The joystick parts I printed myself with a combination of PETG , -CF, and PLA does not cost that muc

The joystick parts I printed myself with a combination of PETG , -CF, and PLA does not cost that much in material. But it took me quite some time to print them one by one and assemble everything.

YYuchenYan The joystick parts I printed myself with a combination of PETG , -CF, and PLA do...

Grasownik•2/5/25, 11:10 PM

Thank you for this very detailed information. I will have to think about it, because if it were all available for purchase in one place and could be shipped abroad, there would be no problem, but since you have to assemble it all and find a 3D printing house with the appropriate material, there are stairs that may be difficult to overcome. If it was possible to apply the VP Force software to the AB9 device I already have, that would be perfect. But unfortunately it probably can't be done.

GGrasownik Thank you for this very detailed information. I will have to think about it, bec...

YuchenYanOP•2/5/25, 11:11 PM

I just DM you

Wwalmis Will push an update tomorrow 🙂

Anthony•2/5/25, 11:28 PM

https://tenor.com/view/my-man-my-man-hd-my-man4k-gif-23532578

Tenor

GGrasownik Thank you for this very detailed information. I will have to think about it, bec...

TheAmazinGreat•2/6/25, 1:36 AM

You can buy already printed kits that come with all the hardware from members in this discord https://discord.com/channels/965234441511383080/1286331895185150096/1286331895185150096

TheAmazinGreat•2/6/25, 1:36 AM

Then you just need to purchase a motor kit from VPF and assemble. I think on these kits they may be sending them mostly pre assembled now.

Old Prospector•2/6/25, 1:57 AM

woohoo. Just need a 5090 now...

GGrasownik Thank you for this very detailed information. I will have to think about it, bec...

Chris•2/6/25, 7:17 AM

I was at some point in the same Boat. Sold my AB9 and used the money to get a RhinoKIT. Because Credit where Credit is due. Without Walmis and the Guys behind TelemFFB, Moza wouldn't have a Business Case. The breaking Point is to get TelemFFB working with the AB9. And i think everyone who is sane would avoid that. Because as soon as you can connect the AB9 to telemFFB i think Moza will stall the development of the MozaCockpit Software. Seeing how they went almost 3 Months silent when they got stepped on thier toes for thier creative way in using Code and not honoring Licences that were and are in place. I would assume they would be rather happy by only supplying the Hardware....... Well now, if they had contributed their changes and interface from the AB9 to their Moza Cockpit (which is essential a beautied up TelemFFB) then maybe someone could have done the implementation and they could be happily printing money by providing decent Hardware at a decent price, without having to worry about a software Package. But they shot themselfes in the foot by not only scavange code they not fully understand, but also translating it to another Language to try to circumvent Licence and now they have to maintain this spaghetti of a code.

VRFGiPJP•2/6/25, 9:16 AM

@Chris "you can connect the AB9 to telemFFB" I can do that?!

Chris•2/6/25, 9:18 AM

Please read the whole Text. But TLDR for you: No you cant. And that will possibly not change in the forseeable future

VRFGiPJP•2/6/25, 9:19 AM

I have read it and if I have misunderstood, apologies

VRFGiPJP•2/6/25, 9:19 AM

I have no problem with that

GGrasownik Thank you for this very detailed information. I will have to think about it, bec...

Fierce_Fire•2/6/25, 9:52 AM

Additionally, you could purchase a complete kit from walmis, lead time is down to ~90 days now

Fierce_Fire•2/6/25, 9:52 AM

Iirc no assembly required. All the red names you see here purchased a full kit, the green ones a diy kit

OldmateHC•2/6/25, 10:04 AM

Got it today just set it up Sooooooo stoked thank you thank you

VPforceBot•2/6/25, 1:33 PM

:package:

RHINO #0891 Has Shipped!

VPforceBot•2/6/25, 1:33 PM

:package:

RHINO #0892 Has Shipped!

VVPforceBot :package: 🇩🇰 **RHINO #0891** Has Shipped!

Kite•2/6/25, 1:40 PM

Skål broder!

KKite Skål broder! 🇩🇰

Eagle1•2/6/25, 2:40 PM

TonyM•2/6/25, 4:29 PM

Rhino #1000 almost done! A milestone!
I suppose that Walmis will then release the long awaited MFG Crosswind FFB update kit

Wyber Boyes•2/6/25, 5:05 PM

Very stupid question but how do you make this go away?

