Put more services on the one container?

T

terrxo•7/4/25, 11:03 AM

Are there any examples of containers in a monorepo? Does it even work as of now?

3

3m0•7/4/25, 11:48 AM

anyone having trouble running the containers only in production? For some reason, when I run my container locally in dev mode, everything works fine, but when the container is deployed, it just doesn't run, and no error logs are generated

11984 Ford Laser Put more services on the one container?

J

jaden•7/4/25, 12:25 PM

Put more services(container) on the one worker . just this

J

jaden•7/4/25, 12:45 PM

The code for the worker is together with the code for the container, so I understand that does one worker need to correspond to one container?

J

jaden•7/4/25, 12:45 PM

@1984 Ford Laser

Jjaden The code for the worker is together with the code for the container, so I unders...

I

Isaac McFadyen•7/4/25, 1:13 PM

No, if you use one Worker and then add multiple

containers

containers

containers

containers (in your wrangler.jsonc right there) that should work.

I

Isaac McFadyen•7/4/25, 1:13 PM

The only reason theres 1:1 in the examples is for simplicity/to avoid overwhelming new users.

Jjaden The code for the worker is together with the code for the container, so I unders...

T

terrxo•7/4/25, 3:03 PM

Did you get it working?

G

Gabriel Francisco•7/4/25, 4:47 PM

My container is being killed randomly... @Mike Nomitch how can I see the reason?

R

rufi•7/5/25, 1:05 AM

I can deploy my containers and it works remotely, but I cannot run them locally in dev mode, I get: "A call to blockConcurrencyWhile() in a Durable Object waited for too long. The call was canceled and the Durable Object was reset." (...) "container error: Failed to verify port 8000 is available after 27 attempts, last error: internal error; reference = vs98k.."

Rrufi I can deploy my containers and it works remotely, but I cannot run them locally ...

L

lupin•7/5/25, 12:46 PM

Same here :NotLikeThis:

R

Radu•7/5/25, 6:06 PM

  const response = await container.containerFetch("http://container/to-markdown", {
    method: "POST",
    headers: {
      "Content-Type": "multipart/form-data",
      "Content-Disposition": `form-data; name="file"; filename="${file.name}"`,
    },
    body: formData,
  });

  const response = await container.containerFetch("http://container/to-markdown", {
    method: "POST",
    headers: {
      "Content-Type": "multipart/form-data",
      "Content-Disposition": `form-data; name="file"; filename="${file.name}"`,
    },
    body: formData,
  });

  const response = await container.containerFetch("http://container/to-markdown", {
    method: "POST",
    headers: {
      "Content-Type": "multipart/form-data",
      "Content-Disposition": `form-data; name="file"; filename="${file.name}"`,
    },
    body: formData,
  });

  const response = await container.containerFetch("http://container/to-markdown", {
    method: "POST",
    headers: {
      "Content-Type": "multipart/form-data",
      "Content-Disposition": `form-data; name="file"; filename="${file.name}"`,
    },
    body: formData,
  });

✘ [ERROR] DOMException {

code: 25,
name: 'DataCloneError',
message: 'Could not serialize object of type "FormData". This type does not support
serialization.',
stack: 'DataCloneError: Could not serialize object of type "FormData". This type does not
support serialization.\n' +

is this not implemented?

M

Mr. Technician•7/5/25, 6:13 PM

12:55:42.975    #4 ERROR: failed to register layer: write /usr/src/app/node_modules/playwright-1.51/lib/vite/recorder/assets/codeMirrorModule-B9YMkrwa.js: no space left on device
12:55:53.846    ------
12:55:53.851     > [1/1] FROM ghcr.io/browserless/chromium:latest@sha256:ca1cb28a74a7658175057711ca2b2f68b4eb72a2897b2515d2dac124a4a5d70b:
12:55:53.852    ------
12:55:53.853    Dockerfile:1
12:55:53.853    --------------------
12:55:53.853       1 | >>> FROM ghcr.io/browserless/chromium:latest
12:55:53.853       2 |     
12:55:53.853       3 |     ENV \
12:55:53.853    --------------------
12:55:53.853    ERROR: failed to build: failed to solve: failed to register layer: write /usr/src/app/node_modules/playwright-1.51/lib/vite/recorder/assets/codeMirrorModule-B9YMkrwa.js: no space left on device
12:55:53.869    
12:55:53.983    ✘ [ERROR] Build exited with code: 1

