I used the graphql api with this data to query the cpu time for October and it doesn't match my bill

I used the graphql api with this data to query the cpu time for October and it doesn't match my billing data, what is the reason for this?

Hakemo•12/1/24, 12:16 PM

yo i have manged to get cloudflare workers to be written in gleam language because it can compile to js

i am currently looking for ideas on what to do with it i have seen people make oauth login with it was really cool

MMetaSky I used the graphql api with this data to query the cpu time for October and it d...

Walshy•12/1/24, 12:17 PM

Well this is literally today only not October. You can see the date, it's a month to date total.

Dec 1 - Dec 1

gilxng•12/1/24, 2:30 PM

Hi @Walshy, I got question regarding the workers ai and vectorize, I have an app running Resnet50 to vectorize image, I'm planning to switch over to cloudflare since you guys support Resnet50, however, I saw the limitiations of the Vectorize it says it has maximum dimensions per vector 1536 dimensions, which is not high enough for my app since it generate 2048 dimensions using Resnet50, any idea how can I reduce the dimensions the is generated from Resnet50?

I'm really new to this field, so any help would be awesome, thanks!

Cloudflare Docs

Limits · Vectorize

The following limits apply to accounts, indexes and vectors (as specified):

Walshy•12/1/24, 2:31 PM

You said a lot of words I don't know haha

Walshy•12/1/24, 2:31 PM

I'd recommend asking in #vectorize
I'm not an AI engineer

gilxng•12/1/24, 2:31 PM

Sure, thanks @Walshy

Dosha•12/1/24, 4:40 PM

How do i manage .env.vars in monorepo, such that i can do wrangler -e ../../.env.vars

Dosha•12/1/24, 4:41 PM

basically i want 4 different workers packages to use the same .env.vars

WWalshy Well this is literally today only not October. You can see the date, it's a mont...

MetaSkyOP•12/1/24, 8:11 PM

I am using this approach, modifying the date query. I used this general method to look up the cpu time for my November bill and it matched, but not for October.

MMetaSky I am using this approach, modifying the date query. I used this general method t...

1984 Ford Laser•12/1/24, 10:40 PM

The datetime filter in the second image is in the middle of a billing period. Do something like Oct1 to Oct30 or something to see that month. If you have not a whole month of usage, it will only be the portion of the month you were using

11984 Ford Laser The datetime filter in the second image is in the middle of a billing period. Do...

MetaSkyOP•12/1/24, 10:52 PM

If the billing period is Sep 12 - Oct 11，What parameters should I use?

1984 Ford Laser•12/1/24, 10:53 PM

Do you have any other invoices for September or October?

MetaSkyOP•12/1/24, 10:54 PM

Yes,

MetaSkyOP•12/1/24, 10:55 PM

I started using workers on September 12th.

MetaSkyOP•12/1/24, 11:00 PM

change parameter also not match the cpu time bill data.

MetaSkyOP•12/1/24, 11:02 PM

The difference is nearly tenfold，So I'm wondering if there's been a change in the cpu time calculation strategy.

MMetaSky The difference is nearly tenfold，So I'm wondering if there's been a change in th...

Isaac McFadyen•12/1/24, 11:05 PM

The bill is milliseconds (

ms

ms

) and the GraphQL query is microseconds (

us

us

) so that would account for the 10x difference.

IIsaac McFadyen The bill is milliseconds (`ms`) and the GraphQL query is microseconds (`us`) so ...

MetaSkyOP•12/1/24, 11:08 PM

i think 1ms = 1000us, I've excluded it in the picture above

MMetaSky i think 1ms = 1000us, I've excluded it in the picture above

Isaac McFadyen•12/1/24, 11:08 PM

Yeah sorry, I think you're right

Isaac McFadyen•12/1/24, 11:08 PM

As in, those numbers do line up, it's just that they're in different formats

IIsaac McFadyen As in, those numbers do line up, it's just that they're in different formats

MetaSkyOP•12/1/24, 11:09 PM

So how do you explain the tenfold difference in cpu time? I think they are both in ms, is there any difference in format?

MetaSkyOP•12/1/24, 11:24 PM

If the cpu time calculation is increased by a factor of 10, then this reflects a 10-fold increase in the amount of cpu time for the November billing.

MMetaSky If the cpu time calculation is increased by a factor of 10, then this reflects a...

Isaac McFadyen•12/1/24, 11:43 PM

You seem to have it the wrong way around? The 6 524 number is what you're being billed for while the 61 442 number is from GraphQL, so if anything, you're being billed 10x less than what GraphQL shows?

IIsaac McFadyen You seem to have it the wrong way around? The 6 524 number is what you're being ...

MetaSkyOP•12/1/24, 11:45 PM

this is my September bill data, use this method the October and November bill data will increase 10x

MMetaSky this is my September bill data, use this method the October and November bill da...

Isaac McFadyen•12/1/24, 11:48 PM

If the mismatch is present in September there's no reason to think it won't also be in October/November. Nothing has changed regarding pricing of Workers so if there is a mismatch I'd expect it's either an issue in the billing system (possible, billing system has been undergoing some changes recently) or an issue with the query.

D5•12/1/24, 11:51 PM

Is it possible to set some limits on workers executions or spending so I don't get a big bill?

D5•12/1/24, 11:52 PM

Oh, seems not

D5•12/1/24, 11:52 PM

Sad, another amazing service I can't use due to that

IIsaac McFadyen If the mismatch is present in September there's no reason to think it won't also...

MetaSkyOP•12/1/24, 11:53 PM

price not change, but the cpu time 10x, the total price of bill data increased 10x in my invoice

MMetaSky price not change, but the cpu time 10x, the total price of bill data increased 1...

