sorry i mean NOT bound in MSFS. But TelemFFB keep the info for your next flight
sorry i mean NOT bound in MSFS. But TelemFFB keep the info for your next flight
DThanks again
NNo, don't bind them in MSFS.. it will conflict with what TelemFFB sends and your controls will flutter all over the place. You can set the default for MSFS to "control axes" in the global/offline editor. Then you will not have to enable on each specific aircraft... Easier to record a clip than describe the individual clicks :)...
DThanks makes sense, awesome! I had it like that for one plane but then I tried a different one , that’s when controls didn’t work. So I’ll do the global setting next
Dsorry i mean NOT bound in MSFS. But TelemFFB keep the info for your next flight
RWow. I'm really surprised at the Hz/frequency that the motors are capable of
RI didn't expect them to mimic haptic feedback for different effects. Very awesome
FThe FFB config seems to forget the settings every time I use it. Periodic effects are at 100%, so I set it to 30%, save it, store it, close it, restart the computer and FFB config - and there we got: 100% on the periodic. What do I miss?
LChange the file it loads by default in the TelemFFB app settings page
FI am not loading any file?
PRe the grip/winwing adapter all FFFFFF's in the debug window means the stick is not being picked up yeah?
PI'm really starting to loath this ww adapter
Pwell that might not be bad but it can't be good, the pcb is twisted
Tcan i use my VKB Gunfighter stick as is with the VKB software while using the Rhino base?
THow plug and play is the VP base? I fly IL2 Great battles DCS and Warthunder is there going to be alot of setup time involved in these games or am I going to be able to enjoy the Rhino with little time and effort?
CYes you just need the adapter and it works as normal. The VP base takes a little setup to get right, so more than just a true plug and play. But I found it more intuitive than the VKB software. You can tune it exactly to your like, so if you can use VKB software it shouldnt be an issue to use the rhino.
Telemffb is worth installing as it provides more and better effects than IL2 and DCS provide natively. Once you have it all set up, it is an experience like no other.
Telemffb is worth installing as it provides more and better effects than IL2 and DCS provide natively. Once you have it all set up, it is an experience like no other.
CAlso I would worry about the loop back software for the VKB grip. I saw it on the manual the first time I set it up. I have never needed it.
TI'm not sure if i need or want the thow limiter that walmis offers? I currently use the VKB gunfighter with MCG grip that has the 8inch extension I'm very happy with the throw amount that I currently have with the gunfighter I'm not sure what distance that is though so does anyone have any advice?
TI think I will be using the 8inch extension I have witht he Rhino so I dunno if I need throw limited or not
Fyou can get a limiter afterwards or just limit the throw via software afterwards
DI have a 10cm extension and I limit via the soft (configurator)
Tthanks guys I just ordered it its only 5 euros I basicallu just checked everything on the list lol
Tsorry guys one more question do I need the purchase the upgrade machined aluminum grip mount? is it necessary to have the metal for larger extensions or is this just something people wanted to make them feel better?
TI only asking all this now cause my number came up and I'm ordering now
NDepends on how ham-fisted you are.. 
I joke.. but a few people have accidentally cross threaded their grips/extensions onto the default 3d printed adapter.
I and most other users have never had a problem. That said, if it had been an option when I ordered SN#85.. I would have, because... why not.
I joke.. but a few people have accidentally cross threaded their grips/extensions onto the default 3d printed adapter. I and most other users have never had a problem. That said, if it had been an option when I ordered SN#85.. I would have, because... why not.
TI changed my order like 4 time snow...
Tis that a problem?
Tliterally keep adding EVERYTHING
TI think I have added it all now no more that I can add
Thopefully it is not sending it each time i changed it
BI did just that, but printed a new one the day before my alu replacement showed up, still haven't mounted that.
The reason I mangled mine was trying to tweak my z extension slipping, not seeing how it actually had grub screws to fix that.
And I kept trying to mount it while sitting in the pit, with the thing between my legs and the extension still having the grip on.
If you take the rhino out and do this on the work bench or kitchen etc this would not be an issue.
That doesn't hurt to have aluminium one either.
The reason I mangled mine was trying to tweak my z extension slipping, not seeing how it actually had grub screws to fix that.
And I kept trying to mount it while sitting in the pit, with the thing between my legs and the extension still having the grip on.
If you take the rhino out and do this on the work bench or kitchen etc this would not be an issue.
That doesn't hurt to have aluminium one either.
FI'd say get the aluminium adapter if you change grips a lot. else it isn't really a necessity.
BI'm still having connection issues with DCS. It has worked a few times but then it won't work for a week. The computer sees the base, its powered on but i don't see it listed in DCS and have no control. Does anyone have any ideas?
N
Bconnected
Band the controller moves the dot and the buttons work
Bi also see an ok next to rhino in game controller
Bso it seems to have something to do with my winwing gear
Bwhen i restart the computer, with only the winwing throttle and rudder pedals on a powered usb hub and the rhino plugged into the motherboard dcs recognizes it and it works. Once i attempt to connect the other powered usb with the mip the rhino stops working and i have no ac control. I need to disconnect the mip and restart the computer again to get it to work
Ball the winwing gear is up to date
Nhmm.. sounds like some low level usb bus shenanegans on your motherboard.. well outside my area of knowledge. Only help I can offer, and its not much help at all, is to ensure your MB's usb drivers are updated. Maybe try to figure out how your USB ports are split across busses and test with the hub(s) and/or the rhino on different ones.
Bok i'll try that thanks
THello! Your autopilot wouldn't work unless you Unboxed "Spring Force"?
KIn the past I had a lot of strange problems with different usb hubs.
Then I decided to attach all things directly to my mainboard and a 5port USB3.1 internal card.
All problems wend away.
Not all usb hubs are evil. But every time some has strange problems with devices, I ask them to try without usb hub and most of the time it was the root cause.
Then I decided to attach all things directly to my mainboard and a 5port USB3.1 internal card.
All problems wend away.
Not all usb hubs are evil. But every time some has strange problems with devices, I ask them to try without usb hub and most of the time it was the root cause.
TIt’s also the case that some devices when plugged into a USB hub (together) do best when using a “Powered Hub”.
Lots of those issues I’ve found that come up with most controller types are fixed with the powered hub.
So that’s also a thing you can try
Lots of those issues I’ve found that come up with most controller types are fixed with the powered hub.
So that’s also a thing you can try
Lim probably being thick and need to do something simple , in dcs in the chinook does it have the trim release before moving the stick ie it then holds the stick in place, i have set the stick to no springs ffb in settings is there a binding im missing for it?
N
RThere are 2 different binds for trim in chinook. The trim release bind and the cd AFCs release bind. I went ahead and bound the AFCs release as it doesn’t do anything right now. I use teleffb override trim for chinook and added some damper and friction until they get it sorted. Using the actual ingame trim release causes double movement of the center after releasing the button so not ideal.
RI can’t remember the actual name of the other AFCs release.
Lthe telffb is great im inpressed with that but i still havent figured out how to set a force trim in the tffb
NSee that screenshot that is linked directly in the forum post link I sent. You need to enable the override spring option and then set up the hardware trim bindings.