Anyone here mount the Rhino to the Monstertech flight chair? Got mine put together today and am runn
Anyone here mount the Rhino to the Monstertech flight chair? Got mine put together today and am running into constant issues with the Rhino mount
TBefore you crash hit the Oh shit button!
Err I mean E stop
Err I mean E stop
T
TSo first you pull this and then you smash the E stop
HReduce the effect intensity/gain for the deceleration! Or the constant force gain in VP config.
H@Number481 I don't now the values from the top of my head, but maybe the default gain for decel. should be a bit lower....... You know, protect poeple from themselves. 
(....or protect the Rhino from the sim... 
)
(....or protect the Rhino from the sim... )
V:package: 
RHINO #0810 Has Shipped!
RHINO #0810 Has Shipped!V:package: RHINO #0809 Has Shipped!
RHINO #0809 Has Shipped!
DYeah in the past a
I had this (now I have a MTS frame but globally similar). How can I help ?
I had this (now I have a MTS frame but globally similar). How can I help ?
MHello guys
How long would shipping go, when I order 4?
How long would shipping go, when I order 4?
Ashipping is generally in about 2-3 weeks tops depending on where you are in the world, the bigger issue is the waitlist which if you sign up now, will take a bit
MHow long should I expect?
S!status
VHey @smitty,
So the last Shipped RHINO is #0809 on 2024-12-02
Average waiting time from preorder to shipped is 209 days, median is 210 days, max is 437 days
773 Rhinos are shipped in total
So the last Shipped RHINO is #0809 on 2024-12-02
Average waiting time from preorder to shipped is 209 days, median is 210 days, max is 437 days
773 Rhinos are shipped in total
TSorry, went to reply to this a few times but the day got away from me. Looks like the documentation I was using was outdated or something. Using the correct screws helps. Just got it mounted and am happy with the way it looks at first. Did you have any degredation issues or problems with the bolts loosening? Or was it pretty solid during your time using it?
DDon't worry, there's plenty of time to answer 
.
I had no trouble mounting it. I had taken the MTS support for the Rhino and no problems after the first few uses. Now I've had the Rhino for 7 months and it's holding perfectly. I'm sure I'll have to tighten the screws in a few months, but everything's holding! I've put some photos in the "showcase" sub-section, so you should be able to find them easily.
. I had no trouble mounting it. I had taken the MTS support for the Rhino and no problems after the first few uses. Now I've had the Rhino for 7 months and it's holding perfectly. I'm sure I'll have to tighten the screws in a few months, but everything's holding! I've put some photos in the "showcase" sub-section, so you should be able to find them easily.
HBetter to ask @walmis for the current lead times. I have the feeling that the stats stated by the bot are not that relevant anymore. (and of course you can have one much faster as a DIY-kit)
WCurrently approx 90 days
Hthat sounds much better, doesnt it? 
MYeeess haha
V:package: 
RHINO #0811 Has Shipped!
RHINO #0811 Has Shipped!V:package: 
RHINO #0813 Has Shipped!
RHINO #0813 Has Shipped!V:package: RHINO #0814 Has Shipped!
RHINO #0814 Has Shipped!V:package: 
RHINO #0815 Has Shipped!
RHINO #0815 Has Shipped!
PHello, with my order number coming up, I have some questions so I can plan.
I am currently running a 200 mm extension for my VKB MCGU, I like it a lot, so would prob prefer a similar feel.
Does anyone have experience or ideas in terms of extension needed for the Rhino for something similar? I've heard some people say extensions are not required.
I've been looking for an excuse to try the WW F-16EX grip, provided an adapter is used does it work well with the Rhino (e.g., any missing buttons or axis)? Also any thoughts on extensions for the F-16EX grip?
I am currently running a 200 mm extension for my VKB MCGU, I like it a lot, so would prob prefer a similar feel.
Does anyone have experience or ideas in terms of extension needed for the Rhino for something similar? I've heard some people say extensions are not required.
I've been looking for an excuse to try the WW F-16EX grip, provided an adapter is used does it work well with the Rhino (e.g., any missing buttons or axis)? Also any thoughts on extensions for the F-16EX grip?
HThe Rhino has quite a long lever to the connection thread per default. To equalize with your current throw length a 10mm extension will probably be sufficiant. In the knowledge base you find technical drawings were those measures are laid out.