Isaac McFadyen•12/1/24, 11:58 PM

What I'm wondering is if the actual billing data increased by 10x on your invoice, or if it's just a mismatch between GraphQL and the invoice? From the screenshot you sent it looks like it didn't for September, did you observe this for October or November?

IIsaac McFadyen What I'm wondering is if the actual billing data increased by 10x on your invoic...

MetaSkyOP•12/2/24, 12:18 AM

Yes, I'll send it out later.

IIsaac McFadyen What I'm wondering is if the actual billing data increased by 10x on your invoic...

MetaSkyOP•12/2/24, 1:51 AM

Cpu Time actual billing data did increase by a factor of 10，the amount of users and code remains largely unchanged

MMetaSky Cpu Time actual billing data did increase by a factor of 10，the amount of users ...

1984 Ford Laser•12/2/24, 1:55 AM

I'd be interested to see if you could figure out an average CPU MS per invocation in September then October to compare, see if each instance is using roughly 10x or if theres some small amount of instances hogging time

11984 Ford Laser I'd be interested to see if you could figure out an average CPU MS per invocatio...

MetaSkyOP•12/2/24, 2:01 AM

ok, i will try it

11984 Ford Laser I'd be interested to see if you could figure out an average CPU MS per invocatio...

MetaSkyOP•12/2/24, 2:25 AM

My worker's script in September is deleted and I redeployed the worker scripts in October, so i can't compare with September and October. So the cpu time calculation issue I mentioned before is just a presentation issue and won't affect my bill amount, is that what you mean?

MetaSkyOP•12/2/24, 3:21 AM

If I deploy workerd to the server by myself, can I do performance test for cpu time and request?

GitHub

GitHub - cloudflare/workerd: The JavaScript / Wasm runtime that pow...

The JavaScript / Wasm runtime that powers Cloudflare Workers - cloudflare/workerd

sodepr•12/2/24, 4:33 AM

Hi fork,

Does anyone test static assets with Worker?

The document said that:

Requests to static assets are free and unlimited.

Requests to static assets are free and unlimited.

However, when I accessed the static assets, it increased the

Requests today

Requests today

immediately.

Ssodepr Hi fork, Does anyone test static assets with Worker? The document said that: `...

Isaac McFadyen•12/2/24, 4:51 AM

?channel-crossposting

SuperHelpflare•12/2/24, 4:51 AM

Please do not post your question in multiple channels/post it multiple times per the rules at #

welcome-and-rules. It creates confusion for people trying to help you and doesn't get your issue or question solved any faster.

IIsaac McFadyen ?channel-crossposting

sodepr•12/2/24, 4:53 AM

No, I ask the question for this channel, and give a suggestion in the suggestion feature channel

Ssodepr No, I ask the question for this channel, and give a suggestion in the suggestion...

Isaac McFadyen•12/2/24, 4:55 AM

Does cloudflare support the cache to prevent call worker everytime?

You asked this in #workers-feature-suggestions. Please try and keep conversations to one channel to avoid confusion for people trying to help.

IIsaac McFadyen > Does cloudflare support the cache to prevent call worker everytime? You asked ...

sodepr•12/2/24, 4:56 AM

Ok, thank you ^^

MMetaSky If I deploy [workerd](https://github.com/cloudflare/workerd) to the server by my...

1984 Ford Laser•12/2/24, 5:31 AM

Im pretty sure the runtime is specifically built to not be able to accurately measure time for functions beyond when I/O occurs

thols•12/2/24, 8:14 AM

Hi guys , new to hono and cloudflare , while implementing rate limit to hono and deploying in cloudflare , i am facing an issue ! this is what i used : https://www.npmjs.com/package/@hono-rate-limiter/cloudflare , and i attached the issue , i am already created a KV and set the namespace id ! the ratelimiting works good in local but not in deployment why , what am i missing ? and also added the kv namespace binding in the CF dashboard

npm

@hono-rate-limiter/cloudflare

. Latest version: 0.2.1, last published: 3 months ago. Start using @hono-rate-limiter/cloudflare in your project by running npm i @hono-rate-limiter/cloudflarenpm i @hono-rate-limiter/cloudflare. There is 1 other project in the npm registry using @hono-rate-limiter/cloudflare.

Original message was deleted

thols•12/2/24, 8:22 AM

yeah , i think i get it now , but can you pls clarrify this -> for this rate limiting i have to create a KV right , but when i create a KV , it gives the alhpa numeric value which i used in the wrangler.toml file

Original message was deleted

thols•12/2/24, 8:26 AM

oh sry for that , can use pls explain what to do next to implement ratelimiting ? what i done till now is , the local setup - which is working fine ! what to do to make this work in the deployment ?

akashra•12/2/24, 9:34 AM

What is the generally accepted mechanism for having sessions written and looked up when using cloudflare Workers? The solutions I've come across seem to suggest using either KV or D1, but at 1 million and 50m requests or writes/month, of which you would then need at least one for every single worker call, that seems like it could quickly eat in usage.

akashra•12/2/24, 9:44 AM

Ugh, I somehow left out a rather critical/important word from that paragraph lol.

Omar Abid•12/2/24, 9:44 AM

I am trying to figure out the pricing structure of WebSockets and DO. I got WebSockets working on a "normal" worker and say the cost is 3.75GB/s. Now, I pass the WebSocket connection to a DO, for the same time interval, I get billed 0.29GB/s. I am not using Hibernation, yet; so I guess my questions is, is DO priced differently to workers and is this just for WebSockets?

Original message was deleted

akashra•12/2/24, 9:50 AM

Yeah, not for anything more than a tiny amount of data.

I used the graphql api with this data to query the cpu time for October and it doesn't match my bill

Similar Threads

Similar Threads

Similar Threads