FIt would be helpful if you could post screenshots of the configurator tabs when the issue happens. Maybe even make a video too.
Nworked generally fine during the tech alpha last month. AFAIK, it is working generally fine for those rhino owners who may be on development teams and have been participating in the dev alpha. Neither of those are "complete builds" though, so its anyones guess what we'll see on release day.
SJust watch out for the possible “whack f*k!” moments during cutscenes/career menu
NThank you, but I did a reset to factory defaults and adjusted all the settings manually, and it has been working since.
IAnother disconnect
I[13:28:02.426] * USB Connected
[13:28:02.588] Motor X active
[13:28:02.588] Motor X active
[13:29:31.312] Reset
[13:29:31.312] FFB_RemoveAllEffects
[13:29:31.312] Stop All Effects
[13:29:31.314] Device Gain: 255
[13:32:37.618] Effect 9 (Spring): Override enable
[13:41:38.740] Effect 15 (Spring): Override enable
[13:49:12.710] Effect 15 (Spring): Override enable
[13:54:10.167] Effect 15 (Spring): Override enable
[13:54:10.604] Effect 15 (Spring): Override enable
[13:56:38.982] Effect 15 (Spring): Override enable
[13:56:39.403] Effect 15 (Spring): Override enable
[13:56:39.412] Effect 15 (Spring): Override enable
[14:05:59.998] Effect 12 (Spring): Override enable
[14:13:20.786] Effect 12 (Spring): Override enable
[14:17:54.570] Effect 14 (Spring): Override enable
[14:19:58.314] Effect 14 (Spring): Override enable
[14:34:30.956] Effect 14 (Spring): Override enable
[15:05:22.991] Motor Y timeout
[15:05:22.991] Motor X timeout
[15:05:55.906] Reset
[15:05:55.906] FFB_RemoveAllEffects
[15:06:41.002] Config received
[15:06:41.002] Config written to flash
[15:06:41.771] Config received
[13:28:02.588] Motor X active
[13:28:02.588] Motor X active
[13:29:31.312] Reset
[13:29:31.312] FFB_RemoveAllEffects
[13:29:31.312] Stop All Effects
[13:29:31.314] Device Gain: 255
[13:32:37.618] Effect 9 (Spring): Override enable
[13:41:38.740] Effect 15 (Spring): Override enable
[13:49:12.710] Effect 15 (Spring): Override enable
[13:54:10.167] Effect 15 (Spring): Override enable
[13:54:10.604] Effect 15 (Spring): Override enable
[13:56:38.982] Effect 15 (Spring): Override enable
[13:56:39.403] Effect 15 (Spring): Override enable
[13:56:39.412] Effect 15 (Spring): Override enable
[14:05:59.998] Effect 12 (Spring): Override enable
[14:13:20.786] Effect 12 (Spring): Override enable
[14:17:54.570] Effect 14 (Spring): Override enable
[14:19:58.314] Effect 14 (Spring): Override enable
[14:34:30.956] Effect 14 (Spring): Override enable
[15:05:22.991] Motor Y timeout
[15:05:22.991] Motor X timeout
[15:05:55.906] Reset
[15:05:55.906] FFB_RemoveAllEffects
[15:06:41.002] Config received
[15:06:41.002] Config written to flash
[15:06:41.771] Config received
P
PI'm mounting the mod on the Virpil Ace pedals but strangely when I connect and turn on the module it gives me this message
Pwhat could I have done wrong?
P
PSolved , 2 cables was inverted (D- D+)
BQuick question on USB hubs. Im intending using 2 hubs (not daisychained). For everything but the Rhino and my Crosswinds I have a TP link hub that has already served me well. So , For the Rhino and pedals am I better with a USB 3 hub? Does it need to be powered and if, ultimately Im plugging in the crosswinds, the FFB crosswind kit and the Rhino, do I need some overhead in terms of unused ports or will a 4 port hub be fine? Thanks. Noob at all this.
HNo, you don't need more than USB 2.0 for peripherals, and you don't need a powered hub either.
