I don't right now. Biggest thing is trying to learn more of PCB design.
I don't right now. Biggest thing is trying to learn more of PCB design.
TWhat's your background?
MI'm a system administrator/engineer, mainly dealing with computer networks. I'm a hobbiest and attempt to teach myself new things all the time. I've done some arduino programming and a bit of a gear head. I've developed a digital dashboard using a RK3399 from Firefly for a car that I'm doing a retro mod on. I've gotten to a point where I feel my next step in doing what I'm wanting to do with it will require me to make my own PCB's because the things I'm wanting don't exist. I would say I'm a novice to intermediate with PCB components, where I understand what things are and can look at schematics or wiring diagrams and understand them.
UHave you tried to uninstall and re-install the Arduino IDE? to make sure that all dependencies got installed properly. especially, that show up after the installation. Also, make sure to Install your board's Package Core.
TWhat are the things you're wanting?
TSpecifically
ZWould anyone care to see a side by side comparison of FreeRTOS and Zephyr? I have always wondered what would we see if we took two operating systems and implemented the same kind of system on same kind of hardware.
Mi think i have a analysis between threadX/zephyr/FreeRTOS by benningo
MBeningo Embedded GroupJacob Beningo
The RTOS Performance Report is an in-depth benchmarking analysis of RTOSes and their performance across key areas to embedded systems, including:
Zyeah this is cool but this is also a bit obviously skewed, I am wondering about demoing like specific features say we have a mutex problem and we try to solve it with FreeRTOS and Zephyr but on the same architecture
ZSay something like 2 tasks wants to share 2 uart to communiicate with a terminal, we could implement this on stm32f4 on zephyr and same on stm32f4 on freertos, then step back and look at the differences between both approaches, would you be keen on that @melta101
ZIt's like when we used to do the same app on react, elm, vue, angular then benchmark.
Mmakes sense
it would little more real world application in that way too.
it would little more real world application in that way too.
Zwould you do it any different?
Zor in other words, what would you compare between freertos and zephyr
MI would like compare pwr consumption, time taken for a message to pass using ipc
MFew things like these come to my mind
Zthat's even better!
MMetrics in the form that would help people who like project manager who care about real world aspect in comparison
Above are a few I could think so
Above are a few I could think so
MNetwork testing
MCould compare network stacks if time allows
Umaybe it would be interesting to see how different feature's been used in frameworks like FreeRTOS & Zephyr. How things are handled differently from configuration to handling common issues.
Mcapabilities comparison
that is nice
that is nice
MHave anyone worked with nucleo board using mangoose library connect with aws iot
THey @Event Pings, we're going to be getting started with this week's Office Hours in about 30 minutes.
Excited to hear from @Middleware & OS devs in particular to come share your experiences with open source technology, and perhaps lend some tips to your fellow devs so they can avoid any OSS pitfalls in their development.
Excited to hear from @Middleware & OS devs in particular to come share your experiences with open source technology, and perhaps lend some tips to your fellow devs so they can avoid any OSS pitfalls in their development.
DHello all,
Any idea from where I can get better hands-on experience in RPi bare metal?
Wanted to learn from scratch, one of the colleague suggested try RPi bare metal - printing Hello world on RPi baremetal, then I'll get better idea about device drivers, cpu, systick, any other topics.
Thanks in advance for your help!
Any idea from where I can get better hands-on experience in RPi bare metal?
Wanted to learn from scratch, one of the colleague suggested try RPi bare metal - printing Hello world on RPi baremetal, then I'll get better idea about device drivers, cpu, systick, any other topics.
Thanks in advance for your help!
DHello all,
I want to use an adc ic to get audio data from mic but i don't find any suitable ic, can anyone help me in this problem?
Thanks all for your help!
I want to use an adc ic to get audio data from mic but i don't find any suitable ic, can anyone help me in this problem?
Thanks all for your help!
T@JeremyCook @aymen ammari have you all been working on similar systems?
TOh there should be plenty to help out with this, DINO, but @Umesh Lokhande would probably have a good idea of where to start or some sessions we may be able to put together around the topic since he's built training sessions on Pi before.
Otherwise @wafa_ath and @Renuel Roberts have Pis.
Do you have a Pi of your own? If so, which one?
Otherwise @wafa_ath and @Renuel Roberts have Pis.
Do you have a Pi of your own? If so, which one?
UHere's a playlist to learn bare-metal programming of RPi https://www.youtube.com/playlist?list=PLVxiWMqQvhg9FCteL7I0aohj1_YiUx1x8. Personally, I'd prefer PICO over RPi3/4/5 to learn bare-metal. If you're a little bit experienced then maybe it's fine to choose regular RPi.
Rhttps://www.valvers.com/open-software/raspberry-pi/bare-metal-programming-in-c-part-1/
http://www.cl.cam.ac.uk/projects/raspberrypi/tutorials/os/
http://www.cl.cam.ac.uk/projects/raspberrypi/tutorials/os/
Various information about engineering and computing things. Just tid-bits from an enthusiast
MIf you are up for an adventure https://github.com/s-matyukevich/raspberry-pi-os or the Rust version https://github.com/rust-embedded/rust-raspberrypi-OS-tutorials
they go well into building drivers.
they go well into building drivers.
GitHub
Learning operating system development using Linux kernel and Raspberry Pi - s-matyukevich/raspberry-pi-os
GitHub
:books: Learn to write an embedded OS in Rust :crab: - rust-embedded/rust-raspberrypi-OS-tutorials
DI have RPi3 and 5
DPICO is a controller, I am currently learnig bare-metal for Nucleo L4 series via udemy course.
Wanted to learn and explore processor bare-metal to strengthen the concepts of processors.
Thanks for the help @Umesh Lokhande !
