Is it possible to use `npx wrangler pages dev ./dist` but not from the ./dist folder b ut from the

RRicky U Is it possible to use `npx wrangler pages dev ./dist` but not from the ./dist f...

H

Hello, I’m Allie!•10/3/24, 6:14 AM

No, that was a thing with —proxy, but it was removed due to being a bit finnicky

H

Hello, I’m Allie!•10/3/24, 6:15 AM

The recommendation is to use a framework that supports bindings in dev mode

R

richtera•10/3/24, 11:45 AM

I am still struggling with api keys not supporting lockdown to either a specific worker or pages project as well as production and preview. Is this going to be fixed? It feels like I have asked several times and it seemed other people needed it as well. I am currently unable to invite other developers to help with workers or pages projects unless I use github ci, but when using github ci, it's kind of dangerous as well; if someone decides to change the github action to deploy on a different cloudflare project they can easily overwrite or deploy things they should not, especially on preview branches.

A

Advany•10/3/24, 12:10 PM

I dont know how to test...

Wangler dev work but not for DO with rpc.

Wrangler dev --remote works but not for static assets...

How do I combine both or test my code haha

Ttforster I designate one `.wrangler` as the primary one, then symlink it into the other p...

�

𝓈𝒽𝓎•10/3/24, 2:06 PM

I fixed it by adding --persist-to ../../ which will put the folder at the root of the monorepo

HHello, I’m Allie!No, that was a thing with —proxy, but it was removed due to being a bit finnicky

R

Ricky UOP•10/4/24, 9:45 AM

I see. I am using vue 2, not sure if it allows bindings?

RRicky U I see. I am using vue 2, not sure if it allows bindings?

H

Hello, I’m Allie!•10/4/24, 9:56 AM

Nuxt should, iirc, but don't know about straight Vue

A

Ashgreninja55555•10/5/24, 8:51 PM

I'm trying to login through cli using
npx wrangler login
. It opens a link in browser and asks for permission on the cloudfare page, then it opens a localhost page which doesn't load and says localhost refused to connect. CLI displays the error:
Error: ENOENT: no such file or directory, open 'C:\Users\hp\AppData\Roaming\xdg.config.wrangler\config\default.toml'
at writeFileSync (node:fs:2352:20)
at writeAuthConfigFile (D:\Atomic\newboard-server\newboard-db\node_modules\wrangler\wrangler-dist\cli.js:159075:37)
at Server.<anonymous> (D:\Atomic\newboard-server\newboard-db\node_modules\wrangler\wrangler-dist\cli.js:159169:13)
at process.processTicksAndRejections (node:internal/process/task_queues:95:5) {
errno: -4058,
code: 'ENOENT',
syscall: 'open',
path: 'C:\Users\hp\AppData\Roaming\xdg.config.wrangler\config\default.toml'
}

I then manually created default.toml in the mentioned path. I tried to login after this, then the issue was:
Error: EBADF: bad file descriptor, write
at writeFileSync (node:fs:2352:20)
at writeAuthConfigFile (C:\Users\hp\AppData\Roaming\npm\node_modules\wrangler\wrangler-dist\cli.js:159075:37)
at Server.<anonymous> (C:\Users\hp\AppData\Roaming\npm\node_modules\wrangler\wrangler-dist\cli.js:159169:13)
at process.processTicksAndRejections (node:internal/process/task_queues:95:5) {
errno: -4083,
code: 'EBADF',
syscall: 'write'
}

K

kritikal•10/6/24, 2:44 PM

hi all. I have a nextjs project that im currently deploying to pages without problem using github integration. Im currently trying to add wrangler to that repo so that I can develop with D1 locally. So i run

npx wrangler pages download config

npx wrangler pages download config

npx wrangler pages download config

npx wrangler pages download config
and get the toml file but when I run

npx wrangler pages dev

npx wrangler pages dev

in my root directory,
I just get the no functions shimming error and a 404 page. What else do i need to do?

Kkritikal hi all. I have a nextjs project that im currently deploying to pages without pro...