WFrom experience USB3 is usually somewhat better, I've encountered less problems with them. Cheap USB2 hubs often use knockoff chinese chips and are somewhat quirky. YMMV
HQuality is a different concern. It is true (unfortunately) that some hubs work and others don't. I was just talking in principle. It is good advise to go with somewhat reliable brands and don't buy the cheapest one you can get.
HI'm using both, USB 2.0 and USB 3.0 hubs. None is connected to its powersupply though.
HA simple USB 2.0 hub that hasn't let me down so far is the D-Link DUB H4, and a reliable USB 3.0 Hub is this one: https://www.amazon.de/gp/product/B07KFG8PPR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
RSHTECH USB Hub Aktiv 3.0 mit Netzteil, Aluminium USB 3.0 Hub mit 7 USB 3.0 Ports, USB 3.0 Port Verteiler für Datenübertragung mit 10W (5V/2A) Netzteil, RSH-518-2
HI'm using it without the Power-Brick for two Rhino devices and two other input devices.
HThe USB 2.0 Hub runs my TrackIR cam, Keyboard and mouse.
HAlso without Power.
BThanks Hiob and Walmis! Duh - I meant D-link not TP link. I'll look at that RSHtech hub.
VWanted to try the new beta software, but I cant update my firmware, "no compatible devices found". The stick works fine, and connects to vpforce configurator, its running firmware 1.0.16. Tried various browsers, tried USB2 and 3 ports on my motherboard and a USB3 PCIe card. Not sure what else I can do?
Awhat browser is this?
Vthats brave, used to work. I tried edge and chrome too, same result
Akk, yeah, was gonna say, try chrome if you haven't already, unfortunately not sure what's going on, will probably require walmis n co to answer
Vnever mind, reboot solved it somehow!
VOr it didnt. Not entirely. Now it connects but wont upgrade the firmware or detect the current one:
VIts also not detecting stick movements or button presses in the browser UI. If I launch vpforce configurator, that all works with no problems
Vthat did it (after a reboot), thanks!
VOne more question. Max PSU current is for some reason set to 4A. I have the "stock" PSU that came with my rhino, it says 19.5A @19V. Can I just set that PSU current to 19.5A or am I misunderstanding something?
HYou could drive more than one device of certain PSUs, then you need to limit the per device draw. In your case, you can safely put that to 10 Amps. That is more than you will ever need probably.
HI wouldn’t go to the advertised amps though. leave some wiggle room for safety.
Vsounds like a plan. Honestly, even 4A is enough, but I was just curious how far I can drive it.
H4A may(!) become a bottleneck if you pull diagonally and both motors draw maximum power at the same time, Kind of an edge case, but the only scenario I can think of.
HI‘m driving three motors from a 15A PSU and set the Rhino Stick (2 Motors) to 10A and the pedals (1 Motor) to 6A. Pretty unlikely that all three will pull max A at the same time.
H@walmis regarding the current beta of the VP configurator. Don’t know if bug or feature. When you enable the hardware trim and offset the center, it stays offset when you disable the hardware trim again. And another thing I encounter. When opening the VP config, it doesn’t always read and display the current config from the stick without forcing it. With the last release version, that worked reliably as far as I can tell.
PAfter applying all of the recent updates I don’t have any spring forces. Can anyone offer some advice on how to fix this?
P
NPot 1 is assigned to spring gain and set to 3.7%
N
PThanks! How do I change the pot 1 settings? I don’t see instructions on that.
NTurn the black knob on your Rhino
PGot it thanks!
VIm having some issues with oscillations when using software endstops. I think this issue is new in 1.0.17b, but Im not positive. If I move the stick towards the software endstop (with no other forces being active, or master gain to zero) it can induce oscillations, with or without holding the stick. I tried a few things, like low pass and notch filters, but nothing seems to cure it.
V
DOne of my motor wires power looks like it wasn't crimped enough
DIt slid right out when I tried to put the motor in my housing
D
DWhat size JST connector is it?