DevHeads IoT Integration Server•13mo ago

yes and no - its a prototype machine where I need to be able to provide the user with touch screen i

yes and no - its a prototype machine where I need to be able to provide the user with touch screen interface to adjust actuator settings.

matthewflynn_OP•12/2/24, 10:05 AM

so it does need a touch screen interface for interactivity - not necessarily 15" - it was just in the black friday sale lol

Mmatthewflynn_yes and no - its a prototype machine where I need to be able to provide the user...

melta101•12/2/24, 10:05 AM

why not a standard 7 inch screen used normally for rpi

melta101•12/2/24, 10:05 AM

you could use hdmi or mipi CSI is even better for that

matthewflynn_OP•12/2/24, 10:06 AM

the pi is actually mounted underneath the proto unit and I have a 2m cable running to the device.

Mmatthewflynn_the pi is actually mounted underneath the proto unit and I have a 2m cable runni...

melta101•12/2/24, 10:07 AM

I see

melta101•12/2/24, 10:07 AM

but 2M
damn

Mmelta101 why not a standard 7 inch screen used normally for rpi

matthewflynn_OP•12/2/24, 10:07 AM

I suppose I could - also the external monitor had a nice finish to it and could easily be mounted

Mmatthewflynn_the pi is actually mounted underneath the proto unit and I have a 2m cable runni...

segfaultdev.elf•12/2/24, 10:07 AM

it's okay for prototyping but powering a 15 inch monitor won't be much efficient if you think about the facilities it will give

Ssegfaultdev.elf it's okay for prototyping but powering a 15 inch monitor won't be much efficien...

matthewflynn_OP•12/2/24, 10:11 AM

No i agree - I missed that I could power it through the second usb port. I'll give this a go but I have my finger crossed lol.

Mmatthewflynn_No i agree - I missed that I could power it through the second usb port. I'll gi...

segfaultdev.elf•12/2/24, 10:12 AM

okok

matthewflynn_OP•12/2/24, 10:14 AM

but as an overall solution as long as I provide power through the 2nd port - it shouldn't draw from the pi? Do you think I need to rethink this?

Mmatthewflynn_but as an overall solution as long as I provide power through the 2nd port - it ...

segfaultdev.elf•12/2/24, 10:19 AM

I don’t know actually what will happen then but I think it should have internal protection so that both port can be isolated from each other

matthewflynn_OP•12/2/24, 12:40 PM

Thanks for all the help guys - I seem to be getting somewhere now (hopefully). I have a usbc cable on power block into display port 2 (for now I just have the usb connection disconnected for testing). when I plug in the HDMI to the monitor the pisture appears for between 5-10 second and then the signal seems to drop? (it remains powered as it flashed red/green/blue cycles). which if I then unplug and replug the hdmi back in the screen appears again.

Now the monitor is mini HDMI so I currently have it connected through a mini HMDI to full HDMI adapter, then micro HDMI to full HDMI?

https://www.amazon.co.uk/dp/B08Q7QGW52?ref=ppx_yo2ov_dt_b_fed_asin_title

and

https://www.amazon.co.uk/dp/B08RB28YCZ?ref=ppx_yo2ov_dt_b_fed_asin_title

could this be the issue for the signal drop?

Twozoh Mini HDMI to HDMI Adapter, Mini HDMI Male to full HDMI Femal...

Length Specifications Mini HDMI Male to HDMI Female Adapter 8 inch (20cm). High Speed Mini HDMI Adapter Mini HDMI male to HDMI female adapter transfers both high-definition video and digital audio from digital devices to your home theater. High-Resolution Mini HDMI to HDMI Femal 2.0 Adapter cord ...

Twozoh Micro HDMI to HDMI Cable 2M, High Speed HDMI D to HDMI A 2.0...

Item: HDMI A to HDMI D Type cable – Micro HDMI to HDMI Cable. Micro HDMI to HDMI Cable connect your Digital Camcorders, Digital Cameras or Game Consoles to your HDTV/Display, delivers both high-definition video (up to 4K Resolution) and uncompressed multichannel digital audio. High-speed Micro HD...

