DevHeads IoT Integration Server•15mo ago

Hi @Roshan Baig Mogal Great, these days in Engineering Hour covers wide topics like FreeRTOS, CMSI

Hi @Roshan Baig Mogal Great, these days in Engineering Hour covers wide topics like FreeRTOS, CMSIS-RTOS, etc. with STM32F4 Nucleo. Also, for beginners getting-started type videos incl. basic, adc, pwm, uart etc. I suggest to check the playlist https://www.youtube.com/watch?v=NnwE9EfFpls. Cheers!

asefmo•10/11/24, 10:37 AM

hi!

asefmo•10/11/24, 10:40 AM

Has someone some knowledge about Lorawan

Aasefmo Has someone some knowledge about Lorawan 🙂

ZacckOsiemo•10/11/24, 1:01 PM

if you just ask the question someone may answer

Dtynin•10/11/24, 2:12 PM

Hey guys, what do you think? Is the use of Proprietary software better than Open-source software in Critical systems such as those used in healthcare, aviation, or government? I'd like to know your judgments when it comes to critical systems. Let me hear your view.
@Middleware & OS @MCU, MPU & Firmware

DDtynin Hey guys, what do you think? Is the use of Proprietary software better than Open...

ZacckOsiemo•10/11/24, 2:27 PM

If it's a critical software some part of it will surely end up being proprietary and depending on how you develop some parts of it will be open source, I think this is a very wide net cast here. Keen to see what others feel

DDtynin Hey guys, what do you think? Is the use of Proprietary software better than Open...

Ming•10/11/24, 2:33 PM

Define 'better'!
Do you any kind of networking? If so, they are probably using something from the BSD TCP/IP Stack - which is open source.
Do these services run on a server? If so they will probably be running Linux - which is open source.

Having worked in all of those sectors, what you may find is that they want a 'supported' version of things. That's why they want something like RedHat or Ubuntu. These are still open-source

they just come with a support contract and a phone number that the customer can use to shout at some poor techie when something goes wrong.

aying for something != closed source

nour_oud•10/11/24, 2:46 PM

@here 10 minutes until our event: Embedded or Not, Virtualization is Headed Towards a Device Near You
Don’t miss it!
https://discord.gg/7YmCCMFe?event=1293245463713288233

nour_oud•10/11/24, 2:54 PM

Event Link: https://app.livestorm.co/devheads-community/devheads-weekly-office-hours-1

ZZacckOsiemo If it's a critical software some part of it will surely end up being proprietary...

Dtynin•10/11/24, 3:19 PM

well..I concur, was wondering what could be the view of others on it.

UUmesh Lokhande Hi @Roshan Baig Mogal Great, these days in *Engineering Hour* covers wide topics...

Roshan Baig Mogal•10/11/24, 6:23 PM

Hi @Umesh Lokhande,
Thanks a lot for the playlist. I will check that one and today's session on virtualization was very informative.
Thanks!

Aasefmo hi!

techielew•10/11/24, 7:27 PM

Yes there are some community members who work with it. What's your question/issue, Asefmo? BTW, welcome. (@zacck lives under a bridge and eats all manner of bones)

RRoshan Baig Mogal Hi @Umesh Lokhande, Thanks a lot for the playlist. I will check that one and to...

Umesh LokhandeOP•10/12/24, 3:15 AM

Hi Roshan, Welcome! Glad to know you found today's session useful.

Accur4te•10/12/24, 3:56 PM

Hey everyone, I'm currently working on an electromagnetic flow meter project and have finished the assembly, including the electrodes and Faraday cage. Now, I’m moving on to the circuitry, but I’m facing some challenges. The signals from the electrodes are in the mV range (or smaller), so I’ll need an amplifier circuit for proper signal processing. Additionally, I’m looking for a suitable H-bridge or similar setup for controlling the electromagnets.

As a second-year undergraduate student, I don’t have enough experience to confidently move forward with the design. Could anyone recommend resources or guidance on how to approach the circuit design for these requirements?

wafa_ath•10/12/24, 5:57 PM

Elon Musk has officially announced the launch of Tesla’s Optimus robot, designed to handle many of the same tasks we saw in the movie .

The price for one unit is around $20,000, which many consider to be quite affordable for American households and even internationally

What are your thoughts on its impact on automation, and would you get one?

Wwafa_ath Elon Musk has officially announced the launch of Tesla’s Optimus robot, designed...

Marvee Amasi•10/12/24, 6:51 PM

almost a real life Jarvis from Iron Man tho . But jokes aside, the Optimus robot can really do tough jobs, it might change how factories and businesses work. Is Tesla using their existing neural networks for control, or did they build something new for this robot?