12:55:42.975    #4 ERROR: failed to register layer: write /usr/src/app/node_modules/playwright-1.51/lib/vite/recorder/assets/codeMirrorModule-B9YMkrwa.js: no space left on device
12:55:53.846    ------
12:55:53.851     > [1/1] FROM ghcr.io/browserless/chromium:latest@sha256:ca1cb28a74a7658175057711ca2b2f68b4eb72a2897b2515d2dac124a4a5d70b:
12:55:53.852    ------
12:55:53.853    Dockerfile:1
12:55:53.853    --------------------
12:55:53.853       1 | >>> FROM ghcr.io/browserless/chromium:latest
12:55:53.853       2 |     
12:55:53.853       3 |     ENV \
12:55:53.853    --------------------
12:55:53.853    ERROR: failed to build: failed to solve: failed to register layer: write /usr/src/app/node_modules/playwright-1.51/lib/vite/recorder/assets/codeMirrorModule-B9YMkrwa.js: no space left on device
12:55:53.869    
12:55:53.983    ✘ [ERROR] Build exited with code: 1

12:55:42.975    #4 ERROR: failed to register layer: write /usr/src/app/node_modules/playwright-1.51/lib/vite/recorder/assets/codeMirrorModule-B9YMkrwa.js: no space left on device
12:55:53.846    ------
12:55:53.851     > [1/1] FROM ghcr.io/browserless/chromium:latest@sha256:ca1cb28a74a7658175057711ca2b2f68b4eb72a2897b2515d2dac124a4a5d70b:
12:55:53.852    ------
12:55:53.853    Dockerfile:1
12:55:53.853    --------------------
12:55:53.853       1 | >>> FROM ghcr.io/browserless/chromium:latest
12:55:53.853       2 |     
12:55:53.853       3 |     ENV \
12:55:53.853    --------------------
12:55:53.853    ERROR: failed to build: failed to solve: failed to register layer: write /usr/src/app/node_modules/playwright-1.51/lib/vite/recorder/assets/codeMirrorModule-B9YMkrwa.js: no space left on device
12:55:53.869    
12:55:53.983    ✘ [ERROR] Build exited with code: 1

12:55:42.975    #4 ERROR: failed to register layer: write /usr/src/app/node_modules/playwright-1.51/lib/vite/recorder/assets/codeMirrorModule-B9YMkrwa.js: no space left on device
12:55:53.846    ------
12:55:53.851     > [1/1] FROM ghcr.io/browserless/chromium:latest@sha256:ca1cb28a74a7658175057711ca2b2f68b4eb72a2897b2515d2dac124a4a5d70b:
12:55:53.852    ------
12:55:53.853    Dockerfile:1
12:55:53.853    --------------------
12:55:53.853       1 | >>> FROM ghcr.io/browserless/chromium:latest
12:55:53.853       2 |     
12:55:53.853       3 |     ENV \
12:55:53.853    --------------------
12:55:53.853    ERROR: failed to build: failed to solve: failed to register layer: write /usr/src/app/node_modules/playwright-1.51/lib/vite/recorder/assets/codeMirrorModule-B9YMkrwa.js: no space left on device
12:55:53.869    
12:55:53.983    ✘ [ERROR] Build exited with code: 1

M

Mr. Technician•7/5/25, 6:13 PM

can I get a file space increase pretty please?

M

Mr. Technician•7/5/25, 7:35 PM

    ✘ [ERROR] Image too large: needs 2467 MB, but your app is limited to images with size 2000 MB. Your account needs more disk size per instance to run this container. The default disk size is 2GB.

    ✘ [ERROR] Image too large: needs 2467 MB, but your app is limited to images with size 2000 MB. Your account needs more disk size per instance to run this container. The default disk size is 2GB.

    ✘ [ERROR] Image too large: needs 2467 MB, but your app is limited to images with size 2000 MB. Your account needs more disk size per instance to run this container. The default disk size is 2GB.

    ✘ [ERROR] Image too large: needs 2467 MB, but your app is limited to images with size 2000 MB. Your account needs more disk size per instance to run this container. The default disk size is 2GB.

M

Mr. Technician•7/5/25, 7:35 PM

MMr. Technician ``` ✘ [ERROR] Image too large: needs 2467 MB, but your app is limited to imag...

A

Alex•7/5/25, 8:23 PM

Update ur docker ignore file. 2GB mostly enough even for a large projects.

AAlex Update ur docker ignore file. 2GB mostly enough even for a large projects.

M

Mr. Technician•7/5/25, 8:24 PM

can i do this when all im doing is pulling an existing image?

