and how do i reopen the curves tool to edit a path?
and how do i reopen the curves tool to edit a path?
AThaty was perfect. I wish there was a way to bookmark posts in discord, so I could save that one. thanks!
Banyone know how to make a frozen lake?
Bbut not totally frozen - water in the middle
AProbably some sort of plane with an ice material and subsurf, then just boolean out the middle or cut it out so it looks like broken ice
AMight need a lil bit of blender for that
DNo idea regarding a landscape, it is on our to-do list but no idea when we will get around to it. But in the Dash 1.8.5 beta, we actually shipped this feature for our own terrain tool, in case you are interested in that instead 
DTo re-edit a curve, have it selected and then start the draw mode again 
DNot super good here, but perhaps you could use Megascans and the Blend Material. It has a layer for Puddle and for Snow (and rain) which you could use to create a frozen lake, ish
Bnot bad sire!!!
Byou do need an Ultrad Dynamic Weather Integration!!
DThanks 
That would be cool yee! We do have some plans for further weather/material/atmospheric tools :xddtanec:
That would be cool yee! We do have some plans for further weather/material/atmospheric tools :xddtanec:
DNothing planned no
We do have our 50% discount for the first 3 months on the freelance plan though
We do have our 50% discount for the first 3 months on the freelance plan though
DNot entirely sure what you mean, but if you need to "project/align" the path scatter to the surface beneth, we have Projection Mask down in the Feature Maskin section. And regarding the Fit mode, it is an option under the Density Mode at the top I hope this helps!
I hope this helps!
AI'm trying to do some test with your "blend material" master material. In the attached screenshot you can see an instance I've created.
As your blend material works with displacement map from quixel surfaces (quixel old) I was expecting the ORD slot.
Where to load AO and Displacement textures?
EDIT: the roughness channel is the ORD? I've opened the material instance created with Dash tools and it seems to be there, right?
As your blend material works with displacement map from quixel surfaces (quixel old) I was expecting the ORD slot.
Where to load AO and Displacement textures?
EDIT: the roughness channel is the ORD? I've opened the material instance created with Dash tools and it seems to be there, right?
AThe same material applied with single material (on the left) and with blend material (on the right, is the same as the base one of the 3, no changes applied).
Why they look slightly different? (the one on the right is darker and greenish)
Why they look slightly different? (the one on the right is darker and greenish)
OHi ! I'm very interested by the perpetual license ! But i do have one last question : it's a lifetime license but you don't have any update after 1 year ? If so, is the tool still available and usable ?
Thanks for your answers and for this amazing tool
Thanks for your answers and for this amazing tool
DHey hey @otsoa Happy to hear you are interested in Dash 
The perpetual license comes with 12 months of updates, after that, you can either buy another 12 months of updates (price undecided right now, but it will be in line with how others in the industry price it) or you can continue using whatever version of Dash was the latest when your 12 months run out. Perhaps it will be Dash 2.5, then you have forever access to Dash 2.5 yes!
Happy to hear you are interested in Dash The perpetual license comes with 12 months of updates, after that, you can either buy another 12 months of updates (price undecided right now, but it will be in line with how others in the industry price it) or you can continue using whatever version of Dash was the latest when your 12 months run out. Perhaps it will be Dash 2.5, then you have forever access to Dash 2.5 yes!
DI ain't that good with landscape workflows, but I think you could use Landscape Layers and paint that path perhaps. A bit like we did in this video: https://docs.polygonflow.io/advanced/release-notes/dash-1.7.0#landscape-layer-masking
Otherwise, you could scatter decals (Decal Scatter), or some ground meshes (Path Scatter), or use the Road Tool in Dash. For me that would be easier, but ofc this also means you are adding assets which you maybe don't want
Otherwise, you could scatter decals (Decal Scatter), or some ground meshes (Path Scatter), or use the Road Tool in Dash. For me that would be easier, but ofc this also means you are adding assets which you maybe don't want
RHi,
Yes the Roughness channel is the ORD
Yes the Roughness channel is the ORD
BWhy when i do a physics drop do things fall through the landscape?
DWe had a convo about this with another user before, and the conclusion there was that most likely it is due to the objects being scattered being so small so they don't work well with the landscape collision and we have not found a solution yet to this 
dash-generalLandscape Physics falling through
Do you think it may be a similar issue for you?
dash-generalLandscape Physics falling throughDo you think it may be a similar issue for you?
