if you mean in the horizontal plane, it is exactly 6,5 cm on the short end and sides (not accountin
if you mean in the horizontal plane, it is exactly 6,5 cm on the short end and sides (not accounting for the belts).
H11,5 to the long end. The Body of the Rhino is 180 190 (sorry, memory fooled me) by 130 and the Gimbal is 130 by 130.
MI have to account for the gears/belts too
MI assume they're 2.5 cm each?
HThe Production Rhino comes with 10mm Belts afaik. Plus clearence on both sides - lets say 20mm total. The Kit-Rhinos use 15mm belts,
HI turned my Rhino 90 degrees to have a short side without belt close to my chair for that very reason......
MI mean the vpforce rhino
Says in the documentation that it's 205 mm long
Says in the documentation that it's 205 mm long
M
MI mean the distance from left end of the belt to the center of the stick
MIf the body is 180 mm and doc says body + belt is 205 then the belt has to be 25 mm but it seems like a bit too much so something is off
M@Hiob do you happen to use a quick release?
MI won't really be able to use the quick release I found sideways, and I will need it... But it seems that the mounting holes on the rhino are spaced only 0.32 mm differently when turned sideways
MI wonder if that will fit if I keep the QR orientation the same but rotate the rhino. Doesn't seem like too much of a difference
HSorry, my memory fooled me. The body is 190 by 130
Hno, but I made several custom modifications to my Rhino, including the base plate.
FAs far as I know the qr4rig quick releases have a modular design - that means if you create the plate between the Rhino and the quick release plate yourself (3D printing, wood) you can freely choose placement and orientation (e.g. QRUHD Universal Quick Release Plate Kit (DIY) and using the hex pattern https://qr4rigs.com/index.php?main_page=product_info&cPath=24&products_id=140).
QR4rigs, Quick Release Mounts for Sim Rigs QRUHD Universal Quick Release Plate Kit (DIY) [QRUHDUniQR] - This QRUHD Universal Quick Release Plate Kit is designed to allow mounting of unsupported controllers on to our QRUHD Quick Release System and also provides a stable surface for mounting our QRDee Base Mount 40 or QRPro Base Mount 40 to enable...
![QRUHD Universal Quick Release Plate Kit (DIY) [QRUHDUniQR] : QR4rig...](https://images-ext-1.discordapp.net/external/8WqKHOg1iUmvmOcJTwBWJbnilWQwBpxFi08PbZhR_40/https/qr4rigs.com/includes/templates/mrpix/images/weblogo.jpg)
V:package: 
RHINO #0738 Has Shipped!
RHINO #0738 Has Shipped!V:package: RHINO #0736 Has Shipped!
RHINO #0736 Has Shipped!V:package: 
RHINO #0737 Has Shipped!
RHINO #0737 Has Shipped!
WIT’S HAPPENING!!! 
I got an aircraft number too, lol, though the one plane I won’t be using it with. 
I got an aircraft number too, lol, though the one plane I won’t be using it with. 
FAlmost 300 units since I got mine this year. Mental
AI don't feel like a unique snowflake anymore
FFFB becoming mainstream in flight simming. Lol
BDo newer Rhinos (SN 0656) have fans at all? When I test this with the VPforce_FFB_Configurator nothing seems to happen.
WHas come a long way mine is SN 0078 lol
LSN 0072 says hello 
FI do, but only cause I made one myself (should've chosen a more rugged gimbal though, meed some time to rectify that)
HI would be puzzled if not. You should be able to see it through the grill though. Have you tried the in the debug page?
HIt takes quite some time from playing (depending on what you’re doing)
BYes, I startet "Test Fans" on the debug page. The fan (found it with a torch) does not move.
Bright of the plate
MCould someone please tell me what is the length of the shaft in the vpforce rhino? Calculating what kind of extension would fit on my setup
MGiven 22 degrees throw every millimeter counts with my setup :p
WMake sure it's fully powered via DC plug and e-stop switch is on (motors are running), the fans are one on the opposite side of the pic and one on the rear.
MThank you! Maybe I should've asked what is the distance from the top to the pivot point - but this should be close enough for my use case
BYou have to press the switch, then the fans do run. Many thanks for the tip!
HI moved up 100 places in 7 days, this rate is crazy
TIf the MFG Crosswind kit would also move, that would be terrific 
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
SThere is a Kit already available from @kaltokri thou for the MFGs
SThe @Hiob Kit Made AS a Kit ready to purchase.
V:package: RHINO #0739 Has Shipped!
RHINO #0739 Has Shipped!
TI ordered the Rhino's 8020 metal mount. The one side with the 2 bolts is snug to my 8020 but the other side has alot of slop or flex in it. The Rhino will bounce up and down when I stall a plane and it's kind of annoying. I tried placing some small rubber pieces between the metal but it still has slop in it. Should I just try to drill some holes and mount with more bolts? I can't really counter sink is though?
HI wrapped some electrical tape around it to have a snug fit.
TRelated to metal mounts, any chance we can get a metal VKB adapter (gunfighter 4)? Would be great to have the peace of mind with metal. And then I could Frankenstein a VKB grip onto a RealSimulator base too…
*A little video of me and my son replacing the thread head and installing the throw limiter... 
https://youtu.be/Gau9bPVesfY
https://youtu.be/Gau9bPVesfY
YouTubegodfreynet
Performed by my 11 years old wingman, under my supervision...
Music used in video:
Pat and Mat Soundtrack (A JE TO! 1979-1985)
Music used in video:
Pat and Mat Soundtrack (A JE TO! 1979-1985)
Cvery excited for my rhino to turn up over the last few days - could anyone point me in the direction of a good solution to mount it to a NLR flight seat pro? ive heavily considered just throwing some plywood underneath the seat and bolting the rhino to that but itd be a big pain in the ass so if theres someone that makes a mounting plate for the existing center mount on the seat or has another idea thatd be amazing
THello 3d printers Whats the best budget 3d printer I can get I mean dirt cheap? $150.00 or less?
TAnd would it be junk?
BCould likely find a used ender 3 or something for $100.
Sizeable area but lacks any automation so require learning what craft there is in printing but can definitely achieve great prints with the effort.
Sizeable area but lacks any automation so require learning what craft there is in printing but can definitely achieve great prints with the effort.
Hhi, a brand new bambulabs A1 mini is just 199,- bucks and far FAR superior to any Ender 3 kind of printer. Seriously don't save 50 bucks and get 20% of the performance.