M

Mr. Technician•7/5/25, 8:24 PM

i’m not surprised it’s big since both images i tested include Chromium

A

Alex•7/5/25, 8:26 PM

You can get original dockerfile and drop the stuff you don't need. I would start from that point

AAlex You can get original dockerfile and drop the stuff you don't need. I would start...

M

Mr. Technician•7/5/25, 10:39 PM

ah ok, i doubt there much i can drop unfortunately

6

619napster•7/5/25, 11:10 PM

The code below was working fine a day ago
but now I am getting this error
anything I have missed ?
I was not calling start before as well

6

619napster•7/5/25, 11:59 PM

Never mind i just missed a pacakge in requirements.txt

M

Muhammad•7/6/25, 6:37 AM

I'm getting: Container suddenly disconnected, try again

it's working perfectly on localhost but once I deploy I get the error

IIsaac McFadyen No, if you use one Worker and then add multiple `containers` (in your wrangler.j...

J

jaden•7/7/25, 2:06 AM

In our current architecture, I want it to be similar to "worker for platform." A worker can mount multiple containers (services) and use subdomains to distribute traffic to different containers. Currently, when I look at the deployment process, containers are represented as an array. In this case, it seems that deploying multiple containers simultaneously is not feasible, as this is a distributed scenario where several deployments may occur at the same time. How can this be handled?

Tterrxo Did you get it working?

J

jaden•7/7/25, 2:08 AM

yes.

J

jaden•7/7/25, 2:23 AM

The wrangler tail prints the logs of the current worker. Is there any way to query the real-time logs of the container through a command? This is because the stack output of the container is also of concern.

RRadu ``` const response = await container.containerFetch("http://container/to-markd...

D

daycompacted•7/7/25, 3:27 AM

Hey, were you able to solve this, I'm having the same issue for multi part form

A

Alexander•7/7/25, 7:47 PM

Hey

Thanks for the awesome work with Containers - I'm having so much plans for these. Building some really cool stuff and I want to understand if there is a limit & a way to increase

max_instances

max_instances

max_instances

max_instances for an account?

E

Elliot Hesp•7/8/25, 8:39 AM

Is it possible to access the underlying

storage

storage

storage

storage when extending the container?

T

TobiLG•7/8/25, 9:04 AM

If you've built OSS projects on Containers, or wrote a blog post about it, feel free to add them via opening a PR to https://github.com/tobilg/awesome-cloudflare-containers

GitHub

GitHub - tobilg/awesome-cloudflare-containers

Contribute to tobilg/awesome-cloudflare-containers development by creating an account on GitHub.

L

ldl•7/8/25, 11:05 AM

What does it mean when the State is Degraded, and how should I resolve it?

S

spike•7/8/25, 5:09 PM

can you not pass envVars with startAndWaitForPorts?

Sspike can you not pass envVars with startAndWaitForPorts?

J

John Spurlock•7/8/25, 5:23 PM

not at the call-level like

start

start

start

start, but looks like it will default to the container-level

envVars

envVars

envVars

envVars so you could set them there

S

spike•7/8/25, 5:28 PM

yea just saw the pr to add startoptions

F

Frederic Houle•7/8/25, 9:21 PM

I'm not able to make my container work properly once deployed, I Keep getting "Container suddenly disconnected, try again"

F

Frederic Houle•7/8/25, 9:21 PM

while in local, everything runs smooth

T

toshu•7/9/25, 12:04 AM

Hello! Are there any examples of github actions for containers deployment? My action works intermittently, fails often with auth permission:
[ERROR] A request to the Cloudflare API (/zones/.../workers/routes) failed.

Authentication error [code: 10000]

It looks like you are authenticating Wrangler via a custom API token set in an environment variable.
Please ensure it has the correct permissions for this operation.

Ttoshu Hello! Are there any examples of github actions for containers deployment? My ac...

D

downeydabber•7/9/25, 1:50 AM

Are you providing it an API token? Shot in the dark, but if you are using the default "edit cloudflare workers" template, it doesn't seem to include containers permissions by default, might be worth trying to add that permission and see if it helps

D

downeydabber•7/9/25, 1:56 AM

Has anyone had success with containers on ARM based macs? getting container errors on both base OS and in a devcontainer on mac. Everything seems to be configured correctly but can't get it to fetch properly. Even the cloudflare examples don't seem to be working. Haven't tested on an x86 machine yet

I

Idyll•7/9/25, 3:46 AM

So... I've managed to get some interesting proof-of-concept stuff going with containers. But to make them really useful I need to talk to data somewhere...

can I bind D1 somehow? do I need to talk back to the worker for D1? is the standard approach for this a websocket?
- what are the plans for mounting R2 like was discussed on the video?
- what about hyperdrive?
- I have some workloads where even with hyperdrive I can't imagine wanting to be out of the same region as my DB. and right now my containers end up on another continent.

