If you are planning going to 86 motors you'll need to change the base. It's not that hard.
If you are planning going to 86 motors you'll need to change the base. It's not that hard.
SI am having trouble with the F-18 the stick can not stay in center and now i can not enable autopilot. Any advises here?
SI increased a little the balanced spring
RJust give it a bit deadzone and adjust your static force or balance spring until its centered. Also update to the latest build 1.017b12.
RThats what I use currently. Note I use the sticky option for Spring, so I can override the ingame ffb, which I have switched off.
SThanks mate i will try it
FYour pot1 is at 0.8%. If you have it assigned to spring gain then you have no spring force to center it. You can see if it's assigned to something in the settings tab under Pot#1 function.
FAlso friction is very high. A screenshot of your settings tab would help.
Mwhich part of the VPForce software acts as a throw limiter for the joystick? Is it the "Endstop" secion?
FYes that's the one.
MCan this be set "per aircraft" as well? For example: to bring the A-10 warthog center back.
FYou would have to see if telemffb has that setting in the aircraft's profile.
MOkay. So this is "global" in the VpForce but may be doable in telemffb. I'll dig into this. Thank you.
NThere are no endstop settings in TelemFFB, but you can use the Dynamic Configurator Profile Assignement feature to push a profile when a specific aircraft is loaded.
FMaybe static force is getting in the way. I would disable it and then make sure you calibrate the balance spring well.
Cdoes anyone know why telemffb may not be recognizing or reading inputs from my VKB MCG?
ICan I buy a base for when upgrading the motors? Or I need to make it?
F@SR-FWinger[73]_David offers the base for the 86 motors already pre assembled
H@SR-FWinger[73]_David Get it from him. He makes an awesome base. I physically have one. I just dropped in my 86 motors, did the wiring and done
Ngrip type in configurator must be set for loopback.
loopback app must be running and set to tie your black-box to your Rhino
loopback app must be running and set to tie your black-box to your Rhino
Cwhere is the loopback app located
FIn the Rhino configuration app in the drop down list where to chose the type of grip
Coh ok i thought there was a seperate app you needed
NIt is a separate app, the exe is in the same folder with the configurator exe.
FOh, don't mind me then 
NGoogle Docs
VPforce RHINO FFB User Manual Version 0.81 (WIP) Table of Contents 1. Welcome 1 2. Getting Started 3 2.1. Technical Specifications 4 2.2. Physical Setup 5 2.2.1. The VKB Adapter 6 2.2.2. The WinWing Adapter 6 2.2.3. The RHINO Throw Limiter Adapters 7 2.3. Initial Connection and Updating ...
Cthank you
![[OR] SerGeant](https://cdn.discordapp.com/avatars/290181622832168961/338cff3e564800fa5a1068e9c25e28f5.webp?size=40)
[Hey,
Since the last update of TelemFFB, the VP configurator behaves very strange.
It takes several seconds till I got the device selection window. And then switching between the devices inside the configuration takes also very long. Sometimes they are not initialized correctly in the configurator.
Can anyone else confirm this problem or can someone help?
Since the last update of TelemFFB, the VP configurator behaves very strange.
It takes several seconds till I got the device selection window. And then switching between the devices inside the configuration takes also very long. Sometimes they are not initialized correctly in the configurator.
Can anyone else confirm this problem or can someone help?
![[OR] SerGeant](https://cdn.discordapp.com/avatars/290181622832168961/338cff3e564800fa5a1068e9c25e28f5.webp?size=16)
WSounds like USB driver/hardware related issues - try rebooting
[It’s since several sessions. So many reboots have been inbetween.
Maybe isolating the USBs of the VP force devices leads to a solution.
Maybe isolating the USBs of the VP force devices leads to a solution.
WIs it via USB hub?
[Yes.I have a simpit with 11 USB devices.
But I have not changed a thing. It has been running without issues since I first plugged the rhino in. 2 years ago.
But I have not changed a thing. It has been running without issues since I first plugged the rhino in. 2 years ago.
WIt could be various reasons - for example Windows update updated something
[Found the culprit. An usb cable has been squeezed between two alloy profiles. One wire was cut. So I had the USB error you predicted 
IAre there any 3D print files of the base for larger motors?
HFor the Rhino base. Yeah for sure there is. All the stl etc are on github.
HPost in the DIY section not support
BBefore I attack stuff, is there a guide to switching the din connector 180 degrees as I am running with the emergency stop at the front and already reversed things in the software. just be nice to fit my TM WH stick
FJust remove the two screws and there should be enough slack to pull it out and turn it.
IHey, looking at grabbing the VKB adaptor, what would the wait time for it to be shipped be like?
BPerfect thanks, I was about to do that and thought I would ask JIC 
(@Blackrat just be carful when pulling out the din as the other side is a jst conector so ensure that’s seated securely when putting all back together also ensure you don’t trap and nick a wire
BAlready rotated, but I literally pulled it up just enough to rotate 180 degrees without fouling the seating area so never saw a wire or what was underneath. If I have an issue I will strip it down, but tested with my TM grip and all buttons work.
(
BHelp! Got the Rhino in yesterday and installed in my simpit. I gave MSFS, DCS working properly. Recognize pitch and roll axis.
Got the Rhino in yesterday and installed in my simpit. I gave MSFS, DCS working properly. Recognize pitch and roll axis.BIL2GB on the other hand does not recognize the Rhino axis and I can’t map them in setup.
BSince the other simulators recognize the rhino base it must be Il2 specific. Anyone else here had issues? Solutions?
BIf you cannot see it at all then I think IL2 only sees the first so many controllers plugged in and ignores the rest, maybe you have hit that limit. Its been a few years since I flew it.
NBlackrat is likely on the right track. IL2 only supports 8 devices and will only see the first 8 that it sees. The order it sees them is seemingly random and likely dependant on in what order the devices were connected to windows. Check this thread on how to re-order the devices that IL2 will see. https://forum.il2sturmovik.com/topic/72473-so-you-went-and-bought-too-many-peripherals/
IL-2 Sturmovik Forum
Il-2 supports up to 8 devices. It's possible to exceed that limit, either because you have multiple vjoy devices, have racing gear attached in addition to your flight hardware, or maybe you just went a little wild building your home cockpit. This is a short guide to fixing that problem. If You On...
BOr grab a hub with switches for each device.