K

kritikal•10/6/24, 4:18 PM

Ok i managed to find the next on pages documentation: https://developers.cloudflare.com/pages/framework-guides/nextjs/ssr/get-started/ but unfortunately next-on-pages seems to have some problem on windows machine. I guess I need to do blind D1 write development for now before my mac arrives lmao

Cloudflare Docs

Get started | Cloudflare Pages docs

Deploy a full-stack Next.js app to Cloudflare Pages

V

Vero•10/7/24, 6:16 PM

Here's the recording of today's Wrangler Office Hours:bibicat:

Wrangler_Office_Hours_-_October_2024.mp333.25MB

T

topmass•10/8/24, 2:02 PM

probably asked here or before, why remove wrangler init ? its so easy to remember and is useful vs manually searching for npx create (framework)

A

Akash•10/9/24, 3:29 PM

it is possible to test cloudflare rules in local development environment with wrangler? If not then what is the recommended approach to test a pages application in local development environment which has many rules configured in production setup?

Original message was deleted

C

Chaika•10/9/24, 5:40 PM

?crossposting -> Wrangler r2 object put, get, and delete not doing anything locally

F

Flare•10/9/24, 5:40 PM

Please do not post your question in multiple channels/post it multiple times per the rules at ⁠#

welcome-and-rules. It creates confusion for people trying to help you and doesn't get your issue or question solved any faster.

T

Tempo•10/10/24, 12:02 PM

Hi there, is it possible to use wrangler (and wrangler.toml) to manage and deploy 2 pages projects from a single app root ?

I have an App bundled by sveltekit and the design system of this app (tied to the same src) bundle by an other tool.
My idea was to have a page project for each build but I don't find the way to write this in the toml and wrangler doesn't have option to select the toml used.

J

JuProxy•10/11/24, 4:54 AM

Hello, i'm having a really annoying bug. i have deployed via wrangler and my website is working but i'm not sure why it is showing data from my development instead of the production env variables. do you see anything wrong in my wrangler file?

name = "juproxy"
compatibility_date = "2024-10-04"
pages_build_output_dir = ".svelte-kit/cloudflare"

[[kv_namespaces]]
binding = "JUPROXY_KV"
id = "9221..."

[env.production.vars]
# General
PUBLIC_ORIGIN = "https://juproxy.com"
# Flask API
API_ADMIN_TOKEN = "secret..."
# Mail
RESEND_API_KEY = "re_..."
# Stripe
STRIPE_PRICE_ID = "price_..."
SECRET_STRIPE_WEBHOOK = "whsec_...."
SECRET_STRIPE_KEY = "sk_live_....

[[env.production.kv_namespaces]]
binding = "JUPROXY_KV"
id = "9221..."

name = "juproxy"
compatibility_date = "2024-10-04"
pages_build_output_dir = ".svelte-kit/cloudflare"

[[kv_namespaces]]
binding = "JUPROXY_KV"
id = "9221..."

[env.production.vars]
# General
PUBLIC_ORIGIN = "https://juproxy.com"
# Flask API
API_ADMIN_TOKEN = "secret..."
# Mail
RESEND_API_KEY = "re_..."
# Stripe
STRIPE_PRICE_ID = "price_..."
SECRET_STRIPE_WEBHOOK = "whsec_...."
SECRET_STRIPE_KEY = "sk_live_....

[[env.production.kv_namespaces]]
binding = "JUPROXY_KV"
id = "9221..."

name = "juproxy"
compatibility_date = "2024-10-04"
pages_build_output_dir = ".svelte-kit/cloudflare"

[[kv_namespaces]]
binding = "JUPROXY_KV"
id = "9221..."

[env.production.vars]
# General
PUBLIC_ORIGIN = "https://juproxy.com"
# Flask API
API_ADMIN_TOKEN = "secret..."
# Mail
RESEND_API_KEY = "re_..."
# Stripe
STRIPE_PRICE_ID = "price_..."
SECRET_STRIPE_WEBHOOK = "whsec_...."
SECRET_STRIPE_KEY = "sk_live_....

[[env.production.kv_namespaces]]
binding = "JUPROXY_KV"
id = "9221..."

name = "juproxy"
compatibility_date = "2024-10-04"
pages_build_output_dir = ".svelte-kit/cloudflare"

[[kv_namespaces]]
binding = "JUPROXY_KV"
id = "9221..."