R

ralphjsmit•7/9/25, 8:37 AM

Can we use the Containers beta to run the Browser Rendering feature at a higher memory?
Or is the dockerfile a must and must I try to run e.g. Chromium via Docker?

S

sampotter•7/9/25, 10:10 AM

Anybody elses containers being consistently being evicted after approx 2 minutes? I'm starting up a container manually using the

start

start

start

start method so that I can provide a

JOB_ID

JOB_ID

JOB_ID

JOB_ID environment variable to the container. The job starts up and begins processing for roughly 2 minutes before dying? Is this normal? Btw I'm setting the

sleepAfter

sleepAfter

sleepAfter

sleepAfter option to

24h

24h

24h

24h

R

ralphjsmit•7/9/25, 10:30 AM

Hello, does anybody see why I'm getting the following 404?

 => => naming to registry.cloudflare.com/b6e9a2ec6a599a3fec8a63f9fc29c03d/browsershot-containers:22743b05                                                            0.0s
Login Succeeded
Image does not exist remotely, pushing: registry.cloudflare.com/b6e9a2ec6a599a3fec8a63f9fc29c03d/browsershot-containers:22743b05
The push refers to repository [registry.cloudflare.com/b6e9a2ec6a599a3fec8a63f9fc29c03d/browsershot-containers]

 => => naming to registry.cloudflare.com/b6e9a2ec6a599a3fec8a63f9fc29c03d/browsershot-containers:22743b05                                                            0.0s
Login Succeeded
Image does not exist remotely, pushing: registry.cloudflare.com/b6e9a2ec6a599a3fec8a63f9fc29c03d/browsershot-containers:22743b05
The push refers to repository [registry.cloudflare.com/b6e9a2ec6a599a3fec8a63f9fc29c03d/browsershot-containers]

 => => naming to registry.cloudflare.com/b6e9a2ec6a599a3fec8a63f9fc29c03d/browsershot-containers:22743b05                                                            0.0s
Login Succeeded
Image does not exist remotely, pushing: registry.cloudflare.com/b6e9a2ec6a599a3fec8a63f9fc29c03d/browsershot-containers:22743b05
The push refers to repository [registry.cloudflare.com/b6e9a2ec6a599a3fec8a63f9fc29c03d/browsershot-containers]

 => => naming to registry.cloudflare.com/b6e9a2ec6a599a3fec8a63f9fc29c03d/browsershot-containers:22743b05                                                            0.0s
Login Succeeded
Image does not exist remotely, pushing: registry.cloudflare.com/b6e9a2ec6a599a3fec8a63f9fc29c03d/browsershot-containers:22743b05
The push refers to repository [registry.cloudflare.com/b6e9a2ec6a599a3fec8a63f9fc29c03d/browsershot-containers]

A

Alexander•7/10/25, 5:42 AM

Hey, is there a way to run integration tests using a Container DO? I've tried setting it up but keep running into

Error: Container is not enabled for this durable object class. Have you correctly setup your wrangler.toml?

Error: Container is not enabled for this durable object class. Have you correctly setup your wrangler.toml?

Error: Container is not enabled for this durable object class. Have you correctly setup your wrangler.toml?

Error: Container is not enabled for this durable object class. Have you correctly setup your wrangler.toml?

MMike Nomitch Hello again 👋 - Here with a general update on some common snags people are see...

A

Alexander•7/10/25, 5:05 PM

Any tips to try to resolve #4 except adding

max_instances

max_instances

max_instances

max_instances or updating to a basic / standard

instance_type

instance_type

want to be able to spin up containers on prod so bad

P.S. Opened a GitHub thread but tagging here for any changes / tips I might have missed)

S

snehendu•7/10/25, 5:26 PM

Hey everyone, does anyone know how to do programmatic deployment to cloudflare?

In my usecase, users would want to spin up a docker container from a docker image. But the thing is I want to do this programmatically as I will have the container code saved in R2

There will be multiple containers that will spin up from a single image and we need to take care of how to handle the deployment

K

Kraus•7/10/25, 9:18 PM

I am setting instance type to standard but the actual containers are still getting provisioned to 256mb of memory. How can I fix this?

Put more services on the one container?

Similar Threads

Similar Threads

Similar Threads