Wwafa_ath Elon Musk has officially announced the launch of Tesla’s Optimus robot, designed...

aymen ammari•10/12/24, 7:29 PM

Wow, looks like we're one step closer to living in a sci-fi movie! With a $20,000 price tag, Optimus could be the most expensive housekeeper ever—but hey, at least it won’t complain about doing the dishes!

nour_oud•10/12/24, 9:04 PM

Master the essentials of task synchronization in FreeRTOS with our session on Mutexes & Semaphores for Arm Cortex-M. Learn to effectively manage resource sharing, improve application stability, and implement best practices for real-time systems! @Event Pings
https://discord.gg/7YmCCMFe?event=1293257252496736329

Wwafa_ath Elon Musk has officially announced the launch of Tesla’s Optimus robot, designed...

Boss lady•10/13/24, 9:25 AM

Wow this is nice i hope we dont leta regret the choices of having robots run our daily lives

Aaymen ammari Wow, looks like we're one step closer to living in a sci-fi movie! With a $20,00...

Boss lady•10/13/24, 9:26 AM

Until it gets smarter and start questioning why u dont do things

te0•10/13/24, 10:19 AM

anyone here who's been working in the industry for years?

te0•10/13/24, 10:19 AM

i just wanted to know where is embedded heading to?

te0•10/13/24, 10:19 AM

low power, linux, AI

Tte0 anyone here who's been working in the industry for years?

Ming•10/13/24, 1:07 PM

Does 30 years in the industry count?
The only thing one can say with certainty is: Smaller, Faster, Cheaper
There will always be a split between Bare Metal, RTOS & Linux - mainly because these fill difference niches. There will just be more of all three.

My only guess is that the AI bubble will burst. At the moment, you just slap an 'AI' label on it and then go raise some investment. This is something I have seen too many times with DotCom, Web2.0, etc, etc.
They all burst - leaving the things that actually had purpose space to grow properly.

LLMs are good for helping, but they don't understand.
There is a lot of good AI/ML out there, but is in far more specific areas not general level intelligence.
When I was researching AI in 1992, full AI was always '20 years away'. 30 years later, it is still '20 years away'! Saying that, the advances are coming through far more rapidly now.
As embedded gets more powerful, then yes, there will be a lot more 'AI' at the edge as there has always been a flow of technology down to the smaller devices. I remember when having a network stack on a hand-held device was exciting!

MMing Does 30 years in the industry count? The only thing one can say with certainty ...

techielew•10/13/24, 2:15 PM

I’m curious how much the Musk Optimus robots “understand” at this point. You’d think they would have to at least to some extent to perform as advertised.

Tte0 i just wanted to know where is embedded heading to?

Umesh LokhandeOP•10/13/24, 2:35 PM

These days I see embedded devices in two forms, low-power battery operated devices used widely in IoT. And other category is power-hungry devices, capable of running n training AI algo. and require huge compute. Now as future is AI, with embedded devices surely become more expensive in terms of power consumption. Because energy is not yet cheap at many geo. But, I agree and enjoy reading news and learning associated cost in the market for operation and deployment. By the way it's possible to run small logic (pre-trained model) in the form of rules to perform at the edge for battery-operated embedded devices. Now you can called it as AI or not is very subjective. Happy to hear from others perspective.

Nnour_oud Master the essentials of task synchronization in FreeRTOS with our session on Mu...

nour_oud•10/13/24, 3:02 PM

@here The event is starting now! Come and join us
Event link: https://app.livestorm.co/devheads-community/devheads-weekly-office-hours-1

DevHeads IoT Integration Server

Engineering Hour: Mutexes and Semaphores with FreeRTOS on Arm Corte...

PLEASE JOIN AS A SPEAKER IF YOU WANT TO PARTICIPATE IN THE DISCUSSION!Join DevHeads meetups to connect with other DevHeads and riff on a variety of topics for 30-60 minutes. Join here: https:...

Ttechielew I’m curious how much the Musk Optimus robots “understand” at this point. You’d t...

Ming•10/13/24, 6:15 PM

To me ‘understanding’ would be teaching it to iron a pair of trousers and then giving it a shirt. How can it cope with inferred knowledge.

MMing To me ‘understanding’ would be teaching it to iron a pair of trousers and then g...

techielew•10/13/24, 6:22 PM

Does inferred knowledge like this require a level of unsupervised learning? I guess it would have to... which is also the great fear when you have an army of robot slaves all around us.

Ttechielew Does inferred knowledge like this require a level of unsupervised learning? I gu...

Ming•10/13/24, 6:25 PM

the great fear when you have an army of robot slaves

That’s why we have the three laws of robotics

Abdullah•10/13/24, 7:57 PM

I have a tds sensor in the data sheet that reads from 1000-0 PPM, but there is a project on the market that has the same sensor attached to it, which is the tds meter v1, that reads up to 10,000. How did it manage to do that? Can anyone help me?