[env.production.vars]
# General
PUBLIC_ORIGIN = "https://juproxy.com"
# Flask API
API_ADMIN_TOKEN = "secret..."
# Mail
RESEND_API_KEY = "re_..."
# Stripe
STRIPE_PRICE_ID = "price_..."
SECRET_STRIPE_WEBHOOK = "whsec_...."
SECRET_STRIPE_KEY = "sk_live_....

[[env.production.kv_namespaces]]
binding = "JUPROXY_KV"
id = "9221..."

inside my sveltekit app im accesing "PUBLIC_ORIGIN" env variable and it is giving me the localhost one, i also have a .env file locally should i remove it? not sure how to fix it

*if i remove my .env file, when running the following command:

pnpm run build && wrangler pages deploy

pnpm run build && wrangler pages deploy

pnpm run build && wrangler pages deploy

pnpm run build && wrangler pages deploy

then it gives me an error on sveltekit build, what is the correct command to deploy then? using env variables from wrangler config file

�

😈 Donkey 💫•10/11/24, 1:22 PM

Hello, There's no any startup-time output in cli, when running wrangler deploy

JJuProxy Hello, i'm having a really annoying bug. i have deployed via wrangler and my web...

K

kingmesal•10/11/24, 2:09 PM

It all depends on the id of the namespace you are binding to.

�

😈 Donkey 💫•10/11/24, 5:38 PM

I mean the docs say that start-up time will be estimated in CLI wrangler output, when deploying
But what i see is only a bundled size, even an independent worker

P

Patrick Pang•10/13/24, 2:28 PM

Hi, is it possible to launch a dev server with both hot reload from vite and env injected by wrangler dev? I have been trying with solidstart template but found that these two are split into

dev

dev

and

preview

preview

PPatrick Pang Hi, is it possible to launch a dev server with both hot reload from vite and env...

H

Hello, I’m Allie!•10/13/24, 2:44 PM

Your framework can give you access to bindings in dev via

getPlatformProxy

getPlatformProxy

getPlatformProxy

getPlatformProxy

HHello, I’m Allie!Your framework can give you access to bindings in dev via `getPlatformProxy`

P

Patrick Pang•10/13/24, 2:45 PM

ohh great thank you!

PPatrick Pang ohh great thank you!

H

Hello, I’m Allie!•10/13/24, 2:45 PM

Though at a quick glance, it doesn't look like Solid has this yet

HHello, I’m Allie!Though at a quick glance, it doesn't look like Solid has this yet

P

Patrick Pang•10/13/24, 2:47 PM

Yeah guess that is why I missed this. Looks like there is manual workaround https://github.com/solidjs/solid-start/issues/1394

GitHub

[Feature?]: Wrangler/Miniflare dev server for Cloudflare · Issue #1...

Duplicates I have searched the existing issues Latest version I have tested the latest version Summary

Solid-start's dev server doesn't use wrangler or miniflare for the Cloudflare preset...

A

Amos•10/13/24, 9:03 PM

I'm on

3.80.4

3.80.4

3.80.4

3.80.4 and running

wrangler types

wrangler types

wrangler types

wrangler types results in

✘ [ERROR] EISDIR: illegal operation on a directory, read

✘ [ERROR] EISDIR: illegal operation on a directory, read

✘ [ERROR] EISDIR: illegal operation on a directory, read

✘ [ERROR] EISDIR: illegal operation on a directory, read

Original message was deleted

A

Amos•10/14/24, 6:14 AM

It happens to me with the example project (

npm create cloudflare@latest my-astro-app -- --framework=astro --experimental

npm create cloudflare@latest my-astro-app -- --framework=astro --experimental

npm create cloudflare@latest my-astro-app -- --framework=astro --experimental

npm create cloudflare@latest my-astro-app -- --framework=astro --experimental)

J

James•10/14/24, 6:37 AM

What OS are you using?

JJames What OS are you using?

A

Amos•10/14/24, 8:15 AM

macOS Sonoma

D

DangerZone•10/14/24, 5:06 PM

Do we know if theres a size limit for json file in the bulk kv put command?

DDangerZone Do we know if theres a size limit for json file in the bulk kv put command?

D

DaniFoldi•10/14/24, 5:36 PM

For a single file, the size limit is always 25 MB. For the combined limit, I believe it is 100MB total.

D

DangerZone•10/14/24, 5:37 PM

so the limit is 10k key value pairs or 25mb?

