DevHeads IoT Integration Server•14mo ago

Otherwise I have been working to get Google fast pair service to work on top of my firmware.

Otherwise
I have been working to get Google fast pair service to work on top of my firmware.

Mmelta101 A person left the company and his stuffs were handed off to me But here's the c...

ZacckOsiemo•11/14/24, 4:51 AM

as long as it is C a win is a win

Mmelta101 Otherwise I have been working to get Google fast pair service to work on top of...

ZacckOsiemo•11/14/24, 4:52 AM

Break down the issue here for us I'm sure if someone knew the specific issue they might have an idea of how to help or maybe even where to go looking

Mmelta101 Otherwise I have been working to get Google fast pair service to work on top of...

ZacckOsiemo•11/14/24, 4:54 AM

ZZacckOsiemo Break down the issue here for us I'm sure if someone knew the specific issue the...

melta101OP•11/14/24, 4:54 AM

Actually while digging
I found out that Google itself will help you to integrate it to the platform
As it's a part of GCP, and if the chip is one of the associated partners like Qualcomm and B&O, they provide sample+engg support

melta101OP•11/14/24, 4:54 AM

Will drop here if I have any prob tho!

Mmelta101 Actually while digging I found out that Google itself will help you to integrat...

ZacckOsiemo•11/14/24, 4:55 AM

Ah the old switch and bait. Read the code of someone who has done it

ZZacckOsiemo Ah the old switch and bait. Read the code of someone who has done it

melta101OP•11/14/24, 4:56 AM

As long as the work gets done and it work..

melta101OP•11/14/24, 4:57 AM

Was thinking of contributing to west in weekend

melta101OP•11/14/24, 4:57 AM

If I get some time

melta101OP•11/14/24, 4:58 AM

I want to add a custom runner to it so we can debug/flash devices that uses rproc

Ttechielew What is your training for? General control?

aymen ammari•11/14/24, 5:01 AM

Yes sir

ZZacckOsiemo lol wait that cool so many degrees of freedom! At the start of the video I thou...

aymen ammari•11/14/24, 5:03 AM

Lol that's just a comparator as we name it, it's just a measurement tool

Aaymen ammari Lol that's just a comparator as we name it, it's just a measurement tool

ZacckOsiemo•11/14/24, 5:03 AM

typical of me I'm more impressed by the instrumentation than the thing itself.

aymen ammari•11/14/24, 5:05 AM

You know that it mesures 0.01 mm

aymen ammari•11/14/24, 5:05 AM

Isn't that amazing?

Aaymen ammari You know that it mesures 0.01 mm

ZacckOsiemo•11/14/24, 5:22 AM

how big is that compared to a micron

aymen ammari•11/14/24, 6:15 AM

10 times I think

Aaymen ammari 10 times I think

ZacckOsiemo•11/14/24, 7:43 AM

Even my father in law would be impressed.

melta101OP•11/14/24, 8:24 AM

zephyr is planning to introduce a multimedia framework like gstreamer but way leaner

melta101OP•11/14/24, 8:25 AM

it's currently being discussed in the arch WG of zephyr

Mmelta101 it's currently being discussed in the arch WG of zephyr

ZacckOsiemo•11/14/24, 8:29 AM

thank you so much for the heads up could yoy share a link to the thread

Mmelta101 it's currently being discussed in the arch WG of zephyr

ZacckOsiemo•11/14/24, 8:31 AM

found it https://github.com/zephyrproject-rtos/zephyr/wiki/Architecture-Working-Group

GitHub

Architecture Working Group

Primary Git Repository for the Zephyr Project. Zephyr is a new generation, scalable, optimized, secure RTOS for multiple hardware architectures. - zephyrproject-rtos/zephyr

ZZacckOsiemo found it https://github.com/zephyrproject-rtos/zephyr/wiki/Architecture-Working-...

melta101OP•11/14/24, 8:32 AM

look into minutes
12 Nov

Mmelta101 look into minutes 12 Nov

ZacckOsiemo•11/14/24, 8:33 AM

ok going to
Look at it are you keen on working on it ?

ZZacckOsiemo ok going to Look at it are you keen on working on it ?

melta101OP•11/14/24, 8:35 AM

i use gstreamer and kvs daily at this point
so its intriguing and worth the explore
plus it will benefit if i could contribute to it,
Ti K3, and AMD dev boards would help a lot with it

melta101OP•11/14/24, 8:36 AM

imagine doing DSP and streaming stuffs in Zephyr
transporting it to Linux for ML jargon

melta101OP•11/14/24, 8:38 AM

I'm all in the hype train for OpenAMP

Mmelta101 imagine doing DSP and streaming stuffs in Zephyr transporting it to Linux for ML...