AAbdullah I have a tds sensor in the data sheet that reads from 1000-0 PPM, but there is a...

techielew•10/14/24, 3:36 AM

Are you sure it’s the same sensor? Did you double check the sensor datasheet (not a wiki) and also double check the product is in fact using the same sensor and only that sensor?

! Alarm !•10/14/24, 6:34 AM

Who wants to work with me long term and earn money?
I am a developer.

!! Alarm !Who wants to work with me long term and earn money? I am a developer.

ZacckOsiemo•10/14/24, 6:35 AM

Ok tell us how will they make money working with you?

!! Alarm !Who wants to work with me long term and earn money? I am a developer.

techielew•10/14/24, 8:28 AM

What is the job? Put it in #jobs

Ttechielew Are you sure it’s the same sensor? Did you double check the sensor datasheet (no...

Abdullah•10/14/24, 1:35 PM

Yes, I am sure it is the same sensor. I read the sensor data sheet from the manufacturer and it only reads 1000 PPM, but I do not know how to make it read 10,000 PPM.

Mmatthewflynn_I'm a bit of a newby to this so I'll happily be guided - its on a raspberry pi 2...

techielew•10/14/24, 3:31 PM

@ZacckOsiemo @Camila_99$$ @Middleware & OS did you guys check out Matthew Flynn's code: ✅-code-review.Net Class for Invensnese ICM-20948

Abdullah•10/14/24, 10:04 PM

Is it possible to connect arduino uno R4 wifi to blynk platform with a library like blynk.edgnt where I can change the password and wifi network name without having to change the code?

AAbdullah Is it possible to connect arduino uno R4 wifi to blynk platform with a library l...

Marvee Amasi•10/15/24, 6:11 AM

Yes very possible

Marvee Amasi•10/15/24, 6:11 AM

@kbrsi

AAbdullah Is it possible to connect arduino uno R4 wifi to blynk platform with a library l...

Umesh LokhandeOP•10/15/24, 6:12 AM

It's possible, you may need to use OTA feature provided in Blynk Cloud. It has a dedicated OTA tab in the dashboard. I mean you can change the password in the form of new firmware release (over the air) update

ZacckOsiemo•10/15/24, 9:04 AM

Oh my word! https://www.communica.co.za/collections/specials/products/fnirsi-dso1013d-dual-ch-100mhz does anyone already have one of these. I might loan out a kidney to try this.

Communica South Africa

FNIRSI DSO1013D DUAL CH 100MHZ

1013D is a Tablet Screen-Touch Oscilloscope in a Handheld Portable Size. 100MHz Bandwidth/1GSA/S Sampling Rate 2CH Tablet Oscilloscope witH 3.7V 6000mAh BatteryDual Channel Touchable Panel Oscilloscope Features 2 Channels Portable Handheld Tablet Oscilloscope 1GSa/s Sampling Rate (1X=5MHz,10X=100MHz) 100MHZ * 2analog

ZZacckOsiemo Oh my word! https://www.communica.co.za/collections/specials/products/fnirsi-dso...

melta101•10/15/24, 9:20 AM

looks nice
i personally prefer the displayless one due to its small size and ease

melta101•10/15/24, 9:21 AM

i am also in search of oscilloscope

Mmelta101 looks nice i personally prefer the displayless one due to its small size and eas...

ZacckOsiemo•10/15/24, 9:22 AM

yeah but that's an extra cable going into the host and then you are juggling buttons and when to start it.

ZZacckOsiemo yeah but that's an extra cable going into the host and then you are juggling but...

melta101•10/15/24, 9:23 AM

point

melta101•10/15/24, 9:23 AM

never thought of that

ZacckOsiemo•10/15/24, 9:23 AM

Also if you dont have usb 3.0 some signals are going to be hard to catch nicely

ZacckOsiemo•10/15/24, 9:24 AM

But I also love the logic analyser as well, I with they made a bus pirate that had a screen

ZZacckOsiemo But I also love the logic analyser as well, I with they made a bus pirate that h...

melta101•10/15/24, 9:24 AM

as in?

ZacckOsiemo•10/15/24, 9:25 AM

http://dangerousprototypes.com/docs/Bus_Pirate

Hi @Roshan Baig Mogal Great, these days in Engineering Hour covers wide topics like FreeRTOS, CMSI

Similar Threads

Similar Threads

Similar Threads

Hi @Roshan Baig Mogal Great, these days in *Engineering Hour* covers wide topics like FreeRTOS, CMSI

Similar Threads

Similar Threads

Similar Threads

Hi @Roshan Baig Mogal Great, these days in Engineering Hour covers wide topics like FreeRTOS, CMSI