hmm. mabe AMD driver for linux is not really friendly with USB-C on the card for whater reason?
hmm. mabe AMD driver for linux is not really friendly with USB-C on the card for whater reason?
KYeah I have no idea. I don't have those issues whatsoever though I've never run my eGPU without an external display.
KTry an HDMI display, see if it works better
KI would more wager that game scope is not built for what you're trying to do
Mdo you mind to check performance with eGPU but on legion go display?
Kor Displayport
KAnd the chance of a fix for that is basically zero
KIt expects the display to be directly connected to the graphics card it's running on
KMy 7600XT is in my desktop being used for ROCm at the moment, sorry
KI can do it on the weekend but I'd advise you try a HDMI or DP monitor first.
Mif my setup is the problem then the fix will be with AMD drivers. (one day)
I will try somehow to hookup monitor over DP
I will try somehow to hookup monitor over DP
KI don't believe the drivers have anything to do with the problem you're having
KLike I said it's most likely down to Gamescope
KAnd the chance of that ever being fixed is basically zero
KIts usually a 10-15% performance loss to use internal display over external based on my past experiences
KDepending on RAM speed, it can definitely get even slower
KI've used eGPU on 3 laptops and a legion go so far.
KFrame buffer copy cost is a bitch
Mwhat is gamescope exactly?
KOh? oof.
KIt's what powers game mode
KI am also running in Desktop mode FWIW @MrHorda
Mdoes gamescope has anything to do in Desktop mode too?
Knot Game Mode
MI have the same issue in desktop mode
KOk then
Zanyone know of a good tool to keep two home directory s from bazzite in sync?
tried chezmoi but thats only good for simple conf files that are small in size (so no themes or binary data)
tried chezmoi but thats only good for simple conf files that are small in size (so no themes or binary data)
Mby the way
MI've noticed my eGPU fans are not spinning (spinning very slow) when games run. is it possible i just have some weird fan control issues on my card? is there a way to run the fans on max? so I could check the theory.
Mi was thinking maybe card is just throttling because fans are not spinning fast enough?
Klet's plug a display into the GPU before we go down this route
Mok. will do it right now. will be back in 10-15 minutes
ZProbably syncthing
KAlso when you have it hooked up, open terminal and do
boltctl list and let me know the output.
CResilio sync is an alternative to sync thing that I prefer, there are also just scripts to install it
Zwhats the difference? i personaly have used syncthing for syncing emulator saves and things like that never tried syncing my whole home folder (thinking about it that might be a bad idea even if I am using the same DE and distro on both systems...)
M● Razer Core X
├─ type: peripheral
├─ name: Core X
├─ vendor: Razer
├─ uuid: c8010000-0070-6718-2397-b1840622c801
├─ generation: Thunderbolt 3
├─ status: authorized
│ ├─ domain: 02343804-c12e-b039-ffff-ffffffffffff
│ ├─ rx speed: 40 Gb/s = 2 lanes * 20 Gb/s
│ ├─ tx speed: 40 Gb/s = 2 lanes * 20 Gb/s
│ └─ authflags: none
├─ authorized: Wed Aug 14 21:18:09 2024
├─ connected: Wed Aug 14 21:18:09 2024
└─ stored: Wed Aug 14 16:53:25 2024
├─ policy: iommu
└─ key: no
├─ type: peripheral
├─ name: Core X
├─ vendor: Razer
├─ uuid: c8010000-0070-6718-2397-b1840622c801
├─ generation: Thunderbolt 3
├─ status: authorized
│ ├─ domain: 02343804-c12e-b039-ffff-ffffffffffff
│ ├─ rx speed: 40 Gb/s = 2 lanes * 20 Gb/s
│ ├─ tx speed: 40 Gb/s = 2 lanes * 20 Gb/s
│ └─ authflags: none
├─ authorized: Wed Aug 14 21:18:09 2024
├─ connected: Wed Aug 14 21:18:09 2024
└─ stored: Wed Aug 14 16:53:25 2024
├─ policy: iommu
└─ key: no
CResilio sync has selective sync so you can choose what each client downloads. I also find it simpler than sync thing but they are pretty comparable
KOkay yeah should be working.
Mstarting a game from desktop mode
K
Zoh that achtually sounds cool the selective sync i mean
CI use the selective sync to pull specific comics from my library to a tablet for reading and it works well
LOh nice. I use the komga docker container to host a comic book server and connect to it remotely via tailscale.
K@MrHorda so any luck?
Msorry. all hanged. blck screens and etc
Mso it is the same story
Mlegion go --> tb3/4 cable --> razer core x + rx 7900gre --> external display over DP cable. no luck terrible performance.
Eis there acceleration applied to a controller when you first plug it in?
Elike the stick/pad
Mi really think fans are not spinning when they should
