What do you mean? force trim release is a built in function of the configurator, you just need to en

What do you mean? force trim release is a built in function of the configurator, you just need to enable it and asssign a key. (use loopback for the pedals)

HHiob What do you mean? force trim release is a built in function of the configurator,...

CaptainNel•3/1/25, 2:08 PM

yeah im meaning a way to turn off the force trim system, IE like the dash switch in the huey, i flip that off but I still get DCS' FFB effects, Id like to turn it off for hovering, to save fighting the spring, then turn it back on in stable flight

CaptainNel•3/1/25, 2:09 PM

so my question was is there a way to hotkey presets for spring strength, to turn it to 0% to emulate FT being switched off

LR.Jpatty•3/1/25, 3:05 PM

is this correct we have a 32 physical button limit?

CCaptainNel yeah im meaning a way to turn off the force trim system, IE like the dash switch...

Number481•3/1/25, 3:19 PM

There are no hot keys in either configurator or TelemFFB. But the FT switch in the DCS Huey is modeled by the native implementation. When you turn off the switch, the spring force should stop (check you don't have "sticky" enabled in configurator)

HoopDaBoop•3/1/25, 5:03 PM

HoopDaBoop•3/1/25, 5:05 PM

My 3D printed pulley covers on the Rhino. Also mounted on the QR4Rigs quick release mount so I can easily remove it if needed when racing

LR.Jpatty•3/1/25, 5:23 PM

^fantastic, ya the covers leave a good place for some art

HoopDaBoop•3/1/25, 5:33 PM

Is this still the case? 12+ months wait? I have someone who is interested and was asking me

HHoopDaBoop Is this still the case? 12+ months wait? I have someone who is interested and w...

Piiman•3/1/25, 5:41 PM

It only took about 3 months for mine and 3 days to have it shipped to me in the States. I just got it last Thursday. Just get on the list and forget about it.

HHoopDaBoop Is this still the case? 12+ months wait? I have someone who is interested and w...

Fierce_Fire•3/1/25, 5:41 PM

Closer to 2/3

HoopDaBoop•3/1/25, 5:57 PM

Cool

HoopDaBoop•3/1/25, 5:58 PM

@walmis, you may want to update the FAQ as not to put people off

Obic•3/2/25, 1:37 AM

Mine was 3/4 months
Shipping was fast considering where i live

kbBK•3/2/25, 2:08 AM

Thank you Walmis and "LimitlessVR&Simrigs" for making me aware I absolutely don't need a FFB Stick but can't live without anymore, so pulled the trigger and ordered !

VRFGiPJP•3/2/25, 10:27 AM

Since I am too lazy and/or too stupid to read the manual, may I have a question about axis "curve"? I find that Y-axis pull is too much, i.e. I find I can pull a lot too easily, as I am not supposed to change the saturation curve in-game, which setting in the Configurator should I use? I tried the "Saturation" under Effects tab did nothing regarding it.

HHoopDaBoop Is this still the case? 12+ months wait? I have someone who is interested and w...

VRFGiPJP•3/2/25, 10:28 AM

I ordered in Nov and get it by early Feb. Shipping is tricky though as I am in the UK.

VRFGiPJP•3/2/25, 11:19 AM

Also, anyone using any sort of offset adaptor? I am looking at the one by TM for AVA base, wondering if it works or not

VVRFGiPJP I ordered in Nov and get it by early Feb. Shipping is tricky though as I am in t...

TonyDarkZero•3/2/25, 12:56 PM

Just had a motor kit delivered to the UK, it was an absolute breeze, FedEx took 6 days charged 20% VAT + £12.50 handling fee.

TTonyDarkZero Just had a motor kit delivered to the UK, it was an absolute breeze, FedEx took ...

VRFGiPJP•3/2/25, 1:31 PM

Mine is a full base -- not only the shipping time, but there was custom charge involved...

VVRFGiPJP Mine is a full base -- not only the shipping time, but there was custom charge i...

Blackrat•3/2/25, 1:31 PM

I just had VAT and 12.50 handling for full base plus a motor

VVRFGiPJP I ordered in Nov and get it by early Feb. Shipping is tricky though as I am in t...

HoopDaBoop•3/2/25, 1:48 PM

Thanks. Shipping of mine to the UK was a nightmare. It was done by TNT and 6 months after I got my Rhino they came back asking for the import tax I had already paid.

I had to send them a copy of the invoice they sent me the first time, then a screenshot of my bank statement to prove I paid. WTF... All this would have been on their system anyway

VVRFGiPJP Since I am too lazy and/or too stupid to read the manual, may I have a question ...

Number481•3/2/25, 1:53 PM

Currently, the only way to set up a sort of saturation is to manually edit the calibrated range max and min values in configurator. For example, if your calibrated range is 1275 to 3003, simply subtract/add an equal amount from both ends. 1075 and 3203 as an example. This will cause the full physical deflection of the axis to only amount to a partial excursion in the game , which is exactly what the saturation does for reducing sensitivity.

HHoopDaBoop Thanks. Shipping of mine to the UK was a nightmare. It was done by TNT and 6 m...

Blackrat•3/2/25, 4:12 PM

Shipping is with Fedex now, they sent a text I paid online and after it was delivered I had an invoice stating 0 to pay, it does annoy me we pay £50 shipping and they still want to charge extra for collecting VAT

A few years ago I bought a FFB wheel from the US £3000, it was defective so I returned it for repair, they made a mistake and sent me another returned one, I returned it and they sent me a new one. I had to pay 20% VAT on each wheel and then claim back from the inland revenue the two which were returned.