H
PGot it, I found a lot of previous discussion on it too and it seems like a general consensus is no extension or 10 cm
PDo you have any experience with offset (e.g., extension offset to increase distance between base and grip)?
HThat doesn't mean though that 20cm doesn't work. A lot of people (me included) use a 20cm gooseneck extension.
PYeah, fair
HOffset is no problem. There are plenty of options to balance an offset or heavy grip.
TIs there somewhere I could obtain an STL for printing pulley covers?
TThanks! Should help increase the odds of the kid growing up with all his pieces lol
TDo these screw down? Not seeing where it's supposed to attach
RWhen using balance spring are you all balancing in all 4 quadrants or extremes of each axis or just so it stays centered in the middle.
9Hi, I’ve got two questions, does the base work with Tianhang sticks, and what the current wait time?
TThe goal is that with all effects off you can move the stick to any position and it holds there. You can also play with the "static force" setting to achieve the desired effect. I ended up not needing any balance spring, but just a bit of static force. It all depends on your setup.
RDid you make that?
HIn fact, I would start with the static force if any balancing is needed.
My Approach is this. Turn off all effects and center the stick dead on the middle of the grid. If it drops significantly in any direction, apply static force until it doesn't.
Now place the stick to the second to last corner on the grid. First north than south than west than east than nw, ne, sw, se. Etc. The stick should drop in the direction you put it with the same "speed". If not tune the static force accordingly.
If you have difficulties balancing or a very long extension/ heavy grip, you may add some friction before starting the process.
After that you can add some balancing spring.
My Approach is this. Turn off all effects and center the stick dead on the middle of the grid. If it drops significantly in any direction, apply static force until it doesn't.
Now place the stick to the second to last corner on the grid. First north than south than west than east than nw, ne, sw, se. Etc. The stick should drop in the direction you put it with the same "speed". If not tune the static force accordingly.
If you have difficulties balancing or a very long extension/ heavy grip, you may add some friction before starting the process.
After that you can add some balancing spring.
HMy approach is that static force is meant to offset any weight imbalance of the physical stick (e,g. due to a gooseneck extension), and balancing spring is meant to help to keep the stick balanced in any position offset "center" position you put it. E.g. by trimming. I maybe wrong, but that worked pretty well for me.
TYep yep for me and my bro. He’s the one who 3d printed my Rhino on his X1
Works great in games and I really really love not just how it looks but how solid it feels when you’ve pulled it and got it in your hands.
Yes it’s two parts: A handle with a pin and a Base to the chair. Works very similar to how they work in real life
It’s basically just an Arduino box using a “breakaway switch” which is the pull pin part.
Here’s the build thread on Reddit and if you or anyone want a parts list or a breakdown (or more build pics) I’m happy to help out my fellow Rhino drivers.
https://www.reddit.com/r/homecockpits/s/XGdfeoICfQ
Happy Flying and of course Happy Ejecting as well
Works great in games and I really really love not just how it looks but how solid it feels when you’ve pulled it and got it in your hands.
Yes it’s two parts: A handle with a pin and a Base to the chair. Works very similar to how they work in real life
It’s basically just an Arduino box using a “breakaway switch” which is the pull pin part.
Here’s the build thread on Reddit and if you or anyone want a parts list or a breakdown (or more build pics) I’m happy to help out my fellow Rhino drivers.
https://www.reddit.com/r/homecockpits/s/XGdfeoICfQ
Happy Flying and of course Happy Ejecting as well
Reddit
Explore this post and more from the homecockpits community
KThey are attached with double-sided adhesive tape.
V:package: RHINO #0812 Has Shipped!
RHINO #0812 Has Shipped!V:package: 
RHINO #0816 Has Shipped!
RHINO #0816 Has Shipped!V:package: 
RHINO #0819 Has Shipped!
RHINO #0819 Has Shipped!
SI cannot get force trim to work in the Huey. The joystick always falls back to original position when I release it. What's the magic to get it to obey the force trim reset button?
ZIs your trimmer mode set to something other than default in the special settings?
NSetup is pretty simple...(telemffb not required but thats the channel this was posted in) https://discord.com/channels/965234441511383080/1230852705593851964/1304566389519945810
Note that this person's issue turned out to be their USB hub. After connecting the Rhino directly to the PC it started working fine.
Note that this person's issue turned out to be their USB hub. After connecting the Rhino directly to the PC it started working fine.
V:package: RHINO #0820 Has Shipped!
RHINO #0820 Has Shipped!