D

DangerZone•10/14/24, 5:42 PM

oh each pair is at max 25mb, and the overall request can't be above 100mb

AAmos It happens to me with the example project (`npm create cloudflare@latest my-astr...

W

Wonky Onion•10/14/24, 5:42 PM

have you added anything to your astro project (was it the starter files or blog?) - i'm unable to reproduce with either, but we're seeing this error a bit and would like to get to the bottom of it womp :(

WWonky Onion have you added anything to your astro project (was it the starter files or blog?...

A

Amos•10/14/24, 5:44 PM

I don't think it was the blog one, but the other one that they recommend with some starter files. I didn't change anything

W

Wonky Onion•10/14/24, 6:26 PM

Ah yep it’s broken - thanks for the report, I’ll go have a look

A

ac•10/15/24, 2:06 PM

Does anyone have best practices for handling wrangler.toml files in a monorepo? We have them all over, and with apps/packages/workers all needing them to some extent, it can get pretty confusing to make sure we have the right bindings in the right places without massive duplication everywhere.

�

😈 Donkey 💫•10/17/24, 4:20 AM

AiError

K

kchro3•10/17/24, 11:26 PM

Hey folks, I had a pretty rough dev experience with using durable objects, and it would be nice to get some guidance on best practices.

In a dev branch, i set up my Toml file to have a durable object binding without an env (as per docs), but it looked like when i ran wrangler dev —remote, it created a durable object in prod.

That caused a lot of problems, and a separate branch that wasn’t related was unable to deploy bc it didn’t have the migration to delete the durable object.

Also, it looked like deploying to remote dev would update the durable object in prod.

As an example, I don’t really have a good idea of the dev lifecycle. Like if I create a DO for the first time, what should my toml file look like to test & deploy? And after several iterations, what would it look like (e.g. do I need to delete migrations after every deploy?)

Kkchro3 Hey folks, I had a pretty rough dev experience with using durable objects, and i...

H

Hello, I’m Allie!•10/17/24, 11:43 PM

Migrations are only for if you create a new class, rename a class, or delete a class. They don't need to be added for each deploy

HHello, I’m Allie!Migrations are only for if you create a new class, rename a class, or delete a c...

K

kchro3•10/17/24, 11:55 PM

thanks for responding.

is it expected that doing dev —remote would deploy a production asset?

My unrelated branch was failing to deploy because the toml file didn’t have a reference to a durable object that was only defined in a test branch. I can’t remember the exact error, but I had to add a migration in my unrelated branch to delete the existing durable object and then in a follow up, I needed to remove the migration because now there was no durable object to delete.

It was a headache because I didn’t even deploy the durable object intentionally

Kkchro3 thanks for responding. is it expected that doing dev —remote would deploy a pro...

H

Hello, I’m Allie!•10/18/24, 2:23 AM

Maybe? I don't know the particulars for DOs specifically, but

--remote

--remote

mode is kind of weird because it has to interact with prod services for stuff like R2

H

Hello, I’m Allie!•10/18/24, 2:23 AM

I would go local, if possible, to minimize issues like that

K

kchro3•10/18/24, 2:38 AM

ok, in general, do you know if you have to clean up the migrations in the toml files?

Even if i developed locally, it seems like there’s a step where you need to remove migrations after classes are deleted etc, and that seems annoying if you have version control and work with multiple people

C

ceddy•10/18/24, 6:07 PM

How to solve this issue, when using a custom port with HTTPS

known issue with fetch() requests to custom HTTPS ports in published Workers: the custom port will be ignored when the Worker is published using the "wrangler deploy" command.

known issue with fetch() requests to custom HTTPS ports in published Workers: the custom port will be ignored when the Worker is published using the "wrangler deploy" command.

known issue with fetch() requests to custom HTTPS ports in published Workers: the custom port will be ignored when the Worker is published using the "wrangler deploy" command.

known issue with fetch() requests to custom HTTPS ports in published Workers: the custom port will be ignored when the Worker is published using the "wrangler deploy" command.

N

net2income•10/21/24, 3:58 PM

Anyone knows how to login to wrangler in project IDX?

Is it possible to use `npx wrangler pages dev ./dist` but not from the ./dist folder b ut from the

Similar Threads

Similar Threads

Similar Threads