UUmesh Lokhande Sure, and meanwhile try to read blogs abt those sensors modules and watch YT vid...

az sum misho•12/2/24, 1:46 PM

yeahh thats what i am doing :D those cables are the ones i need, right?

ZacckOsiemo•12/2/24, 1:53 PM

Hey team I am facing an issue, I have a raspberry pi 0 2W and I am trying to interface it with a imx219-160 camera module. However it does not seem my rpi is detecting the camera

 INFO Camera camera_manager.cpp:325 libcamera v0.3.2+99-1230f78d
Preview window unavailable
ERROR: *** no cameras available ***

 INFO Camera camera_manager.cpp:325 libcamera v0.3.2+99-1230f78d
Preview window unavailable
ERROR: *** no cameras available ***

ZacckOsiemo•12/2/24, 1:53 PM

The above is the error I am finding whenever I try and use libcamera, I am trying to update the packages then try again

ZZacckOsiemo Hey team I am facing an issue, I have a raspberry pi 0 2W and I am trying to in...

Renuel Roberts•12/2/24, 1:59 PM

Your Raspberry Pi isn’t detecting the IMX219-160 camera module.
Verify Detection Check with

vcgencmd get_camera

vcgencmd get_camera

. It should show

detected=1

detected=1

ZZacckOsiemo Hey team I am facing an issue, I have a raspberry pi 0 2W and I am trying to in...

Umesh Lokhande•12/2/24, 2:00 PM

Try following steps:
1. Install bullseye os on your raspberry pi
2. After booting raspberry pi enter below commands

sudo raspi-config-> interface-> enable libcamera-> save->reboot

sudo raspi-config-> interface-> enable libcamera-> save->reboot

sudo nano /boot/config.txt

sudo nano /boot/config.txt

(enter this command, scroll down till last [all]) under [all] enter the command "dtoverlay=imx708"
Now, save and reboot raspberry pi
Enter libcamera command-

sudo libcamera -hello t 0

sudo libcamera -hello t 0

And check if the camera is detecting or not

RRenuel Roberts Your Raspberry Pi isn’t detecting the IMX219-160 camera module. Verify Detection...

ZacckOsiemo•12/2/24, 2:00 PM

@Renuel Roberts supported=0 detected=0, libcamera interfaces=0

UUmesh Lokhande Try following steps: 1. Install bullseye os on your raspberry pi 2. After bootin...

ZacckOsiemo•12/2/24, 2:03 PM

I think I am on too new a version to get this option here is my OS version

PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
NAME="Debian GNU/Linux"
VERSION_ID="12"
VERSION="12 (bookworm)"
VERSION_CODENAME=bookworm
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
NAME="Debian GNU/Linux"
VERSION_ID="12"
VERSION="12 (bookworm)"
VERSION_CODENAME=bookworm
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Basically I dont get camera in raspi-config

ZZacckOsiemo @Renuel Roberts supported=0 detected=0, libcamera interfaces=0

Renuel Roberts•12/2/24, 2:03 PM

this results indicate that d rpi doesnt recognise the camera module, check ur configuration

RRenuel Roberts this results indicate that d rpi doesnt recognise the camera module, check ur co...

ZacckOsiemo•12/2/24, 2:04 PM

I'm aware thanks

ZZacckOsiemo I think I am on too new a version to get this option here is my OS version ```...

Umesh Lokhande•12/2/24, 2:04 PM

In new Raspberry Pi OS you may not get camera. As it is enabled by default.

UUmesh Lokhande In new Raspberry Pi OS you may not get camera. As it is enabled by default.

