM

I think double trim is a problem with cyclic that trim and goes to center position.

Number481•8/10/24, 11:26 AM

The only way is to not bind the trim button in the game (it only understands sprung joystick logic) and then use either the hardware trim in configurator or, if you are using it, the hardware trim in TelemFFB.

If you have the trim button bound in the game it will double the inputs since it expects the joystick to be sprung and thinks you are going to let the stick go back to center after you have pushed the trim button.

SamNFTY•8/10/24, 2:02 PM

Enjoy your vacation!

NNumber481 The only way is to *not* bind the trim button in the game (it only understands s...

Reed•8/10/24, 5:10 PM

Yup. I’ll use override trim for now

Stryker990•8/10/24, 5:44 PM

Okay im honestly confus: what do i need on and what off to get a working trim release in telem for the hook right now?

Stryker990•8/10/24, 5:47 PM

It currently works as having no spring would like to have spring force and using the trim release to force trim

SStryker990 Okay im honestly confus: what do i need on and what off to get a working trim re...

Number481•8/10/24, 5:49 PM

Delete the trim binding in the game... that will only work for sprung joysticks that always return to center as you've seen (regardless of the trim mode you select in its special settings).

If you're using TelemFFB, enable the Override Spring and the Hardware force trim options. Then bind your button for Trim Release (and optionally, Trim reset +hats).

Stryker990•8/10/24, 5:49 PM

Oooh the Override has a subsection didnt even know that :MurmKek:

Stryker990•8/10/24, 5:50 PM

Thx

NNumber481 Delete the trim binding in the game... that will only work for sprung joysticks...

Stryker990•8/10/24, 5:55 PM

hm do you know how to make the trim up/down/left/right in telem recognise my trim switch (got a WW F-16EX) and it seems to only recognise buttons but not the 8way hat....

SStryker990 hm do you know how to make the trim up/down/left/right in telem recognise my tri...

Number481•8/10/24, 5:58 PM

I think it will only work if you have "hats as buttons" enabled in configurator.

NNumber481 I think it will only work if you have "hats as buttons" enabled in configurator.

Stryker990•8/10/24, 5:59 PM

:grizzlyFacepalm: tried to but forgot to hit apply in the software now it works thx

NNumber481 I think it will only work if you have "hats as buttons" enabled in configurator.

amadeus•8/10/24, 6:10 PM

Would it be hard to have it work with pov hats?

amadeus•8/10/24, 6:10 PM

Would prefer not to rebind a bunch of stuff

Fr4Ged•8/10/24, 6:11 PM

so the DCS Chinook currently does not support force feedback then?

amadeus•8/10/24, 6:11 PM

Correct, all has to be done via telemffb

amadeus•8/10/24, 6:12 PM

(Or the configurator I guess, but that’s not the preferred way)

Fr4Ged•8/10/24, 6:12 PM

that is kind of lame for it being an ED module

Aamadeus Would it be hard to have it work with pov hats?

Number481•8/10/24, 6:13 PM

Would be a q for walmis. As it stands currently, doesn’t look like the pov hats come through in the input report we get from the api in TelemFFB.

FFr4Ged that is kind of lame for it being an ED module

amadeus•8/10/24, 6:16 PM

It is early access, and there’s a lot to do, I’m sure it’ll be added at some point

witcohe•8/10/24, 6:22 PM

Have a question about the Configurator "Store Setting" button. After adjusting the various effects to my liking, I then click the "Apply Settings" button and then the "Store Settings" button. Should those settings survive a power down of the stick. If so, mine doesn't seem to be doing that. It is always comes back up with the "factory" settings after a power up.

UPDATE: I did some more testing and it seems that powering down the Rhino (using the power disconnect button) and then restarting my pc, restoring power to the stick and the starting the configurator keeps the last loaded settings. However, when I started my pc and stick after them being powered off overnight, it returned to default settings.

Reed•8/10/24, 6:41 PM

Where is latest default config. Getting really bad reverberation with ch47 and my stick is going crazy and erroring out. Resetting doesn’t work with button or motor reset. Belt tension is good. It’s definitely something to do with the spring hz setting and natural dampening compensation.

Reed•8/10/24, 6:41 PM

Very frustrating. I want to start from scratch to see if it fixes it

The original position is probably tricky to find out at this time, unless Walmis kept records of tha

Similar Threads