I would check the wiring. I currently have loose contacts on my Rhino joystick. But I am still looki

I would check the wiring. I currently have loose contacts on my Rhino joystick. But I am still looking for the location. It is either the cables on the emergency stop switch or the data cables of the motors on the Rhino mainboard.

Kkaltokri I would check the wiring. I currently have loose contacts on my Rhino joystick. ...

I/JG7_Moto•11/12/24, 1:21 PM

Ok will check them out, good idea

walmis•11/12/24, 1:50 PM

I'll release a new beta firmware revision shortly, I think it should address the motor timeout issue.

H145Rotor-Sims•11/12/24, 2:24 PM

Questions:
I use fs2020 and have a dedicated H145 sim cockpit.

Can the trim release on the rhino be bound to any joystick button not plugged into the base? I use a max flight control which has its own USB controller box.
4 axis heli. AP moves the cyclic automatically. Can the Rhino follow that?

HH145Rotor-Sims Questions: I use fs2020 and have a dedicated H145 sim cockpit. - Can the trim re...

Number481•11/12/24, 3:25 PM

1 - Yes, via the loopback app you can tie any controller to the base for inputs
2 - Yes, all 4 axes are modeled via TelemFFB.

NNumber481 1 - Yes, via the loopback app you can tie any controller to the base for inputs ...

H145Rotor-Sims•11/12/24, 3:29 PM

Thank you, I'm unfamiliar with the loop back app. Is that inside the vp control software or is it a separate download l?

Number481•11/12/24, 3:34 PM

It's part of the configurator software package... The Rhino Loopback App

Google Docs

VPforce Rhino Manual

VPforce RHINO FFB User Manual Version 0.81 (WIP) Table of Contents 1. Welcome 1 2. Getting Started 3 2.1. Technical Specifications 4 2.2. Physical Setup 5 2.2.1. The VKB Adapter 6 2.2.2. The WinWing Adapter 6 2.2.3. The RHINO Throw Limiter Adapters 7 2.3. Initial Connection and Updating ...

NNumber481 It's part of the configurator software package... [The Rhino Loopback App](http...

H145Rotor-Sims•11/12/24, 4:03 PM

I just read through it. This is perfect since my controller is a vjoy device and I use mobi flight for programming.

SkyPirate17•11/12/24, 4:09 PM

I am getting an error whenever I try to use /info with the VPforceBot. Is the command meant to be used in this server or a DM with the bot?

f14billy•11/12/24, 4:12 PM

It is ! Info without the space not / and works in both.

SkyPirate17•11/12/24, 4:35 PM

I got this message when trying it with !

SkyPirate17•11/12/24, 4:35 PM

any ideas?

FlatSpin•11/12/24, 4:38 PM

!status

FFlatSpin !status

VPforceBot•11/12/24, 4:38 PM

Hey @FlatSpin,
So the last Shipped RHINO is #0779 on 2024-11-12
Average waiting time from preorder to shipped is 208 days, median is 210 days, max is 437 days
746 Rhinos are shipped in total

SSkyPirate17 I got this message when trying it with !

f14billy•11/12/24, 4:46 PM

Make sure you enter your email after info

Swoop•11/12/24, 5:08 PM

Does anyone have a good DCS A10 profile? I find that the oscillations often cancel the autopilot. Did mess around with some stuff last night but haven’t had a chance to test yet.

SkyPirate17•11/12/24, 5:38 PM

!status

SSkyPirate17 !status

VPforceBot•11/12/24, 5:38 PM

Hey @SkyPirate17,
So the last Shipped RHINO is #0779 on 2024-11-12
Average waiting time from preorder to shipped is 208 days, median is 210 days, max is 437 days
746 Rhinos are shipped in total

Sleepy81•11/12/24, 5:58 PM

So, with MSFS2024 only days away, is TelemFFB already good to go for MSFS2024, or will my stick go limp on the 19th of November?

NNiccoSWE Hi! I recently did a update of both the firmware and the software for my VPFORCE...

NiccoSWE•11/12/24, 6:48 PM

Anyone had these issues?

NNiccoSWE Anyone had these issues?

f14billy•11/12/24, 7:19 PM

It would be helpful if you could post screenshots of the configurator tabs when the issue happens. Maybe even make a video too.

SSleepy81 So, with MSFS2024 only days away, is TelemFFB already good to go for MSFS2024, o...

Number481•11/12/24, 7:22 PM

worked generally fine during the tech alpha last month. AFAIK, it is working generally fine for those rhino owners who may be on development teams and have been participating in the dev alpha. Neither of those are "complete builds" though, so its anyones guess what we'll see on release day.

smitty•11/12/24, 7:45 PM

Just watch out for the possible “whack f*k!” moments during cutscenes/career menu

Ff14billy It would be helpful if you could post screenshots of the configurator tabs when ...

NiccoSWE•11/12/24, 10:31 PM

Thank you, but I did a reset to factory defaults and adjusted all the settings manually, and it has been working since.

