Sadly TNT is part of FedEx. Their incompetence is shared. FedEx lost one half of my shipment from D

Sadly TNT is part of FedEx. Their incompetence is shared.

FedEx lost one half of my shipment from DOF Reality for 2 weeks in a customs loop that took so many calls to resolve.

They also lost my Varjo Aero for a week. They haven't done much to earn my trust

HHoopDaBoop Sadly TNT is part of FedEx. Their incompetence is shared. FedEx lost one half o...

Blackrat•3/2/25, 5:13 PM

I know, that other incident was fedex too, incompetence all round sadly.

Blackrat•3/2/25, 5:17 PM

I keep all paperwork now

HoopDaBoopOP•3/2/25, 5:33 PM

Very wise.

Bob Bushman•3/2/25, 5:46 PM

Think it was fedex that delivered my especially tagged "signature required" shipment from virpil to my neighbours bushes.

VRFGiPJP•3/2/25, 6:33 PM

I had a very upsetting experience with FedEx on a return item. The CS was both lying and incompetent. This time, the “planned” delivery was a Tue but as I see the base was in my area on Sat, I called FedEx and asked them to deliver on Mon and it worked.

NNumber481 Currently, the only way to set up a sort of saturation is to manually edit the c...

VRFGiPJP•3/2/25, 6:34 PM

Not exactly what it is but i am having a look first. Thanks

Bob Bushman•3/2/25, 7:15 PM

The rest is also in mostly competition on how bad they can be as well.

I've had several occasions where I've literally been standing in the street, watched the dhl truck stop at the bottom of my street, wait a minute, pull a u turn and a few seconds the app pings "delivery attempted".

Ups, with my rhino as a matter of fact didn't even make to the bottom of my street, but got scared the hill before that, so I had to meet him half a mile down the road.
At least he called me.

ReapDaddy•3/2/25, 9:33 PM

Dang, where do you live? Elm Street? hehe.

ReapDaddy•3/2/25, 9:40 PM

VPforceBot•3/3/25, 10:14 AM

:package:

RHINO #0931 Has Shipped!

VPforceBot•3/3/25, 10:14 AM

:package:

RHINO #0930 Has Shipped!

HHoopDaBoop Click to see attachment

FlatSpin•3/3/25, 11:39 PM

Is the QR just bolted directly to 4040 extrusion?

HoopDaBoopOP•3/4/25, 1:14 AM

Yes

m2times_•3/4/25, 9:25 AM

cmon virpil send me my stuuuuffffffff

VPforceBot•3/4/25, 11:01 AM

:package:

RHINO #0932 Has Shipped!

VPforceBot•3/4/25, 11:01 AM

:package:

RHINO #0933 Has Shipped!

Dentedend10•3/4/25, 3:10 PM

Hi, is the RhinoLoopback app necessary with VKB grips? I wonder cuz when I use it, I still assign buttons in games to the VKB grips, and only assign axis to the Rhino

Vakarian•3/4/25, 3:14 PM

Not necessary

Draken35•3/4/25, 10:46 PM

I have 2 DCS modules profiles set to Hardware Trim . I jump into one of them , fly around and modify the trim , then I choose a slot for the other module and the initial position of the stick(physical) in the second module is the same as the ending position of the first one... Is there a way to reset the stick to center on profile load? Trim reset on the second plane doesn't seem to work in this case (not yet 100% sure on this).

ruda_malpa•3/5/25, 1:18 AM

Hi. I have a question for FLNKR grip owners. I just received my grip, and after calibration, I noticed that the analog stick’s X-axis is not centering correctly (it reads 117 instead of 127). To make it usable, I had to update the center position in the Rhino configurator. Worse still, the center position drifts slightly, making it impossible to use without setting dead zones. I've never had similar issues with VKB grips. Is this typical for other FLNKR grips, or did I receive a faulty unit?

hariskut•3/5/25, 7:21 AM

I’ve been playing IL-2 BOS recently, and the Rhino base is recognized. However, I don’t seem to feel the changes in stick force that correspond to speed. I clearly remember experiencing this effect many years ago when I used the FFB to play earlier versions of IL-2. Do I need to adjust the parameters myself to achieve this?

Rruda_malpa Hi. I have a question for FLNKR grip owners. I just received my grip, and after ...

walmis•3/5/25, 8:26 AM

You can recenter the axis, hit the little "C" button and will change the values so the center is at 127. With some software trickery this area can be improved somewhat in the future.

VPforceBot•3/5/25, 11:21 AM

:package:

RHINO #0936 Has Shipped!

VPforceBot•3/5/25, 11:21 AM

:package:

RHINO #0938 Has Shipped!

VPforceBot•3/5/25, 11:22 AM

:package:

RHINO #0937 Has Shipped!

Youtch•3/5/25, 4:46 PM

I am trying to configure Spring Dynamic for Il2, but cannot find much information on the manual. How the values from 0 to 1 are linked to the actual speed exactly. What is 1? Is it the maximum speed of the aircraft or some type of absolute speed for all aircrafts? How does it change from one aircraft to another? Let say for instance that for Bf109-E7 stick becomes very stiff over 500 km/h while on a Bf109-K4 it becomes stiff at 700km/h. If I want to trigger a 2x coefficient to reflect that the elevators are becoming very stiff, how do I know at which point of the horizontal axis I need to put coefficient x2? Many thanks in advance for clarifying this.

Youtch•3/5/25, 5:05 PM

My second question is related to helicopter. Helicopter cyclic like the one of the UH-H1 are not self-centering with a spring effect, but the force to apply change depending on the amount of deflection, how can this be captured in VPForce? Many thanks again

YYoutch My second question is related to helicopter. Helicopter cyclic like the one of t...

