Is there anywhere that explains the differences between the DIY FFB motor options?
Is there anywhere that explains the differences between the DIY FFB motor options?
HThere is really only two options that are relevant. The "standard" option for the regular (DIY)-Rhino are the 57BLF03. If you want a significant upgrade in max. force over them, you want the 86BLF04. However they don't fit the regular Rhino or DIY-Kits. There are DIY plans that will fit the bigger motors (they are physically much bigger). Makes it all more expensice though.
EAwesome, thank you. Do you know if it is possible to use Simhub or SimTools instead of the VPForce Configurator?
CWhy would you want too? And I believe the answer is no, not without serious modding
WThanks for making the VKB adapter. Works great!
TWhere? 
Hsearch for jabbers moza on youtube
HIt‘s a decent review (for someone that isn’t too deep in the matter imho). The „stress test“ isn‘t really stressing anything though
TThanks 
DJabbers definitely makes quality content, well worth a sub. He had a hell of a time getting the MOZA AB9 base to function early on, and gave them lots of valuable feedback over several iterations. Yet no punches were pulled in his public reporting of many uncomfortable realities either. OTOH, MOZA themselves are terrible at community management / communications. That's why I ended up building a Rhino instead of buying a MOZA, actually. The owner and the community here are so much better, far more helpful and trustworthy.
ESimhub or Simtools would provide a lot more flexibility if you wanted to code your own equations to control the feedback.
CSeems like if you really want that kind of control, you could speak to the dev team here for Telemffb And see if you can help or get access. Otherwise just build your own system from scratch.
EUnderstood. Thank you.
ADoes anyone know if the Virpil 10cm extender is suitable with Rhino?
https://virpil-controls.eu/vpc-flightstick-extension.html
https://virpil-controls.eu/vpc-flightstick-extension.html
Features
★ Available in 50mm/75mm/100mm
★ Increased Precision and Smoother Handling
★ Allows for Offset Grip Rotation - Perfect for Center Mounted Setups
★ Includes Cable Extensions
★ Metal Construction
★ Available in 50mm/75mm/100mm
★ Increased Precision and Smoother Handling
★ Allows for Offset Grip Rotation - Perfect for Center Mounted Setups
★ Includes Cable Extensions
★ Metal Construction
DAll good. I have the 10 (and others). Work perfectly
AThank you!
D
DOn the other hand, when you go to screw it onto the Rhino...go very quietly otherwise you risk damaging the Rhino's screw thread (3d printing is therefore more fragile).
ARoger that
KThe "Machined Aluminum Grip Mount Upgrade for Rhino" is really worth the price in my opinion. I use the PA12 printed version at the moment. It is ok as long as you are carefully and don't change the grip/extension often. But I've one aluminum here and will change it next time I change something at my rhino or simpit.
DYeah you're right. Unfortunately I didn't know this when I placed the initial order. So I took the plans supplied by Walmis and printed them out more solidly.
Anyway, if you don't change your grips every day, he won't have any problems
Anyway, if you don't change your grips every day, he won't have any problems
LIt's the one I use with their B8-style grip. No complaints.
COk what do if telemFFB isn’t recognizing any inputs
HNo, the motors are tuned to the VP software afaik.
EThank you
FIf 2 diy kits are ordered for a total of 4motors, can 2motors be used for a Collective and Rudder application with the same Vpforce software? Is this supported? So bassicaly a Joystick with 2 motors, and collective and rudders with one motor each? Thanks
Sno the rudder and collective will need separate boards
Sthen you can put the 3 boards in like this into telemffb
FThanks for your reply!, So I will need 3 boards and 4motors? Thanks
Syep thatll do it!
DMy condolences to Sshadow's friends and family. He was pretty well known in the IL2 MP community for many years. https://www.youtube.com/watch?v=pnOZmOYVTps
YouTubeilikevideogames
It is with a heavy heart that I write this, but virtual comrade and long-time friend of the IL-2 community =TBAS=Sshadow14 very sadly passed away this week in hospital.
We are very lucky that we don't have to deal with lost friends as real life fighter pilots did, but when they do come they hit very hard. He leaves a void that will always be pr...
We are very lucky that we don't have to deal with lost friends as real life fighter pilots did, but when they do come they hit very hard. He leaves a void that will always be pr...
RPulling the trigger on a bambulab x1c with ams. Anyone using one or have a particular printer they like. Needing covered and filtered case for asa and abs.
V:package: 
RHINO #0711 Has Shipped!
RHINO #0711 Has Shipped!V:package: RHINO #0710 Has Shipped!
RHINO #0710 Has Shipped!V:package: RHINO #0713 Has Shipped!
RHINO #0713 Has Shipped!
AI have the P1S (with the casing) and I have been pretty happy with it. Especially how compared to my previous ender it just delivers without me constantly calibrating stuff. The P1S does have a slow processor and camera, but I got the hardened nozzle and extruder anyway, so it is not that different in performance any more from the x1c
SInteresting report on Moza Discord about VPforce VKB adapter cracking when used with Moza AB9 base.
MThis was me, I’d be interested in seeing the 3D print file so I could make one out of alumni via cnc machine
M
KWhen are you going to finnish the scupture?
Ait would be nice to have a metal version of that available, it's one of the most important pieces of my existence at the moment
Aespecially since iirc there is now a metal TM socket available for the Rhino
MI’ve had that since I was a kid got it on vacation in Hawaii! I can’t even color inside the lines so sculpture is out of my wheel house
MI think the design is solid but the issue was on Moza’s side, which caused pressure in areas not expecting that pressure, on my back up adaptor I had to drill 4 alignment holes that are raised on the moza base. These allowed for a flush mount to the bad with the adaptor.
M
Ayeah it has held well for me for over 1½ years now (except one that broke in a game of W-F when someone input completely braindead settings into my rhino), but now that I've been working on a rebuild of my pit and taking things apart repeatedly, I kind of think I'd like a premium version of that
Ait's a very useful thing
DNot sure how tall those 4 pegs are, but could you just 3D print a special 5-hole-washer instead?
DA little thicker than they are tall.
MI don’t own a 3D printer “yet” but I could but I like metal better! The 4 holes also help with un intended rotation