Bloody nightmare.

HoopDaBoop•3/2/25, 5:12 PM

Sadly TNT is part of FedEx. Their incompetence is shared.

FedEx lost one half of my shipment from DOF Reality for 2 weeks in a customs loop that took so many calls to resolve.

They also lost my Varjo Aero for a week. They haven't done much to earn my trust

HHoopDaBoop Sadly TNT is part of FedEx. Their incompetence is shared. FedEx lost one half o...

Blackrat•3/2/25, 5:13 PM

I know, that other incident was fedex too, incompetence all round sadly.

Blackrat•3/2/25, 5:17 PM

I keep all paperwork now

HoopDaBoop•3/2/25, 5:33 PM

Very wise.

Bob Bushman•3/2/25, 5:46 PM

Think it was fedex that delivered my especially tagged "signature required" shipment from virpil to my neighbours bushes.

VRFGiPJP•3/2/25, 6:33 PM

I had a very upsetting experience with FedEx on a return item. The CS was both lying and incompetent. This time, the “planned” delivery was a Tue but as I see the base was in my area on Sat, I called FedEx and asked them to deliver on Mon and it worked.

NNumber481 Currently, the only way to set up a sort of saturation is to manually edit the c...

VRFGiPJP•3/2/25, 6:34 PM

Not exactly what it is but i am having a look first. Thanks

Bob Bushman•3/2/25, 7:15 PM

The rest is also in mostly competition on how bad they can be as well.

I've had several occasions where I've literally been standing in the street, watched the dhl truck stop at the bottom of my street, wait a minute, pull a u turn and a few seconds the app pings "delivery attempted".

Ups, with my rhino as a matter of fact didn't even make to the bottom of my street, but got scared the hill before that, so I had to meet him half a mile down the road.
At least he called me.

ReapDaddy•3/2/25, 9:33 PM

Dang, where do you live? Elm Street? hehe.

ReapDaddy•3/2/25, 9:40 PM

VPforceBot•3/3/25, 10:14 AM

:package:

RHINO #0931 Has Shipped!

VPforceBot•3/3/25, 10:14 AM

:package:

RHINO #0930 Has Shipped!

HHoopDaBoop Click to see attachment

FlatSpin•3/3/25, 11:39 PM

Is the QR just bolted directly to 4040 extrusion?

HoopDaBoop•3/4/25, 1:14 AM

Yes

m2times_•3/4/25, 9:25 AM

cmon virpil send me my stuuuuffffffff

VPforceBot•3/4/25, 11:01 AM

:package:

RHINO #0932 Has Shipped!

VPforceBot•3/4/25, 11:01 AM

:package:

RHINO #0933 Has Shipped!

Dentedend10•3/4/25, 3:10 PM

Hi, is the RhinoLoopback app necessary with VKB grips? I wonder cuz when I use it, I still assign buttons in games to the VKB grips, and only assign axis to the Rhino

Vakarian•3/4/25, 3:14 PM

Not necessary

Draken35•3/4/25, 10:46 PM

I have 2 DCS modules profiles set to Hardware Trim . I jump into one of them , fly around and modify the trim , then I choose a slot for the other module and the initial position of the stick(physical) in the second module is the same as the ending position of the first one... Is there a way to reset the stick to center on profile load? Trim reset on the second plane doesn't seem to work in this case (not yet 100% sure on this).

ruda_malpa•3/5/25, 1:18 AM

Hi. I have a question for FLNKR grip owners. I just received my grip, and after calibration, I noticed that the analog stick’s X-axis is not centering correctly (it reads 117 instead of 127). To make it usable, I had to update the center position in the Rhino configurator. Worse still, the center position drifts slightly, making it impossible to use without setting dead zones. I've never had similar issues with VKB grips. Is this typical for other FLNKR grips, or did I receive a faulty unit?

hariskut•3/5/25, 7:21 AM

I’ve been playing IL-2 BOS recently, and the Rhino base is recognized. However, I don’t seem to feel the changes in stick force that correspond to speed. I clearly remember experiencing this effect many years ago when I used the FFB to play earlier versions of IL-2. Do I need to adjust the parameters myself to achieve this?

Rruda_malpa Hi. I have a question for FLNKR grip owners. I just received my grip, and after ...

walmis•3/5/25, 8:26 AM

You can recenter the axis, hit the little "C" button and will change the values so the center is at 127. With some software trickery this area can be improved somewhat in the future.

VPforceBot•3/5/25, 11:21 AM

:package:

RHINO #0936 Has Shipped!

VPforceBot•3/5/25, 11:21 AM

:package:

RHINO #0938 Has Shipped!

VPforceBot•3/5/25, 11:22 AM

:package:

RHINO #0937 Has Shipped!

Youtch•3/5/25, 4:46 PM

I am trying to configure Spring Dynamic for Il2, but cannot find much information on the manual. How the values from 0 to 1 are linked to the actual speed exactly. What is 1? Is it the maximum speed of the aircraft or some type of absolute speed for all aircrafts? How does it change from one aircraft to another? Let say for instance that for Bf109-E7 stick becomes very stiff over 500 km/h while on a Bf109-K4 it becomes stiff at 700km/h. If I want to trigger a 2x coefficient to reflect that the elevators are becoming very stiff, how do I know at which point of the horizontal axis I need to put coefficient x2? Many thanks in advance for clarifying this.

What do you mean? force trim release is a built in function of the configurator, you just need to en

Similar Threads

Similar Threads

Similar Threads