Bwell it was a boat!
Bso not tiny
B@Daniel - COO
BOk funkiest way to make dash your complete asset manager!
I have a huge project using lots of assets from different asset packs - so dash took a little bit of time to load. I came up with this process - time consuming and uses disk space but in long term a lifesaver.
I have a huge project using lots of assets from different asset packs - so dash took a little bit of time to load. I came up with this process - time consuming and uses disk space but in long term a lifesaver.
- Create a Folder for all of your Assets Packs from FAB to live in
- Install each Asset pack into a seperate project - Categorize Sub folders if you wish in the project and shuffle things in this project to match your way of working (eg move Static Meshes into a particular folder etc according to your general way of working)
- Open Each Project and Scan and Tag with Dash after you have done this
- Now in main project you can open dash preferences and choose which asset pack you want to work with and bring in any assets which will have the folder structure from the asset pack you set up
AThis is a fun trick! the external content browser support is really underutilized, and it's by far one of the best features of Dash's content browser imho!
In the future, I hope we can just make the process of loading 10K-60K+ assets much more streamlined, without bloating your projects either.
the external content browser support is really underutilized, and it's by far one of the best features of Dash's content browser imho!In the future, I hope we can just make the process of loading 10K-60K+ assets much more streamlined, without bloating your projects either.
AI would love to have control more like this on the landscape shaping. So not only height, but limiting how high it goes (so you get plateaus, and how low it can go so you get flat land. And them being able to control the Z lift to create craters.
AI can imagine the terrain deformers to have another spline on the sides to spawn in rocks and cliffs hehe
D100%! Combining terrain tool with path scatter in a compound like that would give cool results!
DHey! Welcome!
We don't have any Dash tutorial covering a really big world no, but here are two videos that can be worth checking and also our docs:
We don't have any Dash tutorial covering a really big world no, but here are two videos that can be worth checking and also our docs:
- Getting started video: https://youtu.be/RA3yGbCvxIU?si=l7-kI26knfdLET3a
- Our most detailed and biggest tutorial: (older UI though): https://youtu.be/kJhqc5_6usc?si=vZ-r5uMLDECD7ZTf
- Docs: https://docs.polygonflow.io/getting-started/quickstart
YouTubePolygonflow Dash
Dash 1.8 is finally here! It has an Updated UI, Blend Material with Snow and Rain Support, World-Class Documentation, Revamped Curve-Based Tools, an AI Assistant, and much more!
This new version of Dash makes world-building in Unreal Engine 5 easier than ever before and in this video, we show you how!
Try Dash for FREE: https://www.polygonflo...
This new version of Dash makes world-building in Unreal Engine 5 easier than ever before and in this video, we show you how!
Try Dash for FREE: https://www.polygonflo...
YouTubePolygonflow Dash
In this comprehensive 79-minute Dash tutorial, we dive deep into the entire process of creating a Helldivers 2 game environment in Unreal Engine 5. Whether you're a beginner or a seasoned UE5 user, this full guide provides detailed insights and techniques to help you master environment creation with the help of Dash.
You can find all the asset...
You can find all the asset...
DAlmost like that yes! You would need all your assets added to a UE project, and then Dash can compute them in there, then you would have access to search and use them from other UE projects!
DHey @nolanlarsont No not possible right now. In order for Dash to see and to be able to compute the assets, you need to add them to a UE project. But you could crease a "assets" UE project, add the assets there, compute them, and then you get a similar experience as you described as you can search and use those assets in other UE projects without manually importing them
No not possible right now. In order for Dash to see and to be able to compute the assets, you need to add them to a UE project. But you could crease a "assets" UE project, add the assets there, compute them, and then you get a similar experience as you described as you can search and use those assets in other UE projects without manually importing them 
DWith our "Draw Curve" tool, it does exactly this, you draw a curve that aligns to the surface below! And if you already have curves, we have a "project curves" tool
And if you already have curves, we have a "project curves" tool Bhowdy all! Does anyone use Brushify as their landscape material - i am looking for a copy of the renderer settings from a config file - quality of my viewport is poo - yup its on epic
