All good. I have the 10 (and others). Work perfectly
All good. I have the 10 (and others). Work perfectly
AThank you!
D
DOn the other hand, when you go to screw it onto the Rhino...go very quietly otherwise you risk damaging the Rhino's screw thread (3d printing is therefore more fragile).
ARoger that
KThe "Machined Aluminum Grip Mount Upgrade for Rhino" is really worth the price in my opinion. I use the PA12 printed version at the moment. It is ok as long as you are carefully and don't change the grip/extension often. But I've one aluminum here and will change it next time I change something at my rhino or simpit.
DYeah you're right. Unfortunately I didn't know this when I placed the initial order. So I took the plans supplied by Walmis and printed them out more solidly.
Anyway, if you don't change your grips every day, he won't have any problems
Anyway, if you don't change your grips every day, he won't have any problems
LIt's the one I use with their B8-style grip. No complaints.
COk what do if telemFFB isn’t recognizing any inputs
HNo, the motors are tuned to the VP software afaik.
EThank you
FIf 2 diy kits are ordered for a total of 4motors, can 2motors be used for a Collective and Rudder application with the same Vpforce software? Is this supported? So bassicaly a Joystick with 2 motors, and collective and rudders with one motor each? Thanks
Sno the rudder and collective will need separate boards
Sthen you can put the 3 boards in like this into telemffb
FThanks for your reply!, So I will need 3 boards and 4motors? Thanks
Syep thatll do it!
DMy condolences to Sshadow's friends and family. He was pretty well known in the IL2 MP community for many years. https://www.youtube.com/watch?v=pnOZmOYVTps
YouTubeilikevideogames
It is with a heavy heart that I write this, but virtual comrade and long-time friend of the IL-2 community =TBAS=Sshadow14 very sadly passed away this week in hospital.
We are very lucky that we don't have to deal with lost friends as real life fighter pilots did, but when they do come they hit very hard. He leaves a void that will always be pr...
We are very lucky that we don't have to deal with lost friends as real life fighter pilots did, but when they do come they hit very hard. He leaves a void that will always be pr...
RPulling the trigger on a bambulab x1c with ams. Anyone using one or have a particular printer they like. Needing covered and filtered case for asa and abs.
V:package: 
RHINO #0711 Has Shipped!
RHINO #0711 Has Shipped!V:package: RHINO #0710 Has Shipped!
RHINO #0710 Has Shipped!V:package: RHINO #0713 Has Shipped!
RHINO #0713 Has Shipped!
AI have the P1S (with the casing) and I have been pretty happy with it. Especially how compared to my previous ender it just delivers without me constantly calibrating stuff. The P1S does have a slow processor and camera, but I got the hardened nozzle and extruder anyway, so it is not that different in performance any more from the x1c
SInteresting report on Moza Discord about VPforce VKB adapter cracking when used with Moza AB9 base.
MThis was me, I’d be interested in seeing the 3D print file so I could make one out of alumni via cnc machine
M
KWhen are you going to finnish the scupture?
Ait would be nice to have a metal version of that available, it's one of the most important pieces of my existence at the moment
Aespecially since iirc there is now a metal TM socket available for the Rhino
MI’ve had that since I was a kid got it on vacation in Hawaii! I can’t even color inside the lines so sculpture is out of my wheel house
MI think the design is solid but the issue was on Moza’s side, which caused pressure in areas not expecting that pressure, on my back up adaptor I had to drill 4 alignment holes that are raised on the moza base. These allowed for a flush mount to the bad with the adaptor.
M
Ayeah it has held well for me for over 1½ years now (except one that broke in a game of W-F when someone input completely braindead settings into my rhino), but now that I've been working on a rebuild of my pit and taking things apart repeatedly, I kind of think I'd like a premium version of that
Ait's a very useful thing
DNot sure how tall those 4 pegs are, but could you just 3D print a special 5-hole-washer instead?
DA little thicker than they are tall.
MI don’t own a 3D printer “yet” but I could but I like metal better! The 4 holes also help with un intended rotation
MProtrudes 1.3 to 1.5 mm. I have not measured so that’s my best guess
SI am still trying to understand how you are able to decide exactly where to drill the four holes.
MMy wife’s nail polish! Didn’t have a paint pen. But I placed a dot of polish on each of the 4 pins and the put the adaptor on and didn’t over tighten and then removed and drilled the marks. Also made sure the drill head was just slightly larger than the pin to ensure it fit over
*be carefull with the new update... stick went so hard forward in DCS Tomcat that it snapped Rhino thread in half... 
TDamn
CI have the A1 with AMS Lite and it’s great so far
FWow how long is your extension?
DHello to all! I am trying to make my diy ffb rhino ( Winger ) to work with IL2 sturmovik and have an issue with that. I only use ffb configurator not telemffb yet and i am loosing spring tension effect while trying to fly in IL2. I have enabled ffb inside il2 and when i disable it i am not loosing spring effect from my ffb rhino joystick. I have read somewhere else for another guy facing the same issue. I also face regular il2 crashes ( game suddenly stops and throws me out) when i use diy rhino ffb. Any solution to this? Thanks!
*★ 200mm Flightstick Extension
★ "S-Curve" perfect for center mount setups
★ Increased Precision and Smoother Handling
★ Allows for Offset Grip Rotation - Perfect for Center Mounted Setups
★ Includes Cable Extension
★ Metal Construction
★ "S-Curve" perfect for center mount setups
★ Increased Precision and Smoother Handling
★ Allows for Offset Grip Rotation - Perfect for Center Mounted Setups
★ Includes Cable Extension
★ Metal Construction
CUse Telemffb
DThank you! I will do that..
HI somehow destroyed the threads on my 20 mm Virpil extension. Suspecting it’s not up to handling the forces of the rhino. Ordered a 10 mm straight extension now to see if it will hold. So word of warning there, even though the gooseneck looks awesome and feels good.
KI don't have any problem with it. But I don't use my Rhino as a muscle training machine. I like to have feedback not Arm wrestling.
But that is personal taste.
But that is personal taste.
HPuny! No idea how I did it, truth be told. It just went wonky between the grip and extension. Maybe I’m just too awesome?