HHave you ruled out a unstable power supply?
IIt only happens with the 190s though, might not be the power supply
HAre you running TelemFFB?
HAny settings that are different from your other Aircraft?
IYes I use Telem, nothing different than other aircraft
CJust a sudden thought that I should’ve figured out how long an extension this can handle before buying, I’ll be somewhere between 250-300mm I think, will the standard motors work well or am I SOL
IGot 2 motor disconnects while firing the 109 this time.
I[15:37:16.926] * USB Connected
[15:37:17.094] Resetting motors
[15:37:17.095] Motor Y active
[15:37:17.095] Motor X active
[15:37:17.097] Motor Y timeout
[15:37:17.097] Motor X timeout
[15:37:40.173] Config received
[15:38:01.188] Config received
[15:38:10.134] Config received
[15:38:59.636] Reset
[15:38:59.636] FFB_RemoveAllEffects
[15:38:59.638] Stop All Effects
[15:38:59.638] Device Gain: 255
[15:41:41.066] Effect 10 (Spring): Override enable
[15:45:31.721] Effect 9 (Spring): Override enable
[15:46:16.655] Effect 9 (Spring): Override enable
[16:08:00.206] Effect 9 (Spring): Override enable
[16:08:31.952] Effect 9 (Spring): Override enable
[16:09:19.998] Effect 9 (Spring): Override enable
[16:21:09.189] Motor Y timeout
[16:21:09.189] Motor X timeout
[15:37:17.094] Resetting motors
[15:37:17.095] Motor Y active
[15:37:17.095] Motor X active
[15:37:17.097] Motor Y timeout
[15:37:17.097] Motor X timeout
[15:37:40.173] Config received
[15:38:01.188] Config received
[15:38:10.134] Config received
[15:38:59.636] Reset
[15:38:59.636] FFB_RemoveAllEffects
[15:38:59.638] Stop All Effects
[15:38:59.638] Device Gain: 255
[15:41:41.066] Effect 10 (Spring): Override enable
[15:45:31.721] Effect 9 (Spring): Override enable
[15:46:16.655] Effect 9 (Spring): Override enable
[16:08:00.206] Effect 9 (Spring): Override enable
[16:08:31.952] Effect 9 (Spring): Override enable
[16:09:19.998] Effect 9 (Spring): Override enable
[16:21:09.189] Motor Y timeout
[16:21:09.189] Motor X timeout
I
I
I
I
I
I
I
IIs there something wrong with my settings?
SIt says both offline, like they were never online. usually when I get a disconnect it says OVERCURRENT FAULT or something like that
IYes I am getting those since a couple of days ago
I
FIt depends on what you will be using it for and how much force you are wanting to get from it. For my use (mostly jet fighters and dogfights) I have the standard rhino without extensions as a side stick and @SR-FWinger[73]_David monster rhino kit with the stronger 86 motors for extensions as a center stick.
NHi! I recently did a update of both the firmware and the software for my VPFORCE base. Ever since I experience random high force jerks (to the left). In some occasions it overpowers the motor and I need to restart the base. Do anyone else experience the same?
L*Resolved: I will leave this here in the event any one else has a similar issue. For some strange reason there is a conflict between my Razor Tartarus and the Rhino, but only with FS2020. If they are both plugged in FS2020 will black screen on boot. Got a real strange one, FS2020 black screen on boot, only when the Rhino is plugged in. Tried different cables, its now directly plugged into the IO on the mobo. all drivers, BIOS and firmware across the board all updated to the latest. Only seems to be impacting FS2020.
HAt least not obviously. Sorry, I‘m out of ideas currently. Given how the telemetry and TelemFFB with DCS works, I find it unlikely that only specific aircraft crash the Rhino - unless there are settings that causes it. But I don’t know for sure of course. I would still assume some power instability. But I can’t explain why only those air raft are affected.
@walmis or @Number481 will probably have better ideas…..
sorry
@walmis or @Number481 will probably have better ideas…..
sorry
KI would check the wiring. I currently have loose contacts on my Rhino joystick. But I am still looking for the location. It is either the cables on the emergency stop switch or the data cables of the motors on the Rhino mainboard.
IOk will check them out, good idea
WI'll release a new beta firmware revision shortly, I think it should address the motor timeout issue.
HQuestions:
I use fs2020 and have a dedicated H145 sim cockpit.
I use fs2020 and have a dedicated H145 sim cockpit.
- Can the trim release on the rhino be bound to any joystick button not plugged into the base? I use a max flight control which has its own USB controller box.
- 4 axis heli. AP moves the cyclic automatically. Can the Rhino follow that?
N1 - Yes, via the loopback app you can tie any controller to the base for inputs
2 - Yes, all 4 axes are modeled via TelemFFB.
2 - Yes, all 4 axes are modeled via TelemFFB.
HThank you, I'm unfamiliar with the loop back app. Is that inside the vp control software or is it a separate download l?