ZacckOsiemo•12/2/24, 2:04 PM

yes that's what the docs say

ZZacckOsiemo I'm aware thanks

Renuel Roberts•12/2/24, 2:05 PM

check ur configurations in this file

sudo nano /boot/config.txt

sudo nano /boot/config.txt

Renuel Roberts•12/2/24, 2:05 PM

if this parts are commented

dtoverlay=imx219
start_x=1
gpu_mem=128

dtoverlay=imx219
start_x=1
gpu_mem=128

RRenuel Roberts check ur configurations in this file `sudo nano /boot/config.txt`

ZacckOsiemo•12/2/24, 2:05 PM

that file moved to /boot/firmware/config.txt/boot/firmware/config.txt and I have checked it

Renuel Roberts•12/2/24, 2:06 PM

then i suggest u update and reboot the system

ZZacckOsiemo yes that's what the docs say

Umesh Lokhande•12/2/24, 2:06 PM

So I suggested to go got Bullseye release of Raspberry Pi OS and then try Camera. last time i tried with new RPi OS , there were lot of issues. This may save your time.

ZacckOsiemo•12/2/24, 2:08 PM

Do these optioons matter if I am on headless rpi?

ZZacckOsiemo Do these optioons matter if I am on headless rpi?

Umesh Lokhande•12/2/24, 2:09 PM

it depends on on which RPi OS you're using Camera with

ZZacckOsiemo Do these optioons matter if I am on headless rpi?

Renuel Roberts•12/2/24, 2:09 PM

re u running the camera over ssh??

UUmesh Lokhande it depends on on which RPi OS you're using Camera with

ZacckOsiemo•12/2/24, 2:14 PM

Bookworm for now

RRenuel Roberts re u running the camera over ssh??

ZacckOsiemo•12/2/24, 2:15 PM

yep

ZZacckOsiemo Bookworm for now

Umesh Lokhande•12/2/24, 2:19 PM

It's been 6+ months for me and not sure if the camera-related issues been fixed in new updates of rpi os but if you find it difficult to resolve then move to A stable legacy version of Raspberry Pi OS Bullseye.

UUmesh Lokhande It's been 6+ months for me and not sure if the camera-related issues been fixed ...

ZacckOsiemo•12/2/24, 2:21 PM

I will consider that shortly

ZZacckOsiemo yep

Renuel Roberts•12/2/24, 2:27 PM

can u verify the camera module is working on its own

RRenuel Roberts can u verify the camera module is working on its own

ZacckOsiemo•12/2/24, 2:38 PM

that would be difficult as I dont have a way to use the cable with another device \

ZacckOsiemo•12/2/24, 2:39 PM

I may consider yocto the other versions of raspian dont work

ZacckOsiemo•12/2/24, 2:53 PM

are all the apt mirrors for the pi slow? does an update take forever for everyonr?

ZZacckOsiemo are all the apt mirrors for the pi slow? does an update take forever for everyon...

Renuel Roberts•12/2/24, 3:16 PM

the mirrior ur using is it closer to ur location

RRenuel Roberts the mirrior ur using is it closer to ur location

ZacckOsiemo•12/2/24, 3:17 PM

yeah I selected local ones but the times are still long

Renuel Roberts•12/2/24, 3:18 PM

try using apt-fast it might speed things up

RRenuel Roberts try using apt-fast it might speed things up

ZacckOsiemo•12/2/24, 3:20 PM

Oh snap, when the current update finishes I will check

ZZacckOsiemo Oh snap, when the current update finishes I will check

segfaultdev.elf•12/2/24, 3:21 PM

what you are cooking man

segfaultdev.elf•12/2/24, 3:21 PM

let me know

Ssegfaultdev.elf let me know

ZacckOsiemo•12/2/24, 3:47 PM

trying to an IMX219 camera to work with a rpi 0 2w, reading the forums I think its a combo of the new OS and the camera not working. Solutions exist for the Bullseye version of the OS but not for the newer ones.

ZacckOsiemo•12/2/24, 3:49 PM

I don't really want to downgrade and reflash but that may be the only option I have at the moment but lets us see after the current update, I don't know why it is loading at 20KB/s

ZacckOsiemo•12/2/24, 3:50 PM

might really be easier to do this on yocto

SageBoy•12/2/24, 4:08 PM

Hi hi... hello

yes and no - its a prototype machine where I need to be able to provide the user with touch screen i

Similar Threads

Similar Threads

Similar Threads