I/JG7_Moto•11/12/24, 11:07 PM

Another disconnect

I/JG7_Moto•11/12/24, 11:07 PM

[13:28:02.426] * USB Connected
[13:28:02.588] Motor X active
[13:28:02.588] Motor X active
[13:29:31.312] Reset
[13:29:31.312] FFB_RemoveAllEffects
[13:29:31.312] Stop All Effects
[13:29:31.314] Device Gain: 255
[13:32:37.618] Effect 9 (Spring): Override enable
[13:41:38.740] Effect 15 (Spring): Override enable
[13:49:12.710] Effect 15 (Spring): Override enable
[13:54:10.167] Effect 15 (Spring): Override enable
[13:54:10.604] Effect 15 (Spring): Override enable
[13:56:38.982] Effect 15 (Spring): Override enable
[13:56:39.403] Effect 15 (Spring): Override enable
[13:56:39.412] Effect 15 (Spring): Override enable
[14:05:59.998] Effect 12 (Spring): Override enable
[14:13:20.786] Effect 12 (Spring): Override enable
[14:17:54.570] Effect 14 (Spring): Override enable
[14:19:58.314] Effect 14 (Spring): Override enable
[14:34:30.956] Effect 14 (Spring): Override enable
[15:05:22.991] Motor Y timeout
[15:05:22.991] Motor X timeout
[15:05:55.906] Reset
[15:05:55.906] FFB_RemoveAllEffects
[15:06:41.002] Config received
[15:06:41.002] Config written to flash
[15:06:41.771] Config received

Piola•11/13/24, 2:00 PM

Piola•11/13/24, 2:00 PM

I'm mounting the mod on the Virpil Ace pedals but strangely when I connect and turn on the module it gives me this message

Piola•11/13/24, 2:01 PM

what could I have done wrong?

Piola•11/13/24, 2:07 PM

Piola•11/13/24, 7:30 PM

Solved , 2 cables was inverted (D- D+)

BOO•11/14/24, 9:14 AM

Quick question on USB hubs. Im intending using 2 hubs (not daisychained). For everything but the Rhino and my Crosswinds I have a TP link hub that has already served me well. So , For the Rhino and pedals am I better with a USB 3 hub? Does it need to be powered and if, ultimately Im plugging in the crosswinds, the FFB crosswind kit and the Rhino, do I need some overhead in terms of unused ports or will a 4 port hub be fine? Thanks. Noob at all this.

BBOO Quick question on USB hubs. Im intending using 2 hubs (not daisychained). For ev...

Hiob•11/14/24, 11:43 AM

No, you don't need more than USB 2.0 for peripherals, and you don't need a powered hub either.

walmis•11/14/24, 12:00 PM

From experience USB3 is usually somewhat better, I've encountered less problems with them. Cheap USB2 hubs often use knockoff chinese chips and are somewhat quirky. YMMV

Wwalmis From experience USB3 is usually somewhat better, I've encountered less problems ...

Hiob•11/14/24, 12:04 PM

Quality is a different concern. It is true (unfortunately) that some hubs work and others don't. I was just talking in principle. It is good advise to go with somewhat reliable brands and don't buy the cheapest one you can get.

Hiob•11/14/24, 12:06 PM

I'm using both, USB 2.0 and USB 3.0 hubs. None is connected to its powersupply though.

Hiob•11/14/24, 12:08 PM

A simple USB 2.0 hub that hasn't let me down so far is the D-Link DUB H4, and a reliable USB 3.0 Hub is this one: https://www.amazon.de/gp/product/B07KFG8PPR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

RSHTECH USB Hub Aktiv 3.0 mit Netzteil, Aluminium USB 3.0 Hub mit 7...

RSHTECH USB Hub Aktiv 3.0 mit Netzteil, Aluminium USB 3.0 Hub mit 7 USB 3.0 Ports, USB 3.0 Port Verteiler für Datenübertragung mit 10W (5V/2A) Netzteil, RSH-518-2

Hiob•11/14/24, 12:09 PM

I'm using it without the Power-Brick for two Rhino devices and two other input devices.

Hiob•11/14/24, 12:10 PM

The USB 2.0 Hub runs my TrackIR cam, Keyboard and mouse.

Hiob•11/14/24, 12:10 PM

Also without Power.

BOO•11/14/24, 2:52 PM

Thanks Hiob and Walmis! Duh - I meant D-link not TP link. I'll look at that RSHtech hub.

Vertigo (VIV)•11/14/24, 9:28 PM

Wanted to try the new beta software, but I cant update my firmware, "no compatible devices found". The stick works fine, and connects to vpforce configurator, its running firmware 1.0.16. Tried various browsers, tried USB2 and 3 ports on my motherboard and a USB3 PCIe card. Not sure what else I can do?

amadeus•11/14/24, 9:33 PM

what browser is this?

Vertigo (VIV)•11/14/24, 9:34 PM

thats brave, used to work. I tried edge and chrome too, same result

amadeus•11/14/24, 9:34 PM

kk, yeah, was gonna say, try chrome if you haven't already, unfortunately not sure what's going on, will probably require walmis n co to answer

Vertigo (VIV)•11/14/24, 9:36 PM

never mind, reboot solved it somehow!

Vertigo (VIV)•11/14/24, 9:39 PM

Or it didnt. Not entirely. Now it connects but wont upgrade the firmware or detect the current one:

Vertigo (VIV)•11/14/24, 10:02 PM

Its also not detecting stick movements or button presses in the browser UI. If I launch vpforce configurator, that all works with no problems

VVertigo (VIV)Its also not detecting stick movements or button presses in the browser UI. If I...

Number481•11/14/24, 10:07 PM

try this... 🧰support

NNumber481 try this... https://discord.com/channels/965234441511383080/968208779084701716/1...

Vertigo (VIV)•11/14/24, 10:22 PM

that did it (after a reboot), thanks!

Vertigo (VIV)•11/14/24, 10:30 PM

One more question. Max PSU current is for some reason set to 4A. I have the "stock" PSU that came with my rhino, it says 19.5A @19V. Can I just set that PSU current to 19.5A or am I misunderstanding something?

I would check the wiring. I currently have loose contacts on my Rhino joystick. But I am still looki

Similar Threads

Similar Threads

Similar Threads