The weight of the Warthog grip isn’t an issue whatsoever though. I use it, and I‘m pretty sure lots

The weight of the Warthog grip isn’t an issue whatsoever though. I use it, and I‘m pretty sure lots of others, too. So if you worried that the weight would be an issue for the Rhino - you don’t need to.

HHiob The weight of the Warthog grip isn’t an issue whatsoever though. I use it, and I...

Alkman•12/7/24, 10:00 AM

It is an issue when you mount it with a long offset extension on a Motion Rig. Lot of work for the Motors, less agility difficult to recenter the stick with Motion active. I didn't now that they stole a source code. Only talking about the Stick, not the Base since I already build 3 Vpforce Bases. My question is, will the Stick that is compatible with a Thrusmaster Base, also work with the Vpforce controller? If it is forbidden to ask about Moza then sorry about that and forget my Question.

AAlkman It is an issue when you mount it with a long offset extension on a Motion Rig. L...

HiobOP•12/7/24, 10:06 AM

I‘m using the Warthog on 20cm gooseneck. (No motion rig though)
I doubt that the motion rig would introduce any issue, but I can’t know of course.

Alkman•12/7/24, 10:11 AM

That's nice for you but I had trouble with 1.2kg mounted on a 10 cm offset extension with 15 cm height. Force Trim was not funny with Motion active.

Alkman•12/7/24, 10:38 AM

@Kite thank's for that Information, I didn't now that. But other question, I see the last Pictures of your v2 throttle mod, how it's going? Are you done with it? Can't wait for that extra leverage

Every day I see the last unmodded thing on my Rig

FFlintlocke Hi guys, quick question: Does anybody use the Rhino with the WinWing F16EX with ...

R7-Cedar•12/7/24, 11:14 AM

If you meant the shaker kit as 'expantion body' for the joystick featured in https://boostedmedia.net/flight/winwing-16ex-metal-joystick-grip-with-shaker-kit-review/
, then it's working fine for me except button 41 and 42. I haven't tried every possible settings/axis though. I use it mostly for DCS. Ka-50 might be one of the module use most out of this expantion.
I agree the naming 'shaker kit' is confusing. I don't care internal vibration motor came with WW joystick niether, while much nicer FFB/telem-effect is going strong.

Boosted MediaTom Ford

WINWING 16EX Metal Joystick Grip (with Shaker Kit) Review

Detailed review of the WINWING 16EX Metal Joystick Grip with shaker kit by Pilot and Flight Sim expert.

Kite•12/7/24, 11:23 AM

It's going well, new prototype next week. @Alkman

AAlkman It is an issue when you mount it with a long offset extension on a Motion Rig. L...

TheAmazinGreat•12/7/24, 11:55 AM

If a stick works on a TM base it will work on the Rhino as generic grip. Read this thread under the functions section and there is some info on trying the moza on other bases. It sort of works but the hats are messed up. https://forum.dcs.world/topic/364801-moza-mh16-review/

TTheAmazinGreat If a stick works on a TM base it will work on the Rhino as generic grip. Read th...

Alkman•12/7/24, 12:33 PM

Thank's for the Link !

RoboGeoff•12/7/24, 3:38 PM

I still prefer a lighter grip, even on the Rhino. I've used both Realsimulator and Tianhang on a 10cm extension and this was the way to go for me

Bob Bushman•12/7/24, 5:59 PM

Think my virpil grips is like 300gr. And i don't mind thst it isnt form factored to something I fly as i have nearly 40 buttons to bind.

spart_sk•12/8/24, 1:05 AM

Hello guys how long is approximately wait for the rhino? I will have budget for it the next year. But I am thinking about joyining the que now, as wait time is in months? Or not...?

Sspart_sk Hello guys how long is approximately wait for the rhino? I will have budget for ...

Zrad•12/8/24, 1:10 AM

📃general

Mike T•12/8/24, 11:15 PM

Does anyone by any chance have a step or obj file for the 57BLF03 motor to use in 3D modelling program for a design I’m working on? Ta

MMike T Does anyone by any chance have a step or obj file for the 57BLF03 motor to use i...

smitty•12/9/24, 12:19 AM

57BLF03.STEP393.65KB

Mike T•12/9/24, 2:14 AM

Thanks

HHiob Click to see attachment

Zrad•12/9/24, 3:59 AM

I use a 20cm gooseneck as my extension too, and started with your setup as a starting template. Do you use the "Low Hydraulic Pressure Effect" in TelemFFB, and if you do, how do you setup the damper/inertia/friction overrides?

ZZrad I use a 20cm gooseneck as my extension too, and started with your setup as a sta...

HiobOP•12/9/24, 8:16 AM

I don’t use neither of those effects, sorry. I set inertia friction and dampening only once per class (fixed wing or helicopter) in dedicated vp config profiles. And I haven’t tried the low hyd press effect yet.

VPforceBot•12/9/24, 1:22 PM

:package:

RHINO #0826 Has Shipped!

VPforceBot•12/9/24, 1:22 PM

:package:

RHINO #0825 Has Shipped!

flasper•12/9/24, 4:51 PM

Do I need to run both TelemFFB and FFB Configurator when playing DCS?