NGoogle Docs
VPforce RHINO FFB User Manual Version 0.81 (WIP) Table of Contents 1. Welcome 1 2. Getting Started 3 2.1. Technical Specifications 4 2.2. Physical Setup 5 2.2.1. The VKB Adapter 6 2.2.2. The WinWing Adapter 6 2.2.3. The RHINO Throw Limiter Adapters 7 2.3. Initial Connection and Updating ...
HI just read through it. This is perfect since my controller is a vjoy device and I use mobi flight for programming.
SI am getting an error whenever I try to use /info with the VPforceBot. Is the command meant to be used in this server or a DM with the bot?
FIt is ! Info without the space not / and works in both.
SI got this message when trying it with !
Sany ideas?
F!status
VHey @FlatSpin,
So the last Shipped RHINO is #0779 on 2024-11-12
Average waiting time from preorder to shipped is 208 days, median is 210 days, max is 437 days
746 Rhinos are shipped in total
So the last Shipped RHINO is #0779 on 2024-11-12
Average waiting time from preorder to shipped is 208 days, median is 210 days, max is 437 days
746 Rhinos are shipped in total
FMake sure you enter your email after info
SDoes anyone have a good DCS A10 profile? I find that the oscillations often cancel the autopilot. Did mess around with some stuff last night but haven’t had a chance to test yet.
S!status
VHey @SkyPirate17,
So the last Shipped RHINO is #0779 on 2024-11-12
Average waiting time from preorder to shipped is 208 days, median is 210 days, max is 437 days
746 Rhinos are shipped in total
So the last Shipped RHINO is #0779 on 2024-11-12
Average waiting time from preorder to shipped is 208 days, median is 210 days, max is 437 days
746 Rhinos are shipped in total
SSo, with MSFS2024 only days away, is TelemFFB already good to go for MSFS2024, or will my stick go limp on the 19th of November? 
NAnyone had these issues?
FIt would be helpful if you could post screenshots of the configurator tabs when the issue happens. Maybe even make a video too.
Nworked generally fine during the tech alpha last month. AFAIK, it is working generally fine for those rhino owners who may be on development teams and have been participating in the dev alpha. Neither of those are "complete builds" though, so its anyones guess what we'll see on release day.
SJust watch out for the possible “whack f*k!” moments during cutscenes/career menu
NThank you, but I did a reset to factory defaults and adjusted all the settings manually, and it has been working since.
IAnother disconnect
I[13:28:02.426] * USB Connected
[13:28:02.588] Motor X active
[13:28:02.588] Motor X active
[13:29:31.312] Reset
[13:29:31.312] FFB_RemoveAllEffects
[13:29:31.312] Stop All Effects
[13:29:31.314] Device Gain: 255
[13:32:37.618] Effect 9 (Spring): Override enable
[13:41:38.740] Effect 15 (Spring): Override enable
[13:49:12.710] Effect 15 (Spring): Override enable
[13:54:10.167] Effect 15 (Spring): Override enable
[13:54:10.604] Effect 15 (Spring): Override enable
[13:56:38.982] Effect 15 (Spring): Override enable
[13:56:39.403] Effect 15 (Spring): Override enable
[13:56:39.412] Effect 15 (Spring): Override enable
[14:05:59.998] Effect 12 (Spring): Override enable
[14:13:20.786] Effect 12 (Spring): Override enable
[14:17:54.570] Effect 14 (Spring): Override enable
[14:19:58.314] Effect 14 (Spring): Override enable
[14:34:30.956] Effect 14 (Spring): Override enable
[15:05:22.991] Motor Y timeout
[15:05:22.991] Motor X timeout
[15:05:55.906] Reset
[15:05:55.906] FFB_RemoveAllEffects
[15:06:41.002] Config received
[15:06:41.002] Config written to flash
[15:06:41.771] Config received
[13:28:02.588] Motor X active
[13:28:02.588] Motor X active
[13:29:31.312] Reset
[13:29:31.312] FFB_RemoveAllEffects
[13:29:31.312] Stop All Effects
[13:29:31.314] Device Gain: 255
[13:32:37.618] Effect 9 (Spring): Override enable
[13:41:38.740] Effect 15 (Spring): Override enable
[13:49:12.710] Effect 15 (Spring): Override enable
[13:54:10.167] Effect 15 (Spring): Override enable
[13:54:10.604] Effect 15 (Spring): Override enable
[13:56:38.982] Effect 15 (Spring): Override enable
[13:56:39.403] Effect 15 (Spring): Override enable
[13:56:39.412] Effect 15 (Spring): Override enable
[14:05:59.998] Effect 12 (Spring): Override enable
[14:13:20.786] Effect 12 (Spring): Override enable
[14:17:54.570] Effect 14 (Spring): Override enable
[14:19:58.314] Effect 14 (Spring): Override enable
[14:34:30.956] Effect 14 (Spring): Override enable
[15:05:22.991] Motor Y timeout
[15:05:22.991] Motor X timeout
[15:05:55.906] Reset
[15:05:55.906] FFB_RemoveAllEffects
[15:06:41.002] Config received
[15:06:41.002] Config written to flash
[15:06:41.771] Config received
P