ZacckOsiemo•11/14/24, 8:40 AM

why not

Marvin•11/14/24, 8:45 AM

gone will be the days of sending a jpeg every other millisecond to achieve a poor man's stream.

MMarvin gone will be the days of sending a jpeg every other millisecond to achieve a poo...

ZacckOsiemo•11/14/24, 9:06 AM

What about a perfomant man’s stream

ZZacckOsiemo What about a perfomant man’s stream

melta101OP•11/14/24, 9:51 AM

most video encoder involve a method to find the difference between 2 frames and then send it

melta101OP•11/14/24, 9:53 AM

imagine the BW needed if we send a saperate jpeg everytime

Mmelta101 most video encoder involve a method to find the difference between 2 frames and ...

ZacckOsiemo•11/14/24, 10:52 AM

this is basically a compression algorithm

ZZacckOsiemo this is basically a compression algorithm

melta101OP•11/14/24, 10:55 AM

it is

vinii2508•11/14/24, 12:34 PM

Guys, im using node-red with node-red-contrib-opcua palette, when i use the addFolder command, gives error, somebody knows something about?

Vvinii2508 Guys, im using node-red with node-red-contrib-opcua palette, when i use the addF...

ZacckOsiemo•11/14/24, 12:48 PM

Usually when you want to get help you show what error it is you are facing, as it is your question is too broad to even tackle and likely people can't help.

ZZacckOsiemo Usually when you want to get help you show what error it is you are facing, as i...

vinii2508•11/14/24, 4:14 PM

the error is error:error

Vvinii2508 the error is error:error

ZacckOsiemo•11/14/24, 4:27 PM

You need to dig further. Does your documentation mention this error?

segfaultdev.elf•11/14/24, 4:30 PM

have anyone used CAN before? I was planning to make two devices talk via CAN and taking ADC read from one and writing that into pwm for controlling a servo on the other end
when it works fine Maybe I can Replace the ADC end with pure angular value then I can simulate the car steering workings

Ssegfaultdev.elf have anyone used CAN before? I was planning to make two devices talk via CAN and...

techielew•11/14/24, 5:23 PM

@Umesh Lokhande I think you have some CAN experience, no?

Ttechielew @Umesh Lokhande I think you have some CAN experience, no?

Umesh Lokhande•11/14/24, 5:47 PM

Yes, long back I wrote code to connect the CAN module from Sparkfun with Car's OBD port to read real live data. Here's a video https://www.linkedin.com/embed/feed/update/urn:li:ugcPost:6970616461518123008?compact=1

UUmesh Lokhande Yes, long back I wrote code to connect the CAN module from Sparkfun with Car's O...

melta101OP•11/14/24, 6:33 PM

Damn,
That's amazing

UUmesh Lokhande Yes, long back I wrote code to connect the CAN module from Sparkfun with Car's O...

techielew•11/14/24, 10:52 PM

So what's your question @Undefined? Whether it's possible to simulate steering?

Ttechielew So what's your question @Undefined? Whether it's possible to simulate steering?

segfaultdev.elf•11/15/24, 4:40 AM

no I will implement it. is it relevant?

segfaultdev.elf•11/15/24, 4:42 AM

i’m at learning stage of CAN

Ssegfaultdev.elf i’m at learning stage of CAN

ZacckOsiemo•11/15/24, 6:09 AM

You still asking, this could be done .

aymen ammari•11/15/24, 7:26 AM

Hi Devs, today we visited manipulator robots factory, and the one that impressed me the most is this one welding robot with AI cameras wich detects the object that you wanna weld
What do you think about that

Aaymen ammari Hi Devs, today we visited manipulator robots factory, and the one that impressed...

ZacckOsiemo•11/15/24, 7:42 AM

can you please find out how many computers are used here, like gpos plus rtos systems

ZZacckOsiemo can you please find out how many computers are used here, like gpos plus rtos sy...

melta101OP•11/15/24, 7:48 AM

The industrial hand manipulator I have seen normally run by plc and a CPU

Mmelta101 The industrial hand manipulator I have seen normally run by plc and a CPU

ZacckOsiemo•11/15/24, 8:32 AM

ah that makes sense n

Otherwise I have been working to get Google fast pair service to work on top of my firmware.

Similar Threads

Similar Threads

Similar Threads