CaptainNel•3/5/25, 5:08 PM

They’re not entirely unsprung, they use force trim, magnetic brakes that do provide some return to trim, it’s just that trim is moveable. Your best bet would be to enable force trim in telemffb, and set a very low spring force and play with the dampers

CaptainNel•3/5/25, 5:09 PM

And the appropriate force trim interrupt buttons etc

CCaptainNel They’re not entirely unsprung, they use force trim, magnetic brakes that do prov...

Youtch•3/5/25, 5:32 PM

Thanks for your answer. What I meant is that the cyclic does not self-center as for fixed wing aircrafts where the stick is "spring loaded" as for instance in F14 or F4 or ww2 propeller planes, the cyclic moves freely and does not return to the center. But this does NOT imply that there is no changes of force along the travel range of the cyclic. In UH-H1 apparently the force required to make any input changes depends on the amount of deflection, the more deflection the more force required in the input. I wish I would be able to capture this behavior, but I have no clue how to create a gain curve in VPForce_Configurator to link more deflection with more force without using spring. I also recently found out that for UH-H1 pilots are able to feel where is the neutral position of the stick because there is a steeper gradient of force just around the neutral position, this is basically how they manage to know where the center is, even when the aircraft is not yet forced trim before take-off. Also I was told that UH-H1 pilots did not need to use force trim in flight and were very rarely using it.

CaptainNel•3/5/25, 6:13 PM

To my mind you’re explaining the feeling of force trim, but I’m very likely wrong on that. Without force trim active the hydraulics would provide a relatively stable force throughout the movement of the stick, I can only imagine you’d have to play around with damper settings or using a ramping spring curve to replicate what you’re explaining. There are gain curves in the advanced tabs on VPConfig, and telemffb gives you more options as well

CCaptainNel To my mind you’re explaining the feeling of force trim, but I’m very likely wron...

Youtch•3/5/25, 7:52 PM

Which Trimmer set-up you are using in DCS for the Huey, the default one as per the Rhino manual or the one for FFB stick?

CaptainNel•3/5/25, 7:54 PM

All of my trims are in telemffb I don’t use the native ffb

CCaptainNel All of my trims are in telemffb I don’t use the native ffb

Youtch•3/5/25, 8:44 PM

There is no Trim in TelemFFB, do you refer to the hardware force Trim in VPForce_Configurator in conjunction with RhinoLoop?

YYoutch There is no Trim in TelemFFB, do you refer to the hardware force Trim in VPForce...

CaptainNel•3/5/25, 8:46 PM

Theres heli specific force trims on telemffb

CaptainNel•3/5/25, 8:46 PM

That’s all the force trim I use

CaptainNel•3/5/25, 8:47 PM

Granted I exclusively fly helicopters in sims I don’t own a plane module

CaptainNel•3/5/25, 8:47 PM

I have the built in FFB turned off

CCaptainNel I have the built in FFB turned off

Youtch•3/5/25, 8:48 PM

You mean the Trim Release Damper? I am assuming that we are both talking about DCS. Thanks again for your patience with me.

CaptainNel•3/5/25, 8:49 PM

Yeah DCS, trim release damper overrides the DCS native FFB, telemffb has an option for override DCS Spring

CaptainNel•3/5/25, 8:52 PM

CaptainNel•3/5/25, 8:52 PM

I’ve had to use Remote Desktop so it looks odd

CaptainNel•3/5/25, 8:53 PM

But the override dcs spring option lets you let a custom spring curve and strength, a force trim release and a FT re-centre bind etc

CaptainNel•3/5/25, 8:53 PM

Trim release damper etc is all in there too

unstopy•3/5/25, 11:16 PM

Recently got an email telling me my preorder was almost ready, wasn’t expecting it nearly this early so I wanted to ask do you need to fully pay within 10 days or just confirm the order via the link?

unstopy•3/5/25, 11:16 PM

Didn’t see anything on the FAQ about it

Uunstopy Recently got an email telling me my preorder was almost ready, wasn’t expecting ...

Flo-Soft•3/6/25, 12:07 AM

For the first email with the link to the order form you just have to fill out the order form and add any additional parts you want to order (adapter...). That's the actual placing of your final order. When all parts are available you will get another email (New invoice...) containing the invoice of your ordered parts and the clear instructions how to pay.

unstopy•3/6/25, 12:07 AM

Ok I appreciate the help, thank you

Uunstopy Ok I appreciate the help, thank you

Piiman•3/6/25, 1:59 AM

Be aware the invoice will come soon after you place that order. For me it was, I got mail on Wednesday, and placed the order on Fri and on Monday I had the invoice with a few days to pay, which I paid, and 2.5 days later it was in my hands in Florida USA. But as you noted their list seems to be moving much faster, My order only took about 3 mos total so if you can't do it now get back on the list.

CCaptainNel Click to see attachment

Youtch•3/6/25, 11:14 AM

Thanks for sharing your settings, much appreaciated. In the VPForce manual, there is nothing explaining the Trim Release Damper, and all the mentions to Trim Release seemed to be related to MSFS, so I had just totally skipped this one. I will need to read more about it, to understand what is supposed to do, and see how to configure it. I went to the release note and found this: - Helicopter Trim Release Damper
- This is not a replacement of the in-game trim release functionality. It is a simple spring based dampening effect, identical to the one for MSFS.
- To configure, simply enable the effect and bind the same button that you have configured for TR in the sim. While the button is depressed, TelemFFB will add the dampening effect and will remove it when the button is released. The actual trimming and centering offset is still completely handled by DCS. Thanks again

Sadly TNT is part of FedEx. Their incompetence is shared. FedEx lost one half of my shipment from D

Similar Threads

Similar Threads

Similar Threads