Wyber Boyes•2/6/25, 5:06 PM

I'm clicking on the X but it refuses to leave.

WWyber Boyes I'm clicking on the X but it refuses to leave.

amadeus•2/6/25, 6:10 PM

If you bring up task manager and look for a process called like widgets or something, end task that process. It can get stuck sometimes. Annoyingly it will always come back usually close-able at least.

amadeus•2/6/25, 6:10 PM

I did post a workaround to have it never show, which worked for me, one sec, let me dig up the post

Original message was deleted

amadeus•2/6/25, 6:10 PM

I believe this is a different issue

amadeus•2/6/25, 6:12 PM

📃general

Aamadeus I believe this is a different issue

LeLv30_Superbus•2/6/25, 6:19 PM

My bad, You're absolutely right

amadeus•2/6/25, 6:20 PM

No worries!

Wyber Boyes•2/6/25, 6:43 PM

Many thanks for your help gents. I'm very new to the rhino.

VPS_Choki•2/6/25, 10:58 PM

so with led support for virpil how do i enable the led?

VVPS_Choki so with led support for virpil how do i enable the led?

RUSHER•2/7/25, 5:34 AM

Select color and click "apply settings" (plus "store settings" if you wanna keep it)

VPforceBot•2/7/25, 1:32 PM

:package: RHINO #0894 Has Shipped!

VPforceBot•2/7/25, 1:32 PM

:package:

RHINO #0893 Has Shipped!

Old Prospector•2/7/25, 1:59 PM

I haven't looked at the LED stuff. Is there any way to give Rhino software its normal level of control while letting VPLINK control the LEDs?

OOld Prospector I haven't looked at the LED stuff. Is there any way to give Rhino software its n...

walmis•2/7/25, 2:11 PM

It's not compatible with Virpil stuff, since they have their own protocols for LED control. I'll add API to telemFFB to control LEDs, though.

Old Prospector•2/7/25, 2:12 PM

VPLINK is a funny program, classic virpil

Wwalmis It's not compatible with Virpil stuff, since they have their own protocols for L...

ReapDaddy•2/7/25, 2:59 PM

How do you like the FLNKR so far?

wolfman59#6013•2/7/25, 5:47 PM

hello everyone,
can you confirm to me that there will be no risks, because I am about to connect my rhino VPforce for the first time, with my meanwell 360w 16A only to power my rhino for the moment?
Commentaires

YYuchenYan Click to see attachment

westereq•2/7/25, 6:28 PM

you just made me regret i went with black PETG. Looks great!
do you have more pics by chance?

Spelljammer1•2/7/25, 8:45 PM

I've been out of the loop, has the FLNKR firmware been made yet?

HrEple•2/7/25, 9:00 PM

@Spelljammer1 yes, dropped yesterday and seems to work fine.

HHrEple @Spelljammer1 yes, dropped yesterday and seems to work fine.

Spelljammer1•2/7/25, 11:06 PM

hear hear, works well.

Jehly•2/7/25, 11:24 PM

OK, dumb question - New firmware allows LED on VPC stuff to change. How do we do this..?

Jehly•2/7/25, 11:24 PM

Am I missing the area on VPConf?

Number481•2/7/25, 11:30 PM

New firmware + new configurator. Need both.

Jehly•2/7/25, 11:30 PM

Both done.

Jehly•2/7/25, 11:31 PM

Found it. lol, oops

Jehly•2/8/25, 1:04 AM

I've noticed my base is getting a lot of "interference" it seems. it will randomly throw button presses in and I'm not sure if it's the base/cable or what is going on. pedals arent doing it.

RUSHER•2/8/25, 6:31 AM

Calibrate all the axis of the grip itself and apply/store settings. @Jehly

JJehly I've noticed my base is getting a lot of "interference" it seems. it will rando...

walmis•2/8/25, 6:53 AM

Which grip?

RUSHER•2/8/25, 9:24 AM

I had the problem with the FLANKR Grip. Button presses of the mini stick end positions would randomly be activated. Calibrating the axis of the mini stick solved the problem.

The joystick parts I printed myself with a combination of PETG , -CF, and PLA does not cost that muc

Similar Threads