Bob Bushman•12/9/24, 4:57 PM

Not necessarily the configurator but it is where you would change and tune core parts of the stick, don't really see any reason not to

Fflasper Do I need to run both TelemFFB and FFB Configurator when playing DCS?

HiobOP•12/9/24, 6:32 PM

Usually I have VP config running (two instances for pedals and stick) while playing to tweak the profile if necessary.

Bob Bushman•12/9/24, 7:06 PM

Might also be my paranoid behind, but I also like having usbtreeviewer running in admin mode as well.

andyn•12/10/24, 3:01 PM

fedex'd again. "delivery not attempted"

mark turner•12/10/24, 4:14 PM

Where and how is it best to adjust in the software to make the stick a little less responsive as you might do by adding a curve in the DCS axis settings on a normal joystick........?

VPforceBot•12/10/24, 4:45 PM

:package:

RHINO #0828 Has Shipped!

VPforceBot•12/10/24, 4:45 PM

:package:

RHINO #0827 Has Shipped!

ToreDL87•12/10/24, 11:11 PM

I've been having issues with the VKB adapter, I've tried connecting it to the MK1 Blackbox and MK2 Blackbox, and flashed them accordingly, but I can't use the KG12 grip or the TM Warthog grip (w/VKB adapter)

ToreDL87•12/10/24, 11:12 PM

The red "Stick" light on the blackbox keeps flashing.
And obviously I can't ask VKB for help here, the adapter is VPForce after all, so I was just curious what the procedure is here.

ToreDL87•12/10/24, 11:47 PM

This adapter specifically.

ToreDL87•12/10/24, 11:47 PM

The blackbox just keeps blinking red which makes sense because it doesnt have a VKB base connected to it, but even with the KG12 firmware uploaded it wont detect the buttons either.

ToreDL87•12/10/24, 11:48 PM

So how is it envisioned that this VKB adapter is gonna work?

TToreDL87 I've been having issues with the VKB adapter, I've tried connecting it to the MK...

HazardRisk•12/11/24, 7:29 AM

Does it work with original GF base?

HHazardRisk Does it work with original GF base?

ToreDL87•12/11/24, 7:33 AM

Affirmative, and the Thrustmaster Warthog grip with VKB adapter also works on the original GF base.
I just got it working 2AM last night (which is why I was unable to update here, I was dead tired)

ToreDL87•12/11/24, 7:34 AM

Had to choose the right grip in this here window

ToreDL87•12/11/24, 7:34 AM

It had nothing to do with VPForce, it's just fiddly VKB stuff as always

VPforceBot•12/11/24, 2:01 PM

:package:

RHINO #0829 Has Shipped!

TToreDL87 This adapter specifically.

Col. Sanders•12/11/24, 2:52 PM

What rev version is your adapter?

Col. Sanders•12/11/24, 2:54 PM

What game are you playing and the stick shows up in the vkb config app?

CCol. Sanders What rev version is your adapter?

ToreDL87•12/11/24, 3:00 PM

Unsure which rev version, I got the Rhino and adapter in 2023. Here's a screenshot of the BOT message, though it doesn't state which rev version the adapter is either:

CCol. Sanders What rev version is your adapter?

ToreDL87•12/11/24, 3:01 PM

Important to note I did get it working last night

Col. Sanders•12/11/24, 3:04 PM

Ok great, based on timing you should have the rev b. Which is compatible with your black box 2. Hence able to get it to work.

CCol. Sanders Ok great, based on timing you should have the rev b. Which is compatible with yo...

ToreDL87•12/11/24, 3:29 PM

Yeah I thought something was off when the orange box didn't work either, so I delved deeper into the unknowns of VKB software & firmware and was able to get it working.

FFlintlocke Hi guys, quick question: Does anybody use the Rhino with the WinWing F16EX with ...

sith1144•12/11/24, 3:35 PM

I have this exact combo but I havent actually installled the shaker kit lol. I just like that it looks like an F-16 stick so much... one of these days ill probably pop it on. the extra buttons are nice for Il-2

Ssith1144 I have this exact combo but I havent actually installled the shaker kit lol. I j...

ToreDL87•12/11/24, 3:37 PM

Can chime in I've run multiple FFB peripherals at once, Jetseat + Rhino + MSFFB2, and it works, all the device needs is the game to keep sending out the data any given FFB/shaker needs and it should work, doesnt matter how many ffb units are connected

sith1144•12/11/24, 3:38 PM

I dont think the winwing shaker kit has much to do with FFB?

sith1144•12/11/24, 3:39 PM

anyway I found the rumble/shaker stuff on the Rhino itself to be more than sufficient, I see no real need to add a little shaker module to the grip

sith1144•12/11/24, 3:39 PM

just do it for the extra buttons n switches

Ssith1144 just do it for the extra buttons n switches

Flintlocke•12/11/24, 4:47 PM

Cheers, yeah I don't really give a toss about the shaker I just wanted the extra buttons to work.

Flintlocke•12/11/24, 4:48 PM

So close, only about a month to go according to the bot

The weight of the Warthog grip isn’t an issue whatsoever though. I use it, and I‘m pretty sure lots

Similar Threads