Dhanyawad!
Wanted to learn and explore processor bare-metal to strengthen the concepts of processors.
Thanks for the help @Umesh Lokhande !
Dhanyawad!
DNever tried Rust
, will follow the first link.. looks interesting..
Thanks @32bitSaviour !
, will follow the first link.. looks interesting..Thanks @32bitSaviour !
J@Dũng I don't know that I've ever set up a microcontroller to record audio (just play it back), but I believe there are a lot of chips/boards that are capable or such operation. Searching around, here's one example with a Raspberry Pi Pico/RP2040 https://www.electromaker.io/project/view/raspberry-pi-pico-audio-recordplaywav-file of doing what I think you want to do, though there are a few external components involved. Also, IIRC, the RP2040 uses storage on an external chip, so you would need that available.
Or if you mean just responding to keywords for IoT control etc, I believe there are a lot of examples with Arduino Hardware, such as the Nicla Voice: https://docs.edgeimpulse.com/docs/edge-ai-hardware/mcu-+-ai-accelerators/arduino-nicla-voice
There are definitely options, but where you go depends on the project specifics.
Or if you mean just responding to keywords for IoT control etc, I believe there are a lot of examples with Arduino Hardware, such as the Nicla Voice: https://docs.edgeimpulse.com/docs/edge-ai-hardware/mcu-+-ai-accelerators/arduino-nicla-voice
There are definitely options, but where you go depends on the project specifics.
This project has been designed to be a very simple and easy to understand, audio recording and playback system. Using a Raspberry Pi Pico and C programming language. It has the added facility to also save WAV formatted files, which can be played directly on Linux, Windows & Mac OS.
Sfor basic web development, should i learn java script or just go with python flask,html?
KAny DSP nerds around?
I've been messing about with concepts related to 1 bit ADCs recently out of some curiosity
In playing around, I realised that when we are dealing with 1 bit signals, the and operator and multiplication are orthogonal i.e.
Now for a mixer, we want to multiply some signal, by some LO complex signal, and get the output mixed complex signal
So - the question becomes:
If I take a PDM (pulse density modulation) signal and LO, and
The answer seems to be yes..
This is a little side tangent from a project where I am trying to make a 1 bit SDR, now I think I need to add as a stretch goal trying to make a digital mixer like this
In theory, I can take a 1 bit signal into LVDS+ on an FPGA LVDS channel and inject whatever noise or signal on the other signal. To just make PDM, we want to put white noise in there, that works fine. But this tells me maybe there is an opportunity to make a mixer feeding PDM signals in instead of noise.
I wonder if anyone tried something like this or has some thoughts related to it. There is prior art for simply making 1 bit ADC using FPGA channels but I haven't found any literature related to this.
P.S. there are a lot of harmonics - they are mostly from the 1bit conversion and can be mitigated to some extent with MORE NOISE, I am ready to find out that even though it can kind of work, it cannot work well enough to ever be useful, but where is there is too much fun finding out the hard way
I've been messing about with concepts related to 1 bit ADCs recently out of some curiosity
In playing around, I realised that when we are dealing with 1 bit signals, the and operator and multiplication are orthogonal i.e.
Now for a mixer, we want to multiply some signal, by some LO complex signal, and get the output mixed complex signal
So - the question becomes:
If I take a PDM (pulse density modulation) signal and LO, and
& them together - do I get a mixer.The answer seems to be yes..
This is a little side tangent from a project where I am trying to make a 1 bit SDR, now I think I need to add as a stretch goal trying to make a digital mixer like this
In theory, I can take a 1 bit signal into LVDS+ on an FPGA LVDS channel and inject whatever noise or signal on the other signal. To just make PDM, we want to put white noise in there, that works fine. But this tells me maybe there is an opportunity to make a mixer feeding PDM signals in instead of noise.I wonder if anyone tried something like this or has some thoughts related to it. There is prior art for simply making 1 bit ADC using FPGA channels but I haven't found any literature related to this.
P.S. there are a lot of harmonics - they are mostly from the 1bit conversion and can be mitigated to some extent with MORE NOISE, I am ready to find out that even though it can kind of work, it cannot work well enough to ever be useful, but where is there is too much fun finding out the hard way
AI have connected the arduino r4 wifi to the iot cloud arduino. How can I change the password and email without changing the code? Can you help me?
T@Navadeep may have something to add
N
ACan someone help me? I am using arduino uno r4 wifi. I want to change the wifi semi via iot remote arduino or blynk app. I am tired of searching. I did not find a clear way.
TThis is a warning; put this type of post in #jobs. I am deleting it.
ACan you explain this method to me more or send me a blog or a video clip that explains it, where do I get the OTA file from and how do I make it support arduino uno r4 wifi and how do I enter the wifi network name and password? Please, I really need this. I want to change the wifi network name and password on blynk or iot remote arduino through the phone application
Ahow ?
KHey everyone,
check out my experiences at the Hong Kong Electronics Fair:
check out my experiences at the Hong Kong Electronics Fair:
K
TAre you back in Belgium?
THey @Event Pings and @Middleware & OS get ready for today’s Engineering Hour on message queues and intertask communication in FreeRTOS! It starts in 30 minutes here: https://app.livestorm.co/devheads-community/devheads-weekly-office-hours-1
What questions do you have for Umesh?
What questions do you have for Umesh?
DevHeads IoT Integration Server
PLEASE JOIN AS A SPEAKER IF YOU WANT TO PARTICIPATE IN THE DISCUSSION!Join DevHeads meetups to connect with other DevHeads and riff on a variety of topics for 30-60 minutes. Join here: https:...
FHey guys,it's a pleasure to join your community.I'm embedded system engineer